A method to extend wavelength into middle-wavelength infrared based on InAsSb/(Al)GaSb interband transition quantum well infrared photodetector

We present a method to extend the operating wavelength of the interband transition quantum well photodetector from an extended short-wavelength infrared region to a middle-wavelength infrared region. In the modified In As Sb quantum well, Ga Sb is replaced with Al Sb/Al Ga Sb, the valence band of the barrier material is lowered, the first restricted energy level is higher than the valence band of the barrier material, the energy band structure forms type-II structure. The photocurrent spectrum manifest that the fabricated photodetector exhibits a response range from 1.9 μm to 3.2 μm with two peaks at 2.18 μm and 3.03 μm at 78 K.     

关于RHEED振荡技术优化GaAs(110)量子阱生长的研究

在GaAs(110)衬底上生长的半导体材料有诸多优良性能，使得在非极性GaAs(110)衬底上获得高质量各类异质结材料，成为近年来分子束外延生长关注的课题.考虑GaAs(110)表面是Ga和As共面，最佳生长温度窗口很小；反射式高能电子衍射的(1×1)再构图案对生长温度和V/Ⅲ束流比不敏感，难于通过观察再构图案的变化，准确地找到最佳生长条件.作者在制备GaAs(110)量子阱过程中，观察到反射式高能电子衍射强度振荡呈现出的单双周期变化.这意味着不同工艺条件下，在 GaAs(110)衬底上量子阱有单层和双层两种生长模式.透射电子显微镜和室温光致荧光光谱测量结果表明：在双层生长模式下量子阱样品光学性能较差，而在单层生长模式下量子阱光学性能较好，但是界面会变粗糙.利用这一特点，我们采用反射式高能电子衍射强度振荡技术，找到了一种在GaAs(110)衬底上生长高质量量子阱的可行方法. 关键词： 反射高能电子衍射 量子阱 分子束外延     

Controlled Growth of Zn-Polar ZnO Films on Al-Terminated α-Al2O3(0001) Surface by Using Wurtzite MgO Buffer

The controlled growth of Zn-polar ZnO fihns on Al-terminated α-Al203 （0001） substrates is investigated by the radio-frequency plasma-assisted molecular beam epitaxy method. Prior to the growth, α-Al2O3 （0001） surface is modified by an ultrathin MgO layer, which serves as a uniform template for epitaxy of Zn-polar ZnO films. The microstructures of ZnO/MgO/Al2O3 interface are investigated by in-situ reflection high-energy electron diffraction observations and ex-situ high-resolution transmission electron microscopy characterization. It is found that under Mg-rich condition, the achievement of the wurtzite MgO ultrathin layer plays a key role in the subsequent growth of Zn-polar ZnO. An interracial atomic model is proposed to explain the mechanism of polarity selection of both MgO and ZnO films.     

Preparation and characterization of room-temperature ferromagnetism GaMnN based on ion implantation

This paper reports the fabrication of GaMnN ferromagnetic semiconductor on GaN substrate by high-dose Mn ion implantation. Both the structural and optical properties for Mn+-implanted GaN material were studied by X-ray diffraction, Raman scattering and photolumi-nescence. The results reveal that the implanted manganese incorporates on Ga site and GaMnN ternary phase is formed in the substrate. The magnetic behavior has been characterized by superconducting quantum interference device. The material shows room-temperature ferromagnet-ism. The temperature-dependent magnetization indicates different mechanism for ferromagnetism in Mn+-implanted GaN.     

氧化锌基材料、异质结构及光电器件

Ⅱ-Ⅵ族直接带隙化合物半导体氧化锌(ZnO)的禁带宽度为3.37 eV,室温下激子束缚能高达60 meV,远高于室温热离化能(26 meV),是制造高效率短波长探测、发光和激光器件的理想材料。历经10年的发展,ZnO基半导体的研究在薄膜生长、杂质调控和器件应用等方面的研究获得了巨大的进展。本文主要介绍了以国家"973"项目(2011CB302000)研究团队为主体,在上述方面所取得的研究进展,同时概述国际相关研究,主要包括衬底级ZnO单晶的生长,ZnO薄膜的同质、异质外延,表面/界面工程,异质结电子输运性质、合金能带工程,p型掺杂薄膜的杂质调控,以及基于上述结果的探测、发光和激光器件等的研究进展。迄今为止,该团队已经实现了薄膜同质外延的二维生长、硅衬底上高质量异质外延、基于MgZnO合金薄膜的日盲紫外探测器、可重复的p型掺杂、可连续工作数十小时的同质结紫外发光管以及模式可控的异质结微纳紫外激光器件等重大成果。本文针对这些研究内容中存在的问题和困难加以剖析并探索新的研究途径,期望能对ZnO材料在未来的实际应用起到一定的促进作用。     

