利用J2432交流电特性演示仪做自感演示实验

利用J2432演示仪和指针式演示电表演示了自感过程中电感的电流与电压的相位关系。     

机载海洋激光测深系统参量设计与最大探测深度能力分析

详细讨论了机载海洋激光测深系统最大测量深度与相关因子之间的关系，并利用最小可探测信噪比为判据，对机载海洋激光测深系统在白天和晚上工作进行了数值模拟，通过比较最大测量深度与激光脉冲峰值功率、接收视场角、接收口径和光谱接收带宽等关系，确定了系统的主要参量。以确定的参量建立的系统具有白天49m和晚上65m的最大测深能力，可完全满足在沿岸带以及岛礁的测量要求。     

小孔等离子体运动实验方法

在间接驱动惯性约束聚变的黑腔中,辐射烧蚀的高Z等离子体的流体力学运动过程对激光注入黑腔的效率、辐射场均匀性和通过诊断口的黑腔辐射温度诊断都有显著影响。为研究诊断口在黑腔辐射场中的等离子体缩口过程,用激光产生X光辐射加热低Z泡沫填充的金黑腔诊断口,以激光辐照钛平面靶产生的2～5 keV高能段窄能区X光作为背光源,用X光分幅相机获得了源靶和小孔靶两种靶型的小孔等离子体运动过程图像,研究了X光烧蚀的小孔等离子体的流体力学运动过程,探索了定量测量小孔等离子体面密度的空间分布与时间演化过程的实验诊断方法,初步给出小孔等离子体的面密度。     

Spatially Inhomogeneous Gain Modification in Photonic Crystals

The electric and magnetic energy distributions in photonic crystals （PC） are calculated by using the plane wave expansion （PWE） method. Even though the total electric and magnetic energy in each unit cell of photonic crystals are equal to each other, the ratio of electric and magnetic energy densities varies depending on the local position. Based on Fermi＇s golden rule, the optical gain is analysed in the full quantum framework that takes the nonuniform energy density ratio into account. This nonuniform energy density ratio in photonic crystals, defined in an equal form as gain modification factor, leads to spatially inhomogeneous modification of optical gain. Results reported in the paper provide a new perspective for analysing gain characteristics, as well as the lasing properties, in photonic crystals.     

Investigation of Impurity Ion Transport with Laser Blow-off in HL-2A Tokamak

Non-recycling impurities are injected into ohmic HL-2A plasma for the first time. The impurities of titanium and aluminium are injected in the discharges with varying plasma density and current. The convection and diffusion process of the injected impurity ions during the inward phase are qualitatively investigated. The results show that the transport of impurities is much slower in the central region of the plasma than outside of it and that it is greatly enhanced during sawtooth crashes.     

太阳光对液晶显示器件光学特性的影响

太阳光对液晶显示器件的影响主要表现在它对其液晶显示器件光稳定性和寿命的影响,从而引起液晶显示器件的迅速老化。通过用分光光度计测量经过不同时间太阳光辐照后液晶显示器件的光谱特性,研究长时间阳光辐照对液晶显示器件的光学性能的影响,分析其光学性能的变化。结果表明, B组普通计算器液晶显示器和C组电话液晶显示器两组液晶片的光学特性类似,品质较好;而A组台式计算器液晶显示器液晶片的老化问题明显比B, C两组严重,品质较差。液晶显示器件长时间受阳光辐照,液晶结构会相应发生变化,光学性能也发生相应变化,表现为液晶表面变黄发黑,其光谱透射特性明显下降。这与液晶材料及制作工艺有关。     

液晶光阀的电光色散特性研究

分析液晶光阀(LCLV)的电光色散特性,重点研究扭曲向列型液晶光阀TB3639的电光色散特性。在温度为27 ℃时, 将TB3639液晶光阀置于频率为1 000 Hz的交流电场中,测出电光特性T-λ曲线,同时得到不同波长的T-V电光特性曲线,确定对比度与光波波长的函数关系k(λ),并得出电光色散特性关系曲线k(λ)～λ。分析结果表明, TB3639液晶光阀在可见光区域,具有相对较高的对比度,其色散较小。波长在450～750 nm区域其对比度均大于0.8;其中波长在550～670 nm区域其对比度变化不大,均大于0.95,其色散最小。     

Ⅴ型三能级原子与双模奇偶纠缠相干光场相互作用系统的光子统计性质

本文采用求解Schroedinger方程和数值计算方法，研究了Ⅴ-型三能级原子与双模奇偶纠缠相干光场相互作用系统的光子统计性质，结果表明：此性质与双模奇偶纠缠相干光场的纠缠程度、失谐量、原子的初态以及双模光的平均光子数相关联．     

Fuzzy Impulsive Control of Permanent Magnet Synchronous Motors

The permanent magnet synchronous motors （PMSMs） may experience chaotic behaviours with systemic parameters falling into a certain area or under certain working conditions, which threaten the secure and stable operation of motor-driven. Hence, it is important to study the methods of controlling or suppressing chaos in PMSMs. In this work, the Takagi-Sugeno （T-S） fuzzy impulsive control model for PMSMs is established via the T-S modelling methodology and impulsive technology. Based on the new model, the control conditions of asymptotieal stability and exponential stability for PMSMs have been derived by the Lyapunov method. Finaily, an illustrated example is also given to show the effectiveness of the obtained results.     

Design of Broadband Single Fundamental Mode Hollow Core Bragg Fibre

The condition of the single fundamental mode （HE11） transmission in hollow core Bragg fibres is investigated theoretically by the transfer matrix method. The influences of core size and cladding parameters on the single HE11 mode bandwidth are analysed, showing that the maximal bandwidth is more sensitive to the core size than the cladding. The numerical results show that sufficiently broad bandwidth of single HE11 mode transmission can be achieved by proper fibre design. A simple and fast method based on improved hollow metal waveguide model is proposed to optimize fibre structure parameters for the maximal single HE11 mode bandwidth.