XGS—12型高速电影摄影机

XGS-12型摄影机是西安光机所新近推出的又一种16mm棱镜补偿式高速电影摄影机,其画幅尺寸为7.5×10.4mm~2时的最高拍摄频率为11000fps。该机性能优异,附件齐全,本文对该机将从光学系统摄影机和电控制系统三个部分加以介绍。     

Creation from Nothing：A New Model

We try to propose a new model of the creation of Universe.First,the de Sitter spacetime is created from nothing and then we obtain an anti-de Sitter spacetime which has closed time-like curves by analytical continuation.We know that the anti-de Sitter spacetime is classically unstable,so it is easier to create an inflationary bubble universe as that we live in.     

洞察表面原子和电子结构的隧道显微镜

具有原子显象能力的扫描隧道显微镜（ＳＴＭ,ｓｃａｎｎｉｎｇｔｕｎｎｅｌｉｎｇｍｉｃｒｏｓｃｏｐｙ）,不仅能在原子尺度范围内显示定域的表面原子结构的象,而且能同时获得定域的表面电子结构等方面的信息．对长期争执不休的Ｓｉ（１１１）７×７,Ａｕ（１１０）,Ａｕ（１００）的表面再构及氧在Ｎｉ（１１０）表面吸附等复杂问题,首次给出准确可靠的表面原子结构的信息．ＳＴＭ的发明使人们对原子世界的认识大为深化?...     

Rb（5PJ）＋Rb（5PJ）→Rb（5JS）＋Rb（nl=5D，7S）碰撞能量合并

研究了Rb(5PJ)+Rb(5PJ)→Rb(nlJ')+Rb(5S)碰撞能量合并过程,利用单模半导体激光器分别共振激发Rb原子的5P1/2或5P3/2态,利用另一与泵浦激光束反向平行的单模激光束作为吸收线探测激发态原子密度及其空间分布,吸收线分别调至5P1/2→5D3/2和5P3/2→7S1/2跃迁.由激发态原子密度和谱线荧光比得到碰撞能量合并过程的截面,对5P3/2激发,碰撞转移得到5D5/2,5D3/2和7S1/2的截面分别是(1.32士0.59)×10-14,(1.18士0.53)×10-14和(3.21士1.44)×10-15cm2;对5P1/2激发,碰撞转移到5D5/2和5D3/2的截面分别是(6.57士2.96)×10-15和(5.90士2.66)×10-15cm2.与其他的实验结果进行了比较.     

金属冲击温度的辐射法测量问题

 金属的冲击温度及熔化温度测量对构建其完全状态方程具有重要意义。简要综述了用于金属冲击温度及熔化温度辐射法测量的一维热传导理想界面模型和非理想界面模型,并着重对模型中明示或隐含的关键假定的合理性、影响金属冲击温度与熔化温度结果的主要因素进行了分析、讨论,以期对实验数据有一个合理的评估。还讨论了求解理想和非理想界面模型一维热传导方程界面温度时所隐含的冲击压缩下热导率不随温度而变、冲击压缩下金属样品/窗口界面辐射的灰体假定,以及窗口材料的透明性、非理想界面模型中表观界面温度的修正、动载条件下金属高压熔化温度的测量、界面的非Flourier热传导等问题。分析结果表明,目前采用辐射法测量大致可以得到冲击温度,在发生熔化的情况下可获得熔化温度,但离精密测量的要求还有较大差距。     

人体胆结石成分及无机元素的分析探讨

本文运用三种仪器对胆结石中无机元素含量和成分进行测定,对照标准谱图分析.四个样品的主要成分均为胆固醇,含有较多的元素依次为Ca、Na、P、K和Mg.通过所得结果对胆固醇的成因、无机元素含量变化的作用进行了讨论.     

Investigation of Impurity Ion Transport with Laser Blow-off in HL-2A Tokamak

Non-recycling impurities are injected into ohmic HL-2A plasma for the first time. The impurities of titanium and aluminium are injected in the discharges with varying plasma density and current. The convection and diffusion process of the injected impurity ions during the inward phase are qualitatively investigated. The results show that the transport of impurities is much slower in the central region of the plasma than outside of it and that it is greatly enhanced during sawtooth crashes.     

Fe3O4 Segregation and Transport Properties of La0.67Ca0.33MnO3

Effect of Fe3O4 segregation at grain boundaries on the electrical transport and magnetic properties of La0.67Ca0.33MnO3 is investigated. The experimental results show that the Fe3O4 segregation not only shifts the paramagnetic-ferromagnetic transition temperature of La0.6TCa0.33MnO3 to a lower temperature region but also induces a new transition in a lower temperature region. Meanwhile, the transition processes observed in both the resistivity and magnetization curves are obviously widened. Compared to pure La0.67Ca0.33MnO3, we assume that the Fe3O4 segregation level at the grain boundaries can modify the electrical transport and magnetic properties of La0.67Ca0.33MnO3.     

Electrical Properties of La-Doped Al2O3 Films on Si （100） Substrates as a High-Dielectric-Constant Gate Material

Amorphous La-doped Al2O3 （La： Al2O3） thin films are deposited on n-type （100） Si substrates by rf magnetron co-sputterlng. The composition of the deposited films is measured by energy dispersive x-ray spectroscopy： Capacitance-voltage measurement shows that the dielectric constant k of La-doped Al2O3 films ranges from 8.5 to 11.6 with the increasing La content, and the highest k value of 11.6 is obtained for the 20.14% La content film. In the structure of the Al/La：Al2O3/Si metal oxide semiconductor, the dominant conduction stems from the space- charge-limited current at different temperatures. In addition, the wavelength dependence of the transmittance is studied by ultraviolet spectroscopy and the band gap of all the deposited films is above 5.5eV. The results demonstrate that La-doped Al2O3 can meet the requirement of next-generation gate materials.     

Influence of Yb-Doped Nanoporous TiO2 Films on Photovoltaic Performance of Dye-Sensitized Solar Cells

Yb-doped TiO2 pastes with different Yb/TiO2 weight ratios are prepared in the sol-gel process to obtain dyesensitized solar cells （DSCs）. The nanocrystalline size of Yb-TiO2 becomes smaller and the lattice parameters change. Lattice distortion is observed and dark current is detected. It is found that a part of Yb existing as insulating oxide Yb2O3 state acts as barrier layers at the electrode-electrolyte interface to suppress charge recombination. A Yb-doped TiO2 electrode applied in DSCs leads to a higher open-circuit voltage and a higher fill factor. How the Yb-doped TiO2 films affect the photovoltaic response of DSCs is discussed.