"上火"的机制及奶粉上火的探讨

对“上火”的定义、分类,机理及奶粉的定义、品种进行了分析.通过对清火物质的分析,提出了清火奶粉的清火机制,并对“喝了不上火”的系列奶粉进行了生产工艺及营养学设计的探讨.     

Spontaneous-emission control by local density of states of photonic crystal cavity

The local density of states (LDOS) of two-dimensional square lattice photonic crystal (PhC) defect cavity is studied.The results show that the LDOS in the centre is greatly reduced,while the LDOS at the point off the centre (for example,at the point (0.3a,0.4a),where a is the lattice constant) is extremely enhanced.Further,the disordered radii are introduced to imitate the real devices fabricated in our experiment,and then we study the LDOS of PhC cavity with configurations of different disordered radii.The results show that in the disordered cavity,the LDOS in the centre is still greatly reduced,while the LDOS at the point (0.3a,0.4a) is still extremely enhanced.It shows that the LDOS analysis is useful.When a laser is designed on the basis of the square lattice PhC rod cavity,in order to enhance the spontaneous emission,the active materials should not be inserted in the centre of the cavity,but located at positions off the centre.So LDOS method gives a guide to design the positions of the active materials (quantum dots) in the lasers.     

Magnetic plasmon mode resonance and power transmission in a nanosandwich waveguide

The magnetic plasmon (MP) modes in the metal-dielectric-metal nanosandwich structure are investigated nu-merically,and the principle of energy resonance in such a resonator is proposed.An equivalent inductance capacitance circuit analysis method is proposed and the results are in agreement with the numerical simulations.Based on the MP resonance in such a structure,a nanosandwich chain waveguide is designed.Gold and silver are chosen as the metal materials.The power transmission efficiency of the nanosandwich waveguide can be as high as 0.546 in a specific nanosandwich unit cell,even when the metal absorption loss is large,which is the perspective of the new waveguides and lasers based on MP modes.     

负载CuO的Ti~(3+)/TiO_2催化剂制备及其光催化甲苯降解性能

通过在锐钛矿TiO_2载体表面上负载Cu-BTC(BTC,1,3,5-苯甲酸)前驱体,还原处理制备光催化剂CuO-Ti~(3+)/TiO_2(Cu-TiMB),对其在可见光条件下气相甲苯净化催化性能进行了研究。结果表明,该改良方法制备的CuO-Ti~(3+)/TiO_2(CuTiM B)催化剂的活性是浸渍法所得催化剂CuO-TiO_2(Cu-TiD)的2.68倍。CuO-Ti~(3+)/TiO_2(Cu-TiMB)具有更大的比表面积(147 m2/g)和较小的颗粒粒径(0.45μm),呈现多孔状,CuO的分散度较高;催化剂表面Ti~(3+)提供了大量的氧缺位,在400-800 nm波段的光响应能力显著增强。CuO-Ti~(3+)/TiO_2(Cu-TiMB)催化剂中Cu~(2+)、Cu~+与Ti~(3+)形成的异质结构进一步增多了氧缺位数量,延缓e--h+的复合时间;氧缺陷增强了捕获吸附氧能力,通过金属氧化物价态变化增强化学吸附能力,提高了光催化性能。     

Graded index profiles and loss-induced single-mode characteristics in vertical-cavity surface-emitting lasers with petal-shape holey structure

The 850-nm oxide-confined vertical-cavity surface-emitting lasers with petal-shape holey structures are presented.An area-weighted average refractive index model is given to analyse their effective index profiles,and the graded index distribution in the holey region is demonstrated.The index step between the optical aperture and the holey region is obtained which is related merely to the etching depth.Four types of holey vertical-cavity surface-emitting lasers with different parameters are fabricated as well as the conventional oxide-confined vertical-cavity surface-emitting laser.Compared with the conventional oxide-confined vertical-cavity surface-emitting laser without etched holes,the holey vertical-cavity surface-emitting laser possesses an improved beam quality due to its graded index distribution,but has a lower output power,higher threshold current and lower slope efficiency.With the hole number increased,the holey vertical-cavity surface-emitting laser can realize the single-mode operation throughout the entire current range,and reduces the beam divergence further.The loss mechanism is used to explain the single-mode characteristic,and the reduced beam divergence is attributed to the shallow etching.High coupling efficiency of 86% to a multi-mode fibre is achieved for the single-mode device in the experiment.