顶发射白光OLED器件制备及其色坐标漂移机制研究

采用了高反射率金属Al和电化学性能稳定的金属Mo,在硅基底上制备了多层结构的 Al/Mo/MoO₃阳极,并研究了不同MoO₃厚度下多层阳极的反射率。在此基础上,通过发光层共掺杂制备了顶部发光OLED器件,并对器件发光机制进行了系统研究和分析。实验结果表明：采用发光层共掺杂制备的顶部发光OLED器件的色坐标,随电流密度或电压的增加而发生漂移;OLED器件色坐标漂移的原因是三基色发光强度随电流密度的增加,逐渐偏离了形成白光(0.33, 0.33)所需三基色强度比例值,导致了OLED器件的色坐标发生了漂移,其机制是发光层中主-客之间能量转移和陷阱共同作用的结果。进一步研究发现,在不同电压下,红光发光强度随驱动电压(或电流密度)增大而线性地减小。     

高效液相色谱-串联质谱法同时测定供港生猪尿液中29种限用兽药残留

建立了高效液相色谱-串联质谱(HPLC-MS/MS)同时测定生猪尿液中喹诺酮类、磺胺类、磺胺增效剂、四环素类、林可胺类、大环内脂共29种限用兽药残留量的检测方法。试样经乙酸铵和EDTA-Na缓冲液提取,HLB固相萃取小柱净化后,HPLC-MS/MS进行测定,其中β-受体激动剂类用内标法定量,其余兽药用外标法定量。在电喷雾电离正离子模式下,以多反应监测(MRM)方式采集数据进行定性与定量分析。29种兽药在猪尿基质中标准曲线的线性系数(r)均大于0.99,3个不同加标水平下的平均回收率为58%~108%,日内相对标准偏差(RSD)为1.9%~18.9%,日间RSD为3.4%~20.9%;定量下限(LOQ,S/N≥10)为1.0~10.0μg/L。该方法经济、高效、可靠,可用于生猪屠宰前兽药多残留的快速检测。     

Three-dimensional simulation method of multipactor in microwave components for high-power space application

Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.     

Measurement of 129Xe frequency shift due to Cs–129Xe collisions

Enhancement factor K0, which characterizes NMR and EPR frequency shifts for Cs-129Xe, is measured for the first time. The enhancement factor r-o was measured to be （702±41） at 80 ℃ and （653±20） at 90 ℃, using the NMR frequency shift, detected by atomic magnetometer at a low magnetic field of 100 nT. This result is useful for predicting the EPR frequency shifts for Cs and the NMR frequency shifts for 129Xe in spin-exchange cells.     

Plasmon-induced absorption in stacked metamaterials based on phase retardation

In this paper, based on the constructive interference of plasmonic dipolar and quadrupolar modes, a classical analogue of electromagnetically induced absorption （EIA） is demonstrated theoretically in a stacked metamaterial consisting of a short metal strip （which acts as a bright resonator） and a long metal strip （acting as a dark resonator）, which has been reported to support the electromagnetically induced transparency （EIT） effect. The transition from EIA to EIT can be clearly observed in the absorbance spectra via varying the vertical spacing between two resonant oscillators. With the help of the coupled two-oscillator model, the phase shift between the bright and dark resonance modes is calculated by fitting the simulated absorbance spectra, which reveals the physical mechanisms behind constructive and destructive interference effects in EIT/EIA metamaterials.     

Full period superconducting section physics design for injector Ⅱ of China-ADS

The China Accelerator Driven Subcritical System (China-ADS) project, which is a strategic plan and aims to design and build an ADS demonstration facility, has been proposed and launched actively in China. Injector Ⅱ as one of the parallel injectors of China-ADS, and is prompted by the Institute of Modern Physics (IMP). In this paper, a new scheme with full period lattice structure for the SC section is proposed. In the new scheme, there are sixteen periods, with one superconducting solenoid and one superconducting cavity included in each period. All of the elements are contained in four cryomodules. The dreadful influence of the mismatch caused by period structural change can be avoided, and the beam quality is favorable. In addition, this new scheme has certain advantages in reducing the project's difficulty and construction risk. The details of the design and beam dynamic simulation for the full period lattice structure are given in this paper.     

HWR腔水平测试恒温器热辐射屏设计与测试

低温恒温器是超导直线加速器的重要部件之一,其为超导腔及超导磁铁提供稳定的低温环境。文中介绍了HWR单腔水平测试恒温器(TCM1)中热辐射屏的设计、模拟计算、安装与测试。     

低温液氧在水平管上降膜流动特性模拟研究

为了探索低温液氧在水平管上的降膜流动特性,采用VOF模型模拟计算了不同工质、液氧饱和压力、椭圆率E对液膜厚度的影响。研究结果表明：在近似相等的Ka数下,液氧(Ka=5 382)的瞬时液膜厚度的波动振幅和局部液膜厚度最小,其次是丙烷(Ka=5 387)的、最大是水(Ka=5 344)的。瞬时液膜厚度振动幅度和局部液膜厚度随着Ka数增大而减小。在Re=1 500、D=25.4 mm时,平均液膜厚度在Ka=3 522～6 553范围内的降幅为54%。在E=1～2.5区间,局部液膜厚度随着椭圆率E的增大而减小,但是降低幅度趋缓。拟合了考虑椭圆率的液氧局部液膜厚度关联式,90%预测值和模拟值之间的相对偏差控制在±20%范围内。     

发动机喷流对火箭气动特性影响

开展了考虑底部发动机喷流影响的火箭气动特性CFD仿真设计,比较了有/无喷流时火箭附近流场结构、表面压力分布、整体气动力/力矩特性在亚/超声速段的差异,结果显示,发动机喷流对火箭亚声速段的轴向力、法向力和俯仰力矩特性均有较为显著的影响,且有减小尾部空气舵气动控制力矩的影响,而超声速段的影响仅限于轴向力。该仿真结果与飞行试验气动辨识结果较为一致。基于仿真分析结果,可建立一种折中考虑喷流影响的气动特性设计方法,供火箭精细化气动特性设计参考使用。      

复标度方法对原子核单粒子共振态的研究

在相对论平均场理论框架下, 利用复标度方法研究了 Zr 同位素的单粒子共振问题. 以 ¹²²Zr 为例, 演示了复标度方法确定共振态的具体步骤, 确定了 ¹²²Zr 所有可能共振态的能量和宽度, 以及相应共振态的复标度波函数, 并与耦合常数的解析延拓方法进行了比较.在此基础上, 进一步系统研究了 Zr 同位素的共振问题, 获得了与散射相移方法一致的结果.