HCCB-DEMO氦冷固态包层热工水力计算及分析

根据这几年HCCB-DEMO包层技术的发展,对原氦冷固态氚增殖包层进行相应设计改进。利用三维有限元软件CFX对该改进设计进行了热工水力学计算及分析。分析模型包括：第一壁,增殖单元,筋板以及三者集成模型。结果表明：各子部件在单独分析的情况下,材料最高温度低于设计要求限值;冷却剂进出口温度为300/500°C,满足设计需求。同时对比分析了集成计算及单独计算的结果,得出第一壁与铍球床之间的相互热作用较大,铍球床材料最大温度会高于设计限值。针对经集成计算后发现的问题,未来将对氦冷固态包层的设计进行进一步的优化。     

Network dynamics and its relationships to topology and coupling structure in excitable complex networks

All dynamic complex networks have two important aspects, pattern dynamics and network topology. Discovering different types of pattern dynamics and exploring how these dynamics depend or/network topologies are tasks of both great theoretical importance and broad practical significance. In this paper we study the oscillatory behaviors of excitable complex networks （ECNs） and find some interesting dynamic behaviors of ECNs in oscillatory probability, the multiplicity of oscillatory attractors, period distribution, and different types of oscillatory patterns （e.g., periodic, quasiperiodic, and chaotic）. In these aspects, we further explore strikingly sharp differences among network dynamics induced by different topologies （random or scale-free topologies） and different interaction structures （symmetric or asymmetric couplings）. The mechanisms behind these differences are explained physically.     

基于光谱响应差异的HJ-1B热红外通道星上定标系数验证

HJ-1B卫星热红外通道自发射以来共进行了7次星上黑体定标,然而针对星上定标系数的验证工作开展较少。通过半高宽法、矩方法和查找表法计算得到2009年9月14日星上定标系数。以具有较高定标精度的MODIS为参考源,基于MODIS第31,32通道和HJ-1B热红外通道的光谱响应特性,改进对应热红外通道的光谱匹配算法,建立两传感器表观辐亮度的匹配关系,进而通过Planck公式计算出HJ-1B热红外通道的等效水表亮温,通过与HJ-1B热红外通道基于星上定标系数得到的反演水表亮温进行比较,实现对星上定标系数的验证。以光谱响应差异计算的等效亮温值为285.97 K,半高宽法、矩方法和查找表法星上定标系数反演亮温值分别为288.77,274.52和285.97 K。结果显示,半高宽法、矩方法和查找表法星上定标系数反演亮温与光谱响应差异计算的等效亮温偏差分别为2.8,-11.46和0.02 K。结果表明,HJ-1B热红外通道星上定标方法中以查找表法星上定标系数计算结果精度较高。同时证明了基于光谱响应差异的HJ-1B热红外通道星上定标系数验证方法有效可行。     

如何认识恒定电场以及恒定电流的能量传输

讨论了电荷定向移动的图景及整个电路的能量传输的图景．     

纳米晶磁芯恒定磁化速率磁性能参数

设计加工了一套可用于测量环形磁芯在8～12 T/s恒定磁化速率下脉冲性能的实验平台,该实验装置主要包括脉冲形成网络、放电开关、匹配负载及被测磁芯。基于该平台对国产的铁基纳米晶磁芯的磁化曲线进行了测试,得到了铁基纳米晶磁芯在200～300 ns范围内的损耗和非饱和脉冲导磁率。实验结果表明:铁基纳米晶磁芯的相对脉冲导磁率随着磁感应增量增大及工作脉宽减小而减小,磁芯损耗则逐渐增大。     

A scanning superconducting quantum interference device microscope for room temperature samples

We have constructed a scanning low-T_c superconducting quantum interference device (SQUID) microscope, in which the SQUID is mounted on the lower end of a copper rod and cooled to liquid helium temperature. There is a 65μm thick sapphire window under the SQUID. The sample at room temperature underneath the window can be scanned to produce magnetic images. The microscope has a spatial resolution of 100－150μm and a magnetic field sensitivity of 3－60pT/$\sqrt{Hz}$ in a magnetically unshielded environment. We have used this scanning SQUID microscope to measure various room temperature samples.     

美国加州、香港和大陆高中物理课程理念比较

介绍了美国加州、香港和大陆三地高中物理课程标准的课程理念,理念的关键词的频数分析表明各地的侧重点也各有差异.     

Conceptual design of Hefei advanced light source

The conceptual of Hefei Advanced Light Source, which is an advanced VUV and Soft X-ray source, was developed at NSRL of USTC. According to the synchrotron radiation user requirements and the trends of SR source development, some accelerator-based schemes were considered and compared; furthermore storage ring with ultra low emittance was adopted as the baseline scheme of HALS. To achieve ultra low emittance, some focusing structures were studied and optimized in the lattice design. Compromising of emittance, on-momentum and off-momentum dynamic aperture and ring scale, five bend acromat (FBA) was employed. In the preliminary design of HALS, the emittance was reduced to sub nm·rad, thus the radiation up to water window has full lateral coherence. The brilliance of undulator radiation covering several eVs to keVs range is higher than that of HLS by several orders. The HALS should be one of the most advanced synchrotron radiation light sources in the world.     

同步辐射真空紫外光电离质谱研究乙烯扩散火焰

本文利用探针取样法结合同步辐射真空紫外光电离和分子束质谱技术研究了常压下的乙烯扩散火焰.通过测量光电离质谱和光电离效率谱分辨了该火焰中大部分的燃烧中间体及产物;通过改变探针取样位置以及半定量计算得到了其中部分燃烧中间体及产物的摩尔分数曲线.实验结果为探索多环芳烃和烟尘在扩散火焰中形成的最初阶段的反应机理提供了依据.     

Micro-fabrication process of vapor cells for chip-scale atomic clocks

As the key part of chip-scale atomic clocks(CSACs), the vapor cell directly determines the volume, stability,and power consumption of the CSAC. The reduction of the power consumption and CSAC volumes demands the manufacture of corresponding vapor cells. This overview presents the research development of vapor cells of the past few years and analyzes the shortages of the current preparation technology. By comparing several different vapor cell preparation methods, we successfully realized the micro-fabrication of vapor cells using anodic bonding and deep silicon etching. This cell fabrication method is simple and effective in avoiding weak bonding strengths caused by alkali metal volatilization during anodic bonding under high temperatures.Finally, the vapor cell D2 line was characterized via optical-absorption resonance. According to the results,the proposed method is suitable for CSAC.