Excited States in ^18Ne Studied via ^17F＋p

The elastic resonance scattering of ^17F＋p is studied in inverse kinematics via a thick-target method. The excitation function for ^17F＋p elastic scattering is obtained within the energy interval of Ec.m ≈ 0.4-1.7 MeV. The experimental excitation function is analyzed with a multilevel R-matrix code MULTI7, and the proton widths are deduced. The α decay from 6.15 MeV 1- state in 18Ne is observed, which is critical to the 14O（α, p）17F reaction as the main breakout route from CNO cycle to rp-process in supernovae and x-ray bursts.     

�������Һ̬﮻�·��������Ƽ��������н��

为了研究等离子体与自由液态锂表面相互作用的物理过程,建立了用氩气驱动的液态锂回路装置。介绍了建立的液态锂回路装置的组成部分、技术参数及运行原理。此回路主要由主回路、等离子体与液态锂相互作用试验段和单阴极高密度等离子体发生装置三部分组成。目前,此回路已取得一些初步的模拟结果和实验结果。     

基于变系数Hawkes过程的新型冠状病毒肺炎的传播强度分析

当前,新型冠状病毒肺炎(COVID-19)在全球大部分地区肆虐,对人类生命安全和社会经济活动带来严峻挑战.新型冠状病毒肺炎的传播强度随时间的变化规律及其影响因素是传染病学家关心的重要问题.基于新型冠状病毒肺炎病例数,本文提出变系数Hawkes过程,分析日本,韩国以及北京市,武汉市新冠肺炎传播强度随时间变化的趋势,评估突发事件和政府采取的干预措施对疫情防控的影响.本文基于样条逼近技术建立半参数估计方法,数值模拟结果表明所提出方法在有限样本下具有良好表现.该研究可为疫情防控提供有益的统计建议.     

多针-网电极离子风激励器推力与推功比的实验研究

本文搭建了一种无摩擦气垫悬浮测试平台测量了19针和31针-网电极离子风激励器产生的推力特性, 为多针-网电极离子风激励器作为新型动力源提供动力控制方法. 通过研究多针-网间隙、针-针间距、针尖曲率半径和电晕电压电流对离子风激励器推力特性的影响, 提出了在低功耗下产生较大推力的方法, 改善离子风激励器对低功耗与大推力的需求不能同时满足的现状. 关键词： 多针-网电极 离子风 推力 推功比     

PET共混改性研究

综述了国内外PET共混改性的研究现状 ,并介绍了近年来PET共混研究的新发展     

L形通道布线的展开法

本文提出将L形通道展成直通道的布线方法，对展开后的直通道定义了水平约束、垂直约束、拐角约束、走线约束，利用赋权的混合图反映这四种约束、并逐步将图中的无向边转变成有向边，按照有向图的线网上下关系，完成直通道布线，再收缩冗余布线区变成L形通道布线.     

水中脉冲放电产生过氧化氢及其影响因素

采用介质涂覆的球-筒电极结构,用以脉冲电压条件下在水中产生放电,通过比色法检测放电产生的过氧化氢,研究了不同电压脉冲幅值、脉冲宽度（储能电容的大小）、水的电导率以及脉冲频率对过氧化氢产生速率的影响,实验结果表明过氧化氢的产率随电压脉冲幅值的增大而增大。当电压脉冲幅值足够高时,水中放电由流注放电形式转换为电弧放电形式,此时过氧化氢产率也大幅提高,而在相同电压条件下,随水的电导率的增大,过氧化氢的产率减小。在相同电压下,脉冲频率的增大,导致放电平均功率增大,水中放电产生过氧化氢的浓度提高。在3.3 W功率时,120 min后水中过氧化氢浓度达到0.2 mmol/L,从而证明了所用电极结构的优越性。     

Morphological and structural damage investigation of nanostructured molybdenum fuzzy surface after pulsed plasma bombardment

Steady high-flux helium (He) plasma with energy ranging from 50 eV to 90 eV is used to fabricate a fiber-form nanostructure called fuzz on a polycrystalline molybdenum (Mo) surface. Enhanced hydrogen (H) pulsed plasma in a wide power density range of 12 MW/m²-35 MW/m² is subsequently used to bombard the fuzzy Mo, thereby simulating the damage of edge localized mode (ELM) to fuzz. The comparisons of surface morphologies, crystalline structures, and optical reflectivity between the original Mo and the Mo treated with various He⁺ energy and transient power densities are performed. With the increase of He ion energy, the Mo nano-fuzz evolved density is enlarged due to the decrease of filament diameter and optical reflectivity. The fuzz-enhanced He release should be the consequence of crystalline growth and the lattice shrinkage inside the Mo-irradiated layers (~200 nm). The fuzz induced by lower energy experiences more severe melting damage and dust release under the condition of the identical transient H plasma-bombardment. The H and He are less likely to be trapped due to aggravated melting evidenced by the enhanced crystalline size and distinct lattice shrinkage. As the transient power density rises, the thermal effect is enhanced, thereby causing the fuzz melting loss to aggravate and finally to completely disappear when the power density exceeds 21 MW/m². Irreversible grain expansion results in huge tensile stress, leading to the observable brittle cracking. The effects of transient thermal load and He ion energy play a crucial role in etching Mo fuzz during ELM transient events.     

基于元认知视角的“说数学”探究

1元认知理论概述 1976年,弗拉维尔（Flavell,JohnH．1928～）提出“元认知”的术语．他指出,元认知通常被广泛地定义为任何以认知过程与结果为对象的知识,或是任何调节认知过程的认知活动．元认知的核心意义是对认知的认知．即元认知是认知主体对自我心理状态、能力、任务目标、认知策略等方面的认识,     

316L������ھ�̬Һ̬��еĸ�ʴ��Ϊ�о�

利用脉冲激光诱导击穿光谱仪(LIBS)结合SEM、EDX和维氏硬度(HV)等分析手段,分析了316L不锈钢在350℃的液态锂中静态腐蚀500h后的腐蚀特性.微观形貌分析表明:样品存在较明显的晶间腐蚀,其腐蚀层厚度约为2.7μm.硬度分析表明:腐蚀后表面硬度值约HV234.72,约是腐蚀前硬度值的0.78倍.LIBS组分分析表明:经液态锂腐蚀后的样品表面Ni、Cr等元素含量相对减少;在被腐蚀区域Li元素含量随激光击打深度的增加而减少,而Ni、Cr等元素含量与之近似呈成正比递增;母材区Li元素的渗透深度约3.5μm,约是焊缝区的0.6倍.