5-芳胺-4,7-吲唑二酮的合成

以1,4-对醌、芳肼为原料,通过Aza-Nenitzescu反应、氧化银氧化得到吲唑醌,亲核试剂(各种芳香胺)在Ce3 催化下与吲唑醌发生迈克尔加成反应,得到一系列5-芳氨基基取代的吲唑醌.化合物结构经元素分析、IR及1H NMR证实.初步的生理活性研究表明,这些化合物具有良好的抗哮喘活性.     

5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮的合成

用1-芳酰基-5-苯基-2-硫代双脲与溴进行氧化成环反应制备了九个新的5-芳酰氨基-2-苯基-2H-1, 2, 4-噻二唑-3-酮, 相应的1-芳酰基-5-苯基-2-硫代双脲可以通过苯基脲与酰基异硫氰酸酯加成制得。     

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

流动注射区域采样法测定镀锌钝化液中高浓度锌

本文建立了流动注射二甲酚橙光度法测定镀锌纯化液中Ｚｎ￣２＋的自动分析方法。利用区域采样技术和调整管路参数自动完成对样品的上千倍稀释，确定了最佳分析条件并研究了干扰离子的影响及消除办法。所建方法仪器简单，分析速度为８４次／小时，变异系数（Ｚｎ￣２＋１６．０ｇ／Ｌ，ｎ＝２０）为１．Ｏ％，用于实际钝化液分析，相对误差小于±１０％。     

单分散二氧化钛超微粒子的制备

以四丁氧基钛为原料，采用溶胶－凝胶法制备了超微二氧化钛粉末．改变热处理气氛、升温速率、水与四丁氧基钛的摩尔比以及溶剂，分别得到７ｎｍ球形单相锐钛矿以及四方形（４０ｎｍ×１０ｎｍ）、球形（４４ｎｍ）的主相金红石超微粒子．     

聚合物{[CuII(Hpb) (mal)]H2O}n :单体的量子化学计算和磁性研究

{[Cu^Ⅱ（Hpb）（mal）]H=O}n （Hpb=2-2＇-pyridylbenzimidazole, mal=maleic acid） is a helical chain-like polymer complex. In order to investigate the electronic structure of the complex, the monomer Cu^Ⅱ（Hpb）（mal） was obturated with different functional groups respectively. For these selective segments, the geometry optimizations were conducted by using hybrid DFT （B3LYP）methods to find that the structure obturated with H2O was better consistent with the experiment, and then this model would be used to latter calculations, such as the frontier molecular orbital and the NBO charge population analysis. In addition the magnetic behaviors of this complex were analyzed by experiments and the weak antiferromagnetic couple between copper（Ⅱ） ions was observed. The exchange coupling constant was calculated by DFT based on the spin broken symmetry formalism. The calculated coupling constants were in good agreement with the experimental data.     

THE DIFFRACTION OF NORMALLY INCIDENT SAW BY ACOUSTIC GRATING

The diffraction phenomena of SAW normally incident on acoustic gratings have been developed.The acoustic grating which is composed of a periodic array of metal film stripes is fabricated on thesurface of Y-cut LiNbO_3 on which the SAWs propagate. Theoretically,the diffraction characteristics of the gratings on which the SAW beam normallyimpinges are analyzed by means of the phenomenological theory.The emphases are laid on twospecial cases,i.e."thin grating"and"thick grating"situations.For the former,the Raman-Nathapproximation is quoted from the theory of acousto-optical diffraction.For the latter,the analyticalexpressions of the diffracted intensities are deduced by using the normal mode theory. Experimentally,two sorts of samples which correspond respectively to"thick grating"and"thingrating"are designed and fabricated.Some interesting results are obtained by means of the opticalmethods.The images of the SAWs power flows of the diffracted acoustic fields as well as the SAWwavefronts within the grating     

表面电沉积Ni—La2O3复合镀层的Fe26Cr1Mo不锈钢的氧化行为研究

Ｆｅ２６Ｃｒ１Ｍｏ不锈钢在９００℃氧化时，生成的氧化层在冷却过程中大量剥落，经表面共电沉积ＮｉＬａ２Ｏ３复合镀层后，抗热循环能力明显提高。     

双亲嵌段聚合物的合成与应用

本文介绍了双亲嵌段聚合物的合成方法，包括共溶剂法、聚合后功能化法、胶束聚合法、自由基界面聚合法等，以及双亲嵌段聚合物在乳液聚合、三次采油、医用高分子材料等方面的应用。