Study of the State of Water and Oil in Frozen Emulsions Using Time Domain NMR

Here T(1) and T(2)(*) relaxation time measurements by low-field NMR have been used to quantify the state of oil and water in frozen emulsions. Water-in-oil and oil-in-water emulsions have been studied. A discrete method (NLREG program) and a continuous method (CONTIN program) have been used to analyze the FID and inversion-recovery relaxation curves. The FID signal (T(2)(*)) analysis allowed us to calculate the global solid-intermediate-liquid ratio, and the state of the solid and liquid phases was determined by the T(1) values. Thus we have been able to show that the major part of water ( approximately 99%) is in a solid state in such emulsions (average droplet diameter of about 1.5 &mgr;m). This result was confirmed by the study of a solid paraffin-Span 80-water emulsion and a heavy water-caseinate-triolein emulsion. These first results have shown the interest of this new method for the study of the state of water and oil in frozen emulsions. Copyright 2000 Academic Press.     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

Uncoupled metabolism stimulated by chemical uncoupler and oxic-settling-anaerobic combined process to reduce excess sludge production

The effects of three uncoupled metabolic systems (conventional activated sludge process with the addition of 3,3′,4′,5-tetrachlorosalicylanilide [TCS], oxic-settling-anaerobic [OSA] process modified by insertion of a sludge-holding tank in the sludge return line, and TCS and OSA combined process) on reducing excess sludge production were studied. Compared with the control conventional activated sludge process, the most effective system was the combined process, which could reduce excess sludge production by 46.90%. The 180-d operation results confirmed that TCS is an effective chemical uncoupler in reducing the sludge yield but that it had an adverse effect on substrate removal capability, effluent nitrogen concentration, and sludge settleability. The OSA process decreased excess sludge production by only 26% but had less adverse effect on effluent quality and could improve sludge settleability. The effluent total phosphorous concentration of the three systems was slightly lower than of the control unit. Microbial populations were monitored by both microscopic and molecular biologic analysis method (polymerase chain reaction [PCR]-denaturing gradient gel electrophoresis [DGGE]). The presence of TCS caused metazoans to disappear and decreased the number and activity of protozoa. PCR amplification of 16S rRNA and sequent DGGE analysis found a shift in the diversity of the predominant species. The results imply that OSA combined with the chemical uncoupler process may effectively reduce excess sludge yield and not affect process performance significantly.     

Numerical analysis of electroosmotic flow in dense regular and random arrays of impermeable, nonconducting spheres

We present a numerical scheme for analyzing steady-state isothermal electroosmotic flow (EOF) in three-dimensional random porous media, involving solution of the coupled Poisson, Nernst-Planck, and Navier-Stokes equations. While traditional finite-difference methods were used to resolve the Poisson-Nernst-Planck problem, the (electro)hydrodynamics has been addressed with high efficiency using the lattice-Boltzmann method. The developed model allows simulation of electrokinetic transport under most general conditions, including arbitrary value and distribution of electrokinetic potential at the solid-liquid interface, electrolyte composition, and pore space morphology. The approach provides quantitative information on a spatial distribution of simulated velocities. This feature was utilized to characterize EOF fields in regular and random, confined and bulk packings of hard (i.e., impermeable, nonconducting) spheres. Important aspects of pore space morphology (sphere size distribution), surface heterogeneity (mismatch in electrokinetic potentials at confining wall and sphere surface), and fluid phase properties (electrical double layer thickness) were investigated with respect to their influence on the EOF dynamics over microscopic and macroscopic spatial domains. Most important is the observation of a generally nonuniform pore-level EOF velocity profile in the sphere packings (even in the thin double layer limit) which is caused by pore space morphology and which is in contrast to the pluglike velocity distribution in a single, straight capillary under the same conditions.     

Bioelectronic detector with monoamine oxidase for halitosis monitoring

Methyl mercaptan (MM) is known as one of the major chemicals of halitosis (bad breath). In this study, a bioelectronic gas sensor (bio-detector) for gaseous MM was developed and was applied to measure halitosis in breath. The bio-detector consisted of a Clark-type dissolved oxygen electrode, a monoamine oxidase type-A (MAO-A) immobilized membrane and a reaction unit that had liquid and gaseous compartments separated by a hydrophobic porous polytetrafluoroethylene (PTFE) diaphragm membrane. The tip of the electrode covered with MAO-A membrane was placed into the liquid compartment as touching to the PTFE diaphragm membrane. In order to amplify the bio-detector output, a substrate regeneration cycle caused by coupling the monooxygenase with l-ascorbic acid as reducing reaction with reagent system, was applied. The results of MM vapor measurements showed the calibration range of the bio-detector for MM vapor was from 0.087 to 11.5 ppm (correlation coefficient: 0.993) and included the human sense of smell level 5 (0.2 ppm). The bio-detector had good selectivity being attributed to enzyme specificity was obtained for several substances (trimethyl amine, ammonia, dimethyl sulfide, etc.). The bio-detector was applied for halitosis measurement. Expired gases in five subjects were sampled every hour and the concentrations of MM in the expired gases were monitored. The output of bio-detector showed behaviour of halitosis level changes in a day such as increasing with passage of time and decreasing after eating.     

New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.