吸波材料研究现状及碳团簇型吸波材料设计

简要介绍了铁氧体吸波材料，手性材料，金属微粉吸波材料，导电高聚物材料，多晶铁纤维材料，纳米材料和智能隐身材料的研究和应用现状。并根据吸波材料工作原理，进行碳团簇型吸波材料实验研究，结果显示，所制样品有很好的吸波性能，在总厚度为2．11mm的情况下，在8．2～12．4GHz频带内，最大反射衰减可达-29dB，有效频宽占总带宽的100％，基本达到实用水平。     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.     

Optimal conclusive teleportation of a d-dimensional two-particle unknown quantum state

A conclusive teleportation protocol of a d-dimensional two-particle unknown quantum state using three d- dimensional particles in an arbitrary pure state is proposed. A sender teleports the unknown state conclusively to a receiver by using the positive operator valued measure（POVM） and introducing an ancillary qudit to perform the generalized Bell basis measurement, We calculate the optimal teleportation fidelity. We also discuss and analyse the reason why the information on the teleported state is lost in the course of the protocol,     

Ultrasonic Study on Jahn-Teller Distortions in La1=3Sr2=3CoO3

系统研究了La1=3Sr2=3CoO3单相多晶样品在低温下的电磁输运性质和超声特性．电阻率测量表明,La1=3Sr2=3CoO3在整个温区内都表现出金属特性,并且在235 K处电阻率-温度曲线的斜率发生了变化,同时伴随着铁磁相变．超声声速在铁磁相变温度以下出现软化,并在120 K附近达到最小,之后,随着温度的进一步降低,声速开始硬化,同时出现了一个宽大的超声衰减峰．分析认为,该超声异常可能起源于中等自旋态Co3+的Jahn-Teller效应．     

离子声孤子在不均匀等离子体中的传播特性

本文考虑了离子的有限温度和离子与中性分子的碰撞,讨论离子声孤子在电离导致的弱不均匀等离子体中的传播特性,得到自洽的非均匀浓度分布N(x),漂移速度分布V(x)和相应的孤子解,数值计算给出孤子幅度、速度、宽度随位置的变化,所得结果合理并与实验相符。 关键词：     

基于Copula的VsR度量与事后检验

估计VaR的传统方法有三种:协方差矩阵法、历史模拟法和蒙特仁洛模拟法。通常,文献中认为刚蒙特卡洛模拟法度量VaR有很多方面的优点。但是,本文通过实证检验发现,使用传统蒙特卡洛模拟法估计的VaR偏小,事后检验效果很不理想。本文引入Copula函数来改进传统的蒙特卡洛模拟法。Copula函数能将单个边际分布和多元联合分布联系起来,能处理非正态的边际分布,并且它度量的相关性不再局限于线性相关性。实证检验表明,基于Copula的蒙特卡罗模拟法可以更加准确地度量资产组合的VaR。     

关于参数型copula函数的拟合检验

在金融和保险中,copula函数是一种构造多元相关分布函数的有力工具．然而,怎样选择一个适当的copula函数用于拟合数据,并没有找到统一的方法．因此,基于copula函数的经验分布,我们提出了一种用于检验具有某种特定参数结构的copula函数拟合数据优良性的方法,并得到了此检验的渐近性质．由于该检验统计量的极限分布依赖未知参数,我们采用非参数蒙特卡罗方法确定临界值．我们做了一个简单的模拟来验证本文提出的检验方法的功效．     

近红外光谱法测定蜂蜜中主要成分的可行性研究

以153个单植物源和混合植物源蜂蜜样品为研究对象,使用３种近红外光谱仪(FT型、CCD型、PDA型)采集蜂蜜的透反射和透射光谱,并应用近红外定量分析技术进行蜂蜜中主要成分(水分含量、果糖含量、葡萄糖含量)的检测研究。用偏最小二乘回归(partial least square repression, PLSR)方法分别建立了蜂蜜水分含量、果糖含量、葡萄糖含量的近红外定量分析模型。结果表明,水分含量、果糖含量、葡萄糖含量的相关系数(r)分别达到0.978 5, 0.931 1和0.890 7,预测误差均方根(RMSEP)分别为0.410 8(%), 1.914 4(%)和2.531 9(%)。研究表明基于近红外光谱的蜂蜜主要成分快速无损检测准确度高,具有很高的实用价值。     

The characteristics of O＋HD （v = 0, j = 0） reaction dynamics

The analytical potential energy function of HDO is constructed at first using the many-body expansion method.The reaction dynamics of O+HD(v = 0,j = 0) in five product channels are all studied by quasi-classical trajectory(QCT) method.The results show that the long-lived complex compound HDO is the dominant product at low collision energy.With increasing collision energy,O+HD → OH+D and O+HD → OD+H exchange reactions will occur with remarkable characteristics,such as near threshold energies,different reaction probabilities,and different reaction cross sections,implying the isotopic effect between H and D.With further increasing collision energy(e.g.,up to 502.08 kJ/mol),O+HD → O+H+D will occur and induce the complete dissociation into single O,H,and D atoms.     

Characterization of a velocity-tunable 87Rb cold atomic source with a high-speed imaging technology

This paper has developed and characterized a method to produce a velocity-tunable 87 Rb cold atomic source for atomic interferometry application.Using a high speed fluorescence imaging technology,it reports that the dynamic process of the atomic source formation is observed and the source performances including the flux and the initial velocity are characterized.A tunable atomic source with the initial velocity of 1.4～2.6 m/s and the atomic source flux of 2 × 10 8 ～ 6 × 10 9 atoms/s has been obtained with the built experimental setup.