一种计算水溶解度的经验加合模型的适用范围与局限

我们发展了一种用于预测有机小分子化合物水溶解度(logS)的经验方法XLOGS. 它本质上是一种加合模型, 采用83种原子/基团类型和3个校正因子作为模型的描述符.该方法还可以根据一个合适的参照分子的logS实验值来计算未知化合物的logS值. 我们将XLOGS模型在由4171个化合物组成的训练集上进行了参数化, 多元线性回归获得的相关系数R²和标准偏差SD分别为0.82和0.96单位. 将该训练集进一步分为仅含液体化合物和仅含固体化合物的两个子集. XLOGS模型在这两个子集上的回归结果显示前者优于后者(标准偏差分别为0.65单位和0.94单位). 还利用log1/S和logP(脂水分配系数)之间的差值来研究XLOGS方法在液体和固体化合物数据集上的表现. 研究结果表明: XLOGS等加合法模型更适合应用于这两者差值接近于0的化合物. 我们还将XLOGS和其他三种流行的logS计算模型(包括Qikprop, MOE-logS和ALOGPS)在一个含有132个类药化合物的独立测试集上进行了比较. 总体而言, 我们的研究结果为加合法模型在水溶解度预测方面的合理应用提供了指导.     

介孔氧化铝负载Ni-Co氧化物催化剂上丙烷氧化脱氢制丙烯

以非离子型三嵌段共聚物作为模板剂, 异丙醇铝为氧化铝的前驱物, 采用一锅法合成了一系列介孔氧化铝负载镍氧化物、钴氧化物以及镍-钴双金属氧化物催化剂, 并以介孔氧化铝为载体, 采用浸渍法制备了负载Ni-Co 氧化物催化剂. 采用N₂吸附-脱附、高分辨透射电镜(HRTEM)、X射线粉末衍射(XRD)、H₂程序升温还原(H₂-TPR)以及激光拉曼光谱(LRS)等技术对催化剂的结构与性质进行表征, 并考察了催化剂的丙烷氧化脱氢反应性能. 结果表明: 一锅法制备的各催化剂均有大的比表面积和规整的孔道结构, 且负载的金属氧化物高度分散; 而浸渍法制备的催化剂, 其载体的介孔结构被破坏并有Co₃O₄晶相生成. 在考察的催化剂中, 一锅法合成的介孔氧化铝负载Ni-Co 氧化物催化剂表现出最佳的丙烷氧化脱氢性能. 在450 °C、C₃H₈:O₂:N₂的摩尔比为1:1:4和空速(GHSV)为10000 mL·g^-1·h^-1条件下, 该催化剂上丙烯产率为10.3%, 远高于浸渍法制备的催化剂上所获得的丙烯产率(2.4%). 关联催化剂表征和反应结果, 讨论了催化剂结构与性能之间的关系.     

取代基对1-甲基尿嘧啶与N-甲基乙酰胺氢键复合物中氢键强度的影响

使用密度泛函理论B3LYP方法和二阶微扰理论MP2方法对由1-甲基尿嘧啶与N-甲基乙酰胺所形成的氢键复合物中的氢键强度进行了理论研究, 探讨了不同取代基取代氢键受体分子1-甲基尿嘧啶中的氢原子对氢键强度的影响和氢键的协同性. 研究表明: 供电子取代基使N－H…O＝C氢键键长r(H…O)缩短, 氢键强度增强; 吸电子取代基使N－H…O＝C氢键键长r(H…O)伸长, 氢键强度减弱. 自然键轨道(NBO)分析表明: 供电子基团使参与形成氢键的氢原子的正电荷增加, 使氧原子的负电荷增加, 使质子供体和受体分子间的电荷转移量增多; 吸电子基团则相反. 供电子基团使N－H…O＝C氢键中氧原子的孤对电子轨道n(O)对N－H的反键轨道σ^*(N－H)的二阶相互作用稳定化能增强, 吸电子基团使这种二阶相互作用稳定化能减弱. 取代基对与其相近的N－H…O＝C氢键影响更大.     

