光纤热极化过程的实时测试研究

通过热极化可以使中心对称的熔石英光纤中产生二阶非线性效应和线性电光效应。为了解各热极化过程参量对热极化产生的线性电光效应的影响,利用全保偏光纤马赫一曾德尔干涉仪构造了一套光纤热极化的实时线性电光效应测试系统,并利用其进行了光纤热极化全过程的监控测试。在线测试了热极化过程的一些参量,例如极化电压、极化时间、以及极化温度等对热极化光纤中产生的线性电光效应的影响。实时测试研究表明,在光纤中施加尽可能高的极化电场将可能在光纤中产生较高的线性电光效应。对侧边抛磨光纤结构的热极化器件,考虑到器件的抗强电场击穿能力,可选用3．o～4．0kV左右的极化直流电压。当施加3．0kV左右的极化电压时,热极化优化时间约为16min,最佳热极化加热温度约为190℃。     

Attractive target wave patterns in complex networks consisting of excitable nodes

This review describes the investigations of oscillatory complex networks consisting of excitable nodes,focusing on the target wave patterns or say the target wave attractors.A method of dominant phase advanced driving(DPAD) is introduced to reveal the dynamic structures in the networks supporting oscillations,such as the oscillation sources and the main excitation propagation paths from the sources to the whole networks.The target center nodes and their drivers are regarded as the key nodes which can completely determine the corresponding target wave patterns.Therefore,the center(say node A) and its driver(say node B) of a target wave can be used as a label,(A,B),of the given target pattern.The label can give a clue to conveniently retrieve,suppress,and control the target waves.Statistical investigations,both theoretically from the label analysis and numerically from direct simulations of network dynamics,show that there exist huge numbers of target wave attractors in excitable complex networks if the system size is large,and all these attractors can be labeled and easily controlled based on the information given by the labels.The possible applications of the physical ideas and the mathematical methods about multiplicity and labelability of attractors to memory problems of neural networks are briefly discussed.     

HCCB-DEMO氦冷固态包层热工水力计算及分析

根据这几年HCCB-DEMO包层技术的发展,对原氦冷固态氚增殖包层进行相应设计改进。利用三维有限元软件CFX对该改进设计进行了热工水力学计算及分析。分析模型包括：第一壁,增殖单元,筋板以及三者集成模型。结果表明：各子部件在单独分析的情况下,材料最高温度低于设计要求限值;冷却剂进出口温度为300/500°C,满足设计需求。同时对比分析了集成计算及单独计算的结果,得出第一壁与铍球床之间的相互热作用较大,铍球床材料最大温度会高于设计限值。针对经集成计算后发现的问题,未来将对氦冷固态包层的设计进行进一步的优化。     

Network dynamics and its relationships to topology and coupling structure in excitable complex networks

All dynamic complex networks have two important aspects, pattern dynamics and network topology. Discovering different types of pattern dynamics and exploring how these dynamics depend or/network topologies are tasks of both great theoretical importance and broad practical significance. In this paper we study the oscillatory behaviors of excitable complex networks （ECNs） and find some interesting dynamic behaviors of ECNs in oscillatory probability, the multiplicity of oscillatory attractors, period distribution, and different types of oscillatory patterns （e.g., periodic, quasiperiodic, and chaotic）. In these aspects, we further explore strikingly sharp differences among network dynamics induced by different topologies （random or scale-free topologies） and different interaction structures （symmetric or asymmetric couplings）. The mechanisms behind these differences are explained physically.     

基于光谱响应差异的HJ-1B热红外通道星上定标系数验证

HJ-1B卫星热红外通道自发射以来共进行了7次星上黑体定标,然而针对星上定标系数的验证工作开展较少。通过半高宽法、矩方法和查找表法计算得到2009年9月14日星上定标系数。以具有较高定标精度的MODIS为参考源,基于MODIS第31,32通道和HJ-1B热红外通道的光谱响应特性,改进对应热红外通道的光谱匹配算法,建立两传感器表观辐亮度的匹配关系,进而通过Planck公式计算出HJ-1B热红外通道的等效水表亮温,通过与HJ-1B热红外通道基于星上定标系数得到的反演水表亮温进行比较,实现对星上定标系数的验证。以光谱响应差异计算的等效亮温值为285.97 K,半高宽法、矩方法和查找表法星上定标系数反演亮温值分别为288.77,274.52和285.97 K。结果显示,半高宽法、矩方法和查找表法星上定标系数反演亮温与光谱响应差异计算的等效亮温偏差分别为2.8,-11.46和0.02 K。结果表明,HJ-1B热红外通道星上定标方法中以查找表法星上定标系数计算结果精度较高。同时证明了基于光谱响应差异的HJ-1B热红外通道星上定标系数验证方法有效可行。     

如何认识恒定电场以及恒定电流的能量传输

讨论了电荷定向移动的图景及整个电路的能量传输的图景．     

纳米晶磁芯恒定磁化速率磁性能参数

设计加工了一套可用于测量环形磁芯在8～12 T/s恒定磁化速率下脉冲性能的实验平台,该实验装置主要包括脉冲形成网络、放电开关、匹配负载及被测磁芯。基于该平台对国产的铁基纳米晶磁芯的磁化曲线进行了测试,得到了铁基纳米晶磁芯在200～300 ns范围内的损耗和非饱和脉冲导磁率。实验结果表明:铁基纳米晶磁芯的相对脉冲导磁率随着磁感应增量增大及工作脉宽减小而减小,磁芯损耗则逐渐增大。     

混合制冷剂循环膨胀机内复叠天然气液化流程设计

提出一种混合制冷剂循环膨胀机内复叠天然气液化流程(Hybrid JT-exp)。采用自主开发的流程模拟程序,分别对C3/MRC流程、AP-XTM流程和Hybrid JT-exp流程进行了模拟,并以单位能耗为指标对三种流程进行了优化。优化结果发现,Hybrid JT-exp流程综合特性曲线匹配效果最好,其流程总功耗和单位能耗与AP-XTM流程相当;与C3/MRC流程相比,其流程总功耗降低约9.5%,单位能耗降低约9.6%。Hybrid JT-exp流程可作为AP-XTM流程的一种替代技术方案。     

A scanning superconducting quantum interference device microscope for room temperature samples

We have constructed a scanning low-T_c superconducting quantum interference device (SQUID) microscope, in which the SQUID is mounted on the lower end of a copper rod and cooled to liquid helium temperature. There is a 65μm thick sapphire window under the SQUID. The sample at room temperature underneath the window can be scanned to produce magnetic images. The microscope has a spatial resolution of 100－150μm and a magnetic field sensitivity of 3－60pT/$\sqrt{Hz}$ in a magnetically unshielded environment. We have used this scanning SQUID microscope to measure various room temperature samples.     

美国加州、香港和大陆高中物理课程理念比较

介绍了美国加州、香港和大陆三地高中物理课程标准的课程理念,理念的关键词的频数分析表明各地的侧重点也各有差异.