使用SiNx原位淀积方法生长的GaN外延膜中的应力研究

采用低压MOCVD系统,在生长过程中使用SiNx原位淀积的方法产生纳米掩模,并在纳米掩模上进行选区生长和侧向外延制备了GaN外延薄膜.使用拉曼光谱和光荧光的手段对GaN外延膜中的残余应力进行了研究.研究发现,用SiNx原位淀积出纳米掩模后,GaN生长将由二维向三维转变,直到完全合并为止.利用拉曼光谱和光荧光谱分别研究了薄膜中的残余应力,两者符合得很好;这种方法生长出的GaN薄膜的应力分布较传统的侧向外延更加均匀;并且从中发现随着生长过程中SiNx原位淀积时间的增加,生长在其上的GaN外延膜中的残余应力减小.这是因为,随着SiNx原位淀积时间的增加,SiNx纳米掩模的覆盖度也增大.因此侧向外延区的比例增大,残余应力随之减小.     

Electron mobility in the linear region of an AlGaN/AlN/GaN heterostructure field-effect transistor

We simulate the current-voltage （I-V） characteristics of AlGaN/AlN/GaN heterostructure field-effect transistors （HFETs） with different gate lengths using the quasi-two-dimensional （quasi-2D） model. The calculation results obtained using the modified mobility model are found to accord well with the experimental data. By analyzing the variation of the electron mobility for the two-dimensional electron gas （213EG） with the electric field in the linear region of the AlGaN/AlN/GaN HFET I-V output characteristics, it is found that the polarization Coulomb field scattering still plays an important role in the electron mobility of AlGaN/AlN/GaN HFETs at the higher drain voltage and channel electric field. As drain voltage and channel electric field increase, the 2DEG density reduces and the polarization Coulomb field scattering increases, as a result, the 2DEG electron mobility decreases.     

具有两类需求服务的随机库存系统控制策略研究

研究具有两类顾客排队需求服务的随机库存系统.系统采取(s,Q)补货策略且当库存水平下降到安全库存s时,到达的第二类顾客以概率P得到服务.首先,建立库存水平状态转移方程并通过递推算法求解获得库存水平稳态概率分布和系统稳态指标;接下来,构建库存成本函数;最后,采用数值试验的方法研究该库存系统的最优控制策略并考察系统参数的敏感性.     

Effect of In_x Ga_(1-x )N “continuously graded” buffer layer on InGaN epilayer grown by metalorganic chemical vapor deposition

In this paper we report on the effect of an In x Ga1-x N continuously graded buffer layer on an InGaN epilayer grown on a GaN template.In our experiment,three types of buffer layers including constant composition,continuously graded composition,and the combination of constant and continuously graded composition are used.Surface morphologies,crystalline quality,indium incorporations,and relaxation degrees of InGaN epilayers with different buffer layers are investigated.It is found that the In x Ga1-x N continuously graded buffer layer is effective to improve the surface morphology,crystalline quality,and the indium incorporation of the InGaN epilayer.These superior characteristics of the continuously graded buffer layer can be attributed to the sufficient strain release and the reduction of dislocations.     

Influence of thermal stress on the characteristic parameters of AlGaN/GaN heterostructure Schottky contacts

Ni Schottky contacts on AlGaN/GaN heterostructures have been fabricated. The samples are then thermally treated in a furnace with N₂ ambient at 600 ^circC for different times (0.5, 4.5, 10.5, 18, 33, 48 and 72 h). Current-voltage (I-V) and capacitance-voltage (C-V) relationships are measured, and Schrödinger's and Poisson's equations are self-consistently solved to obtain the characteristic parameters related to AlGaN/GaN heterostructure Schottky contacts: the two-dimensional electron gas (2DEG) sheet density, the polarization sheet charge density, the 2DEG distribution in the triangle quantum well and the Schottky barrier height for each thermal stressing time. Most of the above parameters reduce with the increase of stressing time, only the parameter of the average distance of the 2DEG from the AlGaN/GaN interface increases with the increase of thermal stressing time. The changes of the characteristic parameters can be divided into two stages. In the first stage the strain in the AlGaN barrier layer is present. In this stage the characteristic parameters change rapidly compared with those in the second stage in which the AlGaN barrier layer is relaxed and no strain is present.