Li3V2(PO4)3/C的P123辅助流变相法制备及电化学性能

以V₂O₅、NH₄H₂PO₄、LiOH、柠檬酸、三嵌段聚合物表面活性剂P123为原料, 用流变相(RPR)法制备了Li₃V₂(PO₄)₃/C正极材料. 用X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等方法表征, 结果表明: 材料为单一纯相的单斜晶体结构, 颗粒均匀并呈现珊瑚结构; 恒流充放电, 循环伏安(CV)及电化学交流阻抗(EIS)等电化学性能测试表明, 采用P123 辅助合成材料电化学性能明显优于未采用P123 辅助合成材料. 3.0-4.3 V放电区间, 0.1C充放电下P123 辅助合成Li₃V₂(PO₄)₃/C材料首次放电比容量为129.8 mAh·g^-1, 经过50 次循环后容量只衰减0.9%; 倍率性能及循环性能优异, 1C、10C、25C的首次放电比容量分别为128.2、121.3、109.1 mAh·g^-1, 50次循环后容量保持率分别为99.1%, 96.9%, 90.7%. 这归因于三嵌段聚合物P123 作为分散剂的同时也作为有机碳源在颗粒表面及间隙形成碳网络, 有利于材料导电率的改善, 降低了其电荷转移阻抗, 减小了电极充放电过程的极化现象.     

溶液稳定、高导电性波纹状石墨烯片

特殊的单原子层二维sp²碳结构给石墨烯带来众多独特的性能和潜在的应用. 然而, 单层石墨烯容易聚集并会逐渐重新石墨化, 这成为其应用的一个重要障碍. 本文报道了一种新策略来解决这个问题, 即通过在石墨烯表面引入sp²碳纳米结构作为永久的波纹来阻止石墨烯的聚集和石墨化, 并使之在溶液中易于分散和稳定. 和其他功能化方法不同, 该方法没有引入杂原子, 不破坏石墨烯的结构和功能. 制得的石墨烯具有优异的导电性能(~65000 S·m^-1), 并具有较好的溶液稳定性.     

Novel Silicon Nanotubes

The preparation of silicon nanotubes is a subject of great importance for both the theoretical and experimental work in the nanotube research field since it could lead to a wealth of new physics and chemistry because of the unique properties of silicon as compared with its carbon analogue. Some structures of nanoscale silicon and silicon composites, such as silicon nanowire1, silicon nano-clusters2 and SiC nanorods3 have been discovered and investigated. The silicon nanotubes, however, have …     

A Novel Hexanordammarane Glycoside from the Roots of Panax notoginseng

There are extensive chemical studies on the roots of Panax notoginseng (Burk.) F. H. Chen, a famous traditional Chinese medicine called San-Qi or Tian-Qi, thirty-three dammarane saponins were isolated and their structures were identified by our group and other scientists1-8. Further chemical investigation on this plant led to the isolation of a novel hexanordammarane glycoside, named notoginsenoside R10 (1).Notoginsenoside R10 (1), white powder, negative HRFAB-MS showed a quasimolecular…     

The Reaction of CH_3+NO in Gaseous Phase

NOx is a major pollutant product from combustion processes. In hydrocarbon combustion there are a number of radicals as CH2, C2H, CH3 and C2H3 can react with NO1-3. A large amount of CH3 exists in natural gas combustion flame. Therefore the reaction of CH3 with NO is very important. A rate constant (k =1.510-11exp(-60k/T) cm3molecule-1s-1) of the overall CH3+NO reaction was measured with laser flash photolysis/absorption spectroscopy over the temperature range 296-509 K and at pre…     

Determination the Hydrogen Stored in Carbon Nanotubes by NO Titration Method

With the diminution of fossil fuel resources and the increase in pollution, energy and environment have become a public concern. Mankind is in need of a new but clean energy resource. The use of hydrogen appears to be the answer. One of the technical challenges in hydrogen utilization is H2-storage. At present, materials for storing hydrogen are alloys such as LaNi5 and FeTi; the storage capacity is around 1.4 wt%, too low for practical application. Another problem with these alloys is…     

Asymmetric Addition of Diethylzinc to Aldehydes Catalyzed by Chiral γ_Amino Alcohols

Although the asymmetric additions of diethylzinc to aldehydes have been extensively studied in the presence of chiral catalyst, most of the chiral ligands tested are b-amino alcohols1. In this report, the synthesis of chiral gamino alcohols 1-4 from the reaction of (+)-camphor and (-)-menthone with 2-lithiomethyl-6-methyl-pyridine or 2-picolly- lithium2, which give a single diasteromer as determined by 1H NMR with high yields (Scheme 1)3, and their application in the enantioselective additio…