用HP图形计算器探索枪械后坐力问题

一、问题导入驳壳枪是整整几代中国人的一项集体记忆．不知你是否注意过，电影中的革命英雄们在开枪杀鬼子锄汉奸时总是横向握枪．这是为什么呢？经过讨论分析，我们觉得这是后坐力的结果，那么后坐力又是怎么一回事呢？通过查阅资料可得，后坐力产生的原因，从根本上讲是动量守恒的结果，即枪炮发射时产生的瞬间后退力量．大家对这个问题非常的感兴趣，并且决定合作搜集一些这方面的资料，了解研究、探讨一下这方面的知识．     

一种嵌入式关系模型的形式化描述

在 Ｎ Ｒ／ Ｔ 网的基础上,对基于嵌入式关系模型的数据库信息系统的行为,给出了一种形式化的描述方法,并设计了一个变迁点火执行算法     

氧离子与氦、氖原子碰撞中转移电离过程的研究

采用位置灵敏探测和散射离子-反冲离子飞行时间测量技术,测量了氧离子与氖和氦原子碰撞过程中转移电离截面与单电子俘获截面之比.通过比较发现测量结果与文献结果的趋势一致,并对测量结果进行了讨论.     

Transfer ionization cross-sections measured in collisions of highly charged argon ions with neon target

: Multiple electron transfer processes are studied for Arq+n- Ne (q= 8, 9, 11, 12) collisions by using multi-parameter coincidence techniques. Various electron transfer processes are identified experimentally and the related cross-sections are measured. The dependence of transfer ionization cross-sections on the recoil charge states is compared with the results from the modified molecular classical overbarrier model. It is found that the modified model described the experimental results reasonably.     

Multiple ionization of argon accompanied by electron loss and capture of 0.22-6.35 MeV C^q＋ ions

In this paper a projectile ions recoil ions coincidence technique is employed to investigate the target ionization and projectile charge state changing processes in the collision of 0.22-6.35 MeV Cq^＋ （q = 1 - 4） ions with argon atoms. The partial cross section ratios of the double, triple, quadruplicate ionization to the single ionization （or the single capture） of argon associated with single electron loss （or single electron capture） by the projectile are measured and compared with the previous experimental results. In the present experiment, it is observed that the ratios of ionization cross sections R associated with single loss and single capture depend strongly on the projectile charge state and vary significantly with different reaction channels as impact energy increases. In addition, this paper gets empirical scaling laws for the ionization cross section ratios R corresponding to the projectile single loss and finds that the ratios of the double ionization to the single ionization associated with single electron capture remain constant in the present energy range.     

含噻吩环大环Schiff碱及其镧、钍配合物的合成

合成了三种新型含噻吩环大环Ｓｃｈｉｆｆ碱及其中一种与镧，钍的配合物。它们的结构均经ＩＲ，ＨＮＭＲ和元素分析表征。     

X-Ray Emission from Zr, Mo, In and Pb Targets Bombarded by Slow Highly Charged Ar^q＋（q = 13, 14, 15, 16） Ions

We study the L x-ray emission from Zr, Mo and In targets and M x-ray emission from Pb target under bombardment of low energy Ar^q (q = 13, 14, 15, 16) ions. The relative x-ray yields were measured in the projectile kinetic energy range 210-360 keV. It is found that the relative x-ray yields from Zr, Mo and Pb targets increase with the increasing projectile kinetic energy for Ar^14 and Ar^16 projectiles and depend on the potential energy of the projectile remarkably.     

Oxygen vacancy control of electrical,optical, and magnetic properties of Fe0.05Ti0.95O2 epitaxial films

High-quality Fe-doped TiO₂ films are epitaxially grown on MgF₂ substrates by pulsed laser deposition. The x-ray diffraction and Raman spectra prove that they are of pure rutile phase. High-resolution transmission electron microscopy (TEM) further demonstrates that the epitaxial relationship between rutile-phased TiO₂ and MgF₂ substrates is 110 TiO₂₂. The room temperature ferromagnetism is detected by alternative gradient magnetometer. By increasing the ambient oxygen pressure, magnetization shows that it decreases monotonically while absorption edge shows a red shift. The transport property measurement demonstrates a strong correlation between magnetization and carrier concentration. The influence of ambient oxygen pressure on magnetization can be well explained by a modified bound magnetization polarization model.     

MgO/Al_2O_3吸附剂对CO_2动态吸附性能的研究

以γ-Al2O3为载体,采用等体积浸渍法制取MgO/Al2O3吸附剂,利用BET、XRD等表征手段对吸附剂进行表征;并通过固定床测量穿透曲线的方法研究其对CO2动态吸附性能的影响,考察了MgO负载量、吸附温度、气体流量等因素对吸附剂吸附CO2性能的影响,同时还通过多次吸脱附实验考察MgO/Al2O3吸附剂的稳定性和再生能力。结果表明,MgO负载量为10%的吸附剂,吸附温度在50℃左右,流量为45 mL/min动态吸附量最大;经数次循环后材料的结构性质和吸附性能未见明显变化,可再生性能比较优异,是一种潜在的可工业化应用的CO2吸附剂。     

磷酸盐辅助一步合成介孔Beta分子筛

在合成纳米Beta分子筛的体系中添加磷酸二氢钠等无机盐,通过一步晶化制备介孔Beta分子筛.纳米分子筛组装形成的二次粒子克服了传统纳米粒子难以过滤分离的问题,同时所形成的粒间介孔改善了分子在催化剂内的扩散从而提高催化反应效率.采用X射线衍射、扫描电镜、氮吸附-脱附和氨程序升温脱附等表征方法对材料进行表征,结果表明磷酸二氢钠的用量对介孔体积有很大影响.当NaH2PO4/SiO2摩尔比为0.1时,合成的材料具有较好的孔结构和酸性,并在叔丁醇与苯酚的液相烷基化反应中表现出最好的催化活性.