光源稳定性对简并四波混频信噪比影响的实验研究

在碘蒸气中研究了染料激光稳定性对简并四波混频(DFWM)信噪比的影响。实验中采用多模Nd∶YAG激光器倍频的输出泵浦染料激光器(染料PM580溶于酒精)。在具有前向补偿分光系统和图像探测系统的帮助下,在常温常压条件下测得泵浦光在波长为554.013 nm时达到饱和光强为290 μJ。同时发现染料激光器的光稳定性(输出波长范围,光束质量和能量转换效率等)随使用时间,泵浦激光脉冲次数和能量的增加而逐渐减弱。另外通过对比发现在染料激光器输出不稳定时,光源单色性和指向性等指标的变化导致在同一泵浦强度不同时刻获得的DFWM信号强度相差很大,且DFWM信号信噪比低。染料激光器光源稳定性对DFWM信号影响的研究结果对物质的痕迹量探测以及无荧光物质光谱定标等方面的应用具有重要意义。     

高斯光束斜入射法布里-珀罗干涉腔后的反射光强分布

基于多光束干涉原理,推导了高斯光束斜入射法布里-珀罗干涉仪后的反射光强表达式.在此基础之上数值研究了入射角对高斯光束的反射特性的影响.研究结果表明:当法布里-珀罗干涉腔的腔长满足反共振时,随着入射角的增大,反射光的光强分散,峰值强度下降后呈现出幅度衰减的波动;峰值位置随着入射角的增大,呈现出幅度越来越小的振荡偏移;光斑大小随入射角的增大,呈现出幅度减小的振荡.     

ADSORPTION BEHAVIOR OF AMINO ACIDS ON COPPER SURFACES

The major results of a series of our recent investigations on the adsorption of eight amino acids on Cu(001) and (111) surfaces are reviewed in the present paper. In all studied cases the molecules adsorb onto the surface in their anionic form. With the increase of the coverage three different 2D phases of the adsorbates, that is, the 2D lattice gas, intermediate, and solid phases, appear sequentially, although for few systems one or two of them do not appear. In both the 2D lattice gas and intermediate phases the molecules "stand" with their two oxygen "feet" on the surface and the intermolecular interactions are repulsive, although in the former they can diffuse frequently whereas in the latter they are discommensurate in one direction with the substrate. In the solid phase the molecules "lie" down on the surface to form commensurate superstructures. Adsorption of amino acids may often induce step faceting as well as bunching to form facets. Adsorption of L-lysine on Cu(001) may cause steps bunching to form facets with all the same chirality. Our preliminary results show that it is possible to manipulate individual molecules with the STM tip even at room temperature. These results may have applications in nano-materials, nano-technology, and very likely also in chiral separations or enantioselective heterogeneous catalysis.     

不锈钢材料及TiN镀膜处理后PSD测试实验研究

PSD性能是评价电子储存环真空室材料及材料表面处理优劣的一个重要指标.对一约1.5m长不锈钢管道真空室进行了镀TiN薄膜处理,并在合肥光源机器研究用光束线(MSB)的PSD实验站上对该真空室在镀TiN薄膜处理前后分别进行了PSD性能测试实验研究.测试研究结果表明,TiN薄膜处理对于减小不锈钢材料PSD有非常明显的作用.     

基于实时内核的双起升双吊具桥吊实时仿真平台

双起升双吊具桥吊是一种复杂的多电机传动机械,其多电机协调控制需要实现桥吊操作的准确性、安全性和快速性;文中针对一种双起升双吊具桥吊实验装置的多电机协调控制的需要,构建了一个桥吊多电机实时仿真控制平台,提出了一种基于Real-TimeWorkshop(RTW)的实时内核的混合仿真实验构架,采用了S函数设计开发运动控制器驱动模块,并通过调用设备驱动函数操作运动控制器,最终实现桥吊多电机协调控制的方法;该方案具有技术先进、结构简单、使用灵活、成本低廉的特点,能够方便地实现针对双起升双吊具桥吊控制方法的数字仿真和半实物仿真。     

Tunable Ba0.5Sr0.5TiO3 film bulk acoustic resonators using SiO2/Mo Bragg reflectors

Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators（FBARs） based on SiO 2 /Mo Bragg reflectors are explored,which can withstand high temperature for the deposition of Ba x Sr 1 x TiO 3（BST） films at 800 C.The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect.The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing,while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias（ 45 V） while downwards at higher dc bias.The calculated relative tunability of shifts at series resonance frequency is around 2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias,which can be comparable to AlN FBARs.This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum（Mo） as the high acoustic impedance layer in a Bragg reflector,which not only provides excellent acoustic isolation from the substrate,but also improves the crystallinity of BST films withstanding higher deposition temperature.     

STABILITY OF BRIGHT SCREENING-PHOTOVOLTAIC SPATIAL SOLITONS

We present a theoretical analysis of the stability of screening-photovoltaic (SP) spatial solitons in biased photovoltaic-photorefractive materials in the case of neglecting the loss of the material and the effect of diffusion. When an incident optical beam is a SP soliton, this beam propagates along a linear path with its shape kept unchanged. When the maximum amplitude, width and functional form of an incident optical beam are slightly different from those of a SP soliton, the beam reshapes itself and tries to evolve into a solitary wave after a short distance. That is, these SP solitons are stable against small perturbations. However, optical beams that significantly differ from SP soliton solutions tend to experience larger cycles of compression and expansion, and their maximum amplitudes oscillate with propagation distances. The larger the perturbations, the stronger the oscillation.     

Spin gapless armchair graphene nanoribbons under magnetic field and uniaxial strain

Using Green＇s function method, we investigate the spin transport properties of armchair graphene nanoribbons （AG- NRs） under magnetic field and uniaxial strain. Our results show that it is very difficult to transform narrow AGNRs directly from semiconductor to spin gapless semiconductors （SGS） by applying magnetic fields. However, as a uniaxial strain is exerted on the nanoribbons, the AGNRs can transform to SGS by a small magnetic field. The combination mode be- tween magnetic field and uniaxial strain displays a nonmonotonic arch-pattern relationship. In addition, we find that the combination mode is associated with the widths of nanoribbons, which exhibits group behaviors.     

生物活性复合材料在生物矿化过程中的微观形貌与离子浓度变化

采用3-羟基丁酸酯-3-羟基戊酸酯的共聚物(PHBV)与磷酸三钙(TCP)、羟基磷灰石(HA)、生物活性玻璃(BG)等进行复合,获得了性能优良的生物活性骨组织工程支架材料和骨修复材料.研究和比较了3种复合材料在体外模拟生理环境中发生的生物矿化反应,对比了反应前后因矿化物的形成导致的表面微观形貌的变化,通过检测反应液离子浓度的变化对不同材料的矿化过程和生物活性进行了定量表征.研究结果表明,3种复合材料在模拟生理溶液中发生生物矿化的过程和程度不同,其中PHBV/BG的生物活性反应最为明显.     

辣根过氧化氢酶电极的研究

以辣根过氧化氢酶修饰电极采用循环伏安法对环境污染物对对苯二酚进行了测定 ,对测定条件进行了探索 ,该电极在 p H7,H2 O2 浓度为 1 0μmol· L-1时对苯二酚具有良好的响应 ,其线性范围为 2 .0× 1 0 -5～ 2 .8× 1 0 -3mol·L-1,检测下限为 1 .0× 1 0 -6mol· L-1。电极的峰电流与扫描速度的平方根成正比 ,电极上的传质过程受扩散控制 ,对酶催化反应的动力学机制进行了探讨。