A Mathod to Solve Systems of Fuzzy Linear Equations

§１．　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｉｓｐａｐｅｒ，ｗｅｗｉｌｌｃｏｎｃｅｒｎｗｉｔｈｓｏｌｖｉｎｇｔｈｅｓｙｓｔｅｍｓｏｆｆｕｚｚｙｌｉｎｅａｒｅｑｕａｔｉｏｎｓＡｘ＝ｂｆｏｒｘ，ｗｈｅｒｅＡｉｓａｍａｔｒｉｘｏｆｆｕｚｚｙｎｕｍｂｅｒｓ；ｘａｎｄｂａｒｅｖｅｃｔｏｒｓｏｆｆｕｚｚｙｎｕｍｂｅｒｓ．Ｉｎ［２］，ｕｓｉｎｇｔｈｅｎｅｗｓｏｌｕｔｉｏｎｃｏｎｃｅｐｔ，ｓｉｘｎｅｗｓｏｌｕｔｉｏｎｓａｒｅｄｅｆｉｎｅｄ．Ｔｈｉｓｄｉｓｃｕｓｓｉｏｎｗａｓｒｅｓｔｒｉｃｔｅｄｔｏｓｑ…     

不等长周期时间序列的周期划分方法

针对时间序列周期不等长的情况,提出了一种基于周期划分的时间序列周期分析方法.首先将时间序列变换到频域中获取序列的周期特征,其次根据周期特征计算移动平均的项数来对时间序列做移动平均处理,然后计算移动平均处理后序列中的极值点,最后对极值点按条件进行剔除后得到周期划分点.以划分点为界划分得到时间序列的多个周期段,经过分析采用周期段的中位数线来表示时间序列的周期性变化特征.这种周期划分方法更适用于存在随机波动的长序列,实验表明该方法能较好地对序列做出划分,得到的周期段中位数线的变化特点也与原时间序列基本相符.     

High－Power Blue Light Generation by External Frequency Doubling of an Optical Parametric Oscillator ＊

We report on an all-solid-state high-power quasi-continuous blue light source by the frequency doubling of asignal wave from an optical parametric oscillator (OPO). A 50-mm-long LiB305 (LBO) crystal is used for theOPO, which is pumped by a diode-pumped Nd:YAG green laser (1OkHz, 50ns). Tunable blue emission in a newnonlinear crystal BiB306 (BiBO) is obtained with a wavelength range from 450 to 495 nm. The average power ofthe signal output is as high as 9.3 W from 924 to 970nm. The maximum output of the blue laser with the secondharmonic walk-off compensation is 1.3W average power at 470nm for 6.2W of OPO signal light at 940nm.     

光纤参数对长周期光纤光栅谐振波长的影响

从光栅周期、折射率调制深度、包层半径和芯层半径对长周期光纤光栅的谐振波长的影响进行了研究。这些结果对于选择合适的光纤合理设计光栅周期以增加其敏感性具有一定的意义。     

激光刻蚀对镀金表面二次电子发射的有效抑制

使用红外激光刻蚀技术在镀金铝合金表面制备了多种形貌的微孔及交错沟槽阵列.表征了两类激光刻蚀微阵列结构的三维形貌和二维精细形貌,分析了样品表面非理想二级粗糙结构的形成机制.研究了微阵列结构二次电子发射特性对表面形貌的依赖规律.实验结果表明:激光刻蚀得到的微阵列结构能够有效抑制镀金表面二次电子产额(secondary electron yield,SEY),且抑制能力明显优于诸多其他表面处理技术;微阵列结构对SEY的抑制能力与其孔隙率及深宽比呈现正相关,且孔隙率对SEY的影响更为显著.使用蒙特卡罗模拟方法并结合二次电子发射唯象模型和电子轨迹追踪算法,仿真了各微结构表面二次电子发射特性,模拟结果从理论上验证了微阵列结构孔隙率及深宽比对表面SEY的影响规律.本文获得了能够剧烈降低镀金表面SEY的微阵列结构,理论分析了SEY对微结构特征参数的依赖规律,对开发空间微波系统中低SEY表面及提高镀金微波器件性能有重要意义.     

Three-dimensional simulation method of multipactor in microwave components for high-power space application

Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.     

自发有序Ga0.5In0.5P合金的静压光致发光研究

在０—７ＧＰａ静压范围内测量了自发有序Ga_0.5In_0.5P合金的室温光致发光谱．三块样品的常压带隙能量分别比无序样品低１１５，９２和４３ｍｅＶ，它们的压力系数也从无序样品的９２ｍｅＶ／ＧＰａ分别减小到７５，８１和８３ｍｅＶ／ＧＰａ．用Γ-Ｌ相互作用模型可以同时解释有序合金的带隙能量的降低以及压力系数的减小．得到的Γ-Ｌ相互作用势分别为０.１９，０.１５和０.１０ｅＶ．表明在自发有序Ga_0.5In_0.5P合金中存在着的     

Analysis of secondary electron emission using the fractal method

Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surface topography. The results show that when the characteristic length scale of the surface, G, is larger than 1 × 10^-7, the surface roughness increases with the increasing fractal dimension D. When the surface roughness becomes larger, it is difficult for entered electrons to escape surface. As a result, more electrons are collected and then SEY decreases. When G is less than 1 × 10^-7,the effect of the surface topography can be ignored, and the SEY almost has no change as the dimension D increases. Then,the multipactor thresholds of a C-band rectangular impedance transfer and an ultrahigh-frequency-band coaxial impedance transfer are predicted by the relationship between the SEY and the fractal parameters. It is verified that for practical microwave devices, the larger the parameter G is, the higher the multipactor threshold is. Also, the larger the value of D,the higher the multipactor threshold.     

基于剪纸方法的一种可重构线极化转换空间序构超表面

随着智能技术的发展, 具有可调的电磁波极化转换器件对于实际应用来说至关重要. 目前大多数基于PIN二极管、变容二极管来实现电可调, 这些方法操作简单、实时性强, 但仍存在平面序构调控自由度少、电路复杂、成本较高等问题. 鉴于此, 本文提出了一种基于剪纸结构的可重构极化转换超表面, 通过调节折叠角度b改变磁偶极子之间的相...     

电站锅炉系统性能仿真模型的建立

1引言根据热力学第二定律，燃料中的化学拥将近一半损失在锅炉的燃烧与传热过程中。因此，优化锅炉性能对降低整个火电机组的煤耗率具有明显效果。完整的锅炉系统由磨煤机、送风机、一次风机、弓讯机、炉膛、汽包、过热器、再热器、省煤器、空气预热器等单元组成，这些单元之间的联结错综复杂。本文建立了锅炉系统中通用单元的性能模型，并在此基础上，对锅炉系统的结构特点进行了分析，利用过程系统工程中的序贯模块法建立了整个锅炉系统的性能模型。对单元的划分、回路的切断及断裂流股的收敛与迭代策略提出了自己的观点。最后根据生产厂…