An All-Thin-Film Electrochromic Device Composed of MoO3--LiBSO--NiOx Multilayer Structure

An all-thin-tilm （ATF） electrochromic device for modulating the optical transmittance is manufactured using magnetron sputtering. The devices consists of MoO3 as the main electrochromic layer, LiBO2 ＋Li2SO4 （LiBSO） as the ion conductor layer, and NiOx as the complementary electrochromic layer. Glass covered with indium tin oxide （ITO） is used as the substrate and the ITO film is used as the bottom electrode. The ITO film deposited on the top of the devices is used as the other electrode. The structure and morphology of the films are characterized by x-ray diffraction （XRD） and scanning electron microscopy （SEM）. The devices exhibit good optical properties with low transmittance values in the coloured state, and the optical modulation is measured by spectrophotometer in the wavelength range from 400 to 800nm. The average visible light transmittance reaches 50.2% and 3.7% in bleached and coloured state, respectively. The results indicate that such a monolithic system has great potential to be applied in smart windows.     

高效强流径向分离腔振荡器研究

根据同轴虚阴极的结构特点,提出了一种紧凑型径向分离腔振荡器,该径向分离腔的特点是输入电子束的电流可以很大,从而可以得到较高的微波输出功率. 综合考虑影响微波输出的各种因素,在电子束为410kV,电流为35kA的条件下,模拟得到的平均功率大于50GW,频率为146GHz,电子束功率效率达到348%. 关键词： 径向分离腔 高功率微波 同轴虚阴极 电子束分布     

粗骨料取代下的高性能再生混凝土率敏性研究

采用分离式霍普金森压杆(SHPB)试验方法对粗骨料取代率为0%、30%、50%和100%的再生混凝土进行冲击试验,研究了应力-应变关系曲线、动态抗压强度、动态弹性模量以及破坏形态受应变率影响的变化规律。试验表明,应力-应变关系曲线开始段呈线性关系,随应变率的增大,线性段斜率增大,持续范围扩大,峰值应力变大;峰值应力具有率敏性,随应变率增大,峰值应力不断增加,取代率对峰值应力的影响差别不明显;动态弹性模量也具有率敏性,呈正相关关系,取代率不同,其率敏性程度有所差异;随着应变率增大,试件破坏程度随之加剧,从完整无裂缝到瞬间崩裂成碎块。     

三腔渡越管振荡器高频结构的解析研究

 从圆柱坐标系下Borgnis位函数的齐次标量Helmholtz方程出发,引入慢波驻波概念及其场表达式,利用Borgnis位函数的边界条件及相邻子区公共界面上的场匹配条件,导出了三腔渡越管振荡器内角向均匀TM模的色散关系及场分布的解析表达式。运用该解析法求得三腔渡越管振荡器的谐振频率与实验中测得的微波频率一致,求得的场分布与数值法得到的场分布十分吻合。     

ON THE EXISTENCE AND STABILITY OF SOLUTION FOR SEMI－HOMOGENEOUS BOUNDARY VALUE PROBLEM

ＯＮＴＨＥＥＸＩＳＴＥＮＣＥＡＮＤＳＴＡＢＩＬＩＴＹＯＦＳＯＬＵＴＩＯＮＦＯＲＳＥＭＩ－ＨＯＭＯＧＥＮＥＯＵＳＢＯＵＮＤＡＲＹＶＡＬＵＥＰＲＯＢＬＥＭＤｏｎｇＱｉｎｘｉ（董勤喜）;ＨｕａｎｇＸｉａｎｋａｉ（黄先开）（ＲｅｃｅｉｖｅｄＪｕｌｙ．４．１９...     

PULSED LASER DEPOSITION AND CHARACTERIZATION OF FERHOELECTHIC Pb(Zr,Ti)O3 THIN FILMS ON SILICON-ON-INSULATOR SUBSTRATES

Ferroelectric Pb(Zr, Ti)O₃ thin films were prepared by pulsed exeimer laser deposition on silicon-on-insulator and Pt-coated silicon-on-insulator substrates, and rapid thermal annealing was per-formed to crystallize the films, Based on the analysis by X-ray diffraction, Rutherford backscattering spectroscopy and measurements of electrical properties, the films were revealed to be polycrystalline perovskite structure with mainly (100) and (110) orientations, and their crystallization was found to be dependent on annealing temperature and annealing time. The films show good ferroelectricity, with P_r=15μC/cm², E_c= 50kV/cm, high resistivity and high dielectric constant.     

非晶(Fe0.99Mo0.01)78Si9B13,Fe78Si9B13合金激波晶化主相α-Fe变化研究

研究激波对非晶FeBSi,FeMoBSi合金的影响,经X射线衍射分析,测定主晶化相α-Fe(Mo,B,Si)晶格常量.结果表明：晶格常量比正常值偏小,用双势模型计算晶格常量,理论值与实验符合得很好.从而肯定晶格常量变小是形成B的替代式固溶体和缺位式固溶体所致. 关键词：     

Fe73.5Cu1Nb3B9Si13.5非晶态合金的激波纳米晶化研究

实验表明,非晶态合金在激波影响下会转变为纳米晶.最近的实验进一步发现,Fe_73.5Cu₁Nb₃B₉Si_13.5非晶态合金中的Cu,Nb在激波晶化中的细化作用被抑制,且样品在这种转变之后作进一步的退火处理,其晶粒度变大而晶格常数变小.在激波晶化机理分析中提出了“激波流体晶化”构想. 关键词：     

非晶、纳米晶材料的历史与现状

 一、非晶金属的发现人类使用了八千多年的金属(从青铜开始)且一直都是多晶态金属,1934年,克拉默在真空中把金属蒸发到冷基底(玻璃)上,经X射线测定,发现这种金属膜中原子的周期性消失了,这是人们第一次发现非晶金属.此后不久,布伦纳(1937)用电解沉积法得到了Ni-P非晶合金.     

长周期光纤光栅温度和应力传感特性研究

本文报道了长周期光纤光栅(LPG)温度和应力传感特性的实验研究结果,测得LPG的温度和应力灵敏系数均高于光纤布喇格光栅(FBG)灵敏系数的典型值,在11～80℃和0～100gf的温度和应力测量范围内,温度和应力响应曲线具有较好的线性.基于同一LPG不同透射波长具有不同温度和应力灵敏度的特性,实现了温度和应力的单光栅同时测量.