Synthesis and Structural Characterization of [Mn（sapn）（H2O）2]Br

1 INTRODUCTION Many of the recent advances in the coordination chemistry of manganese have been driven by the involvement of the manganese in several biological redox-active systems[1,2], of which the most important is the oxygen-evolving complex (EOC) of photosystem II (PS II) in green plants [3]. Since the preparations and structural characterizations of the complexes containing N,O-donor ligands have been studied extensively as simple active-site models for the photosystem II[4,5]…     

铋膜电极微分电位溶出法测定生物材料中痕量铅

研究了镀铋膜电极替代镀汞膜电极痕量铅的微分电位溶出分析法(DPSA)。考察并优化了同位镀铋膜测定铅的条件。结果表明,在HAc-NaAc(pH=4.4)介质中,铅可在镀铋膜电极上得到灵敏的微分电位溶出峰;利用标准加入法对人尿及血中痕量铅进行了测定。本法避免了镀汞膜电极对人体健康及环境的危害。     

Ca2+和Mn2+共掺杂Ba1-xSrxTiO3固溶体的制备及其电学性能研究

(Ca, Mn)-codoped Ba1-xSrxTiO3 (BST) solid solution, i.e. Ba0.4Sr0.5Ca0.08Mn0.02TiO3, was successfully synthesized via sol-gel process. The product was characterized by TG-DTA thermal analyses, XRD, TEM.The effects of both curing temperature and applied voltage on the resistance, etc. were investigated. It showed that the structure of BST was unable to be changed even though it was codoped by Ca2+ and Mn2+. TEM photographs demonstrated the influence of curing temperature on the morphologies of the tested samples. The dependence of resistance on the curing temperature illustrated that (Ca, Mn)-codoped BST was capable of exhibiting the positive temperature coefficient (PTC) effect at low frequency; nevertheless,it might display the negative temperature coefficient (NTC) effect at other frequencies. The relationships between the resistance and applied voltage revealed that the resistance property of (Ca, Mn)-codoped BST appeared at low frequencies, but its property of capacitive reactance might present at high frequency. These findings mean that the electrical property of BST can be adjusted by codoping method. These phenomena can be explained by the grain boundary resistance effect, Heywang model and ion polarization theory.     

Rh/SiO2催化剂上甲烷部分氧化制合成气的核磁共振研究

 利用1H MAS NMR技术,在甲烷部分氧化(POM)制合成气反应条件下研究了Rh/SiO2催化剂上氢与金属的相互作用及反应机理. 结果发现,氢气在Rh/SiO2上解离吸附后可能有四种存在形式: 化学位移为δ=-100～-120的可逆(αM)和不可逆(αI)吸附氢物种,δ=0～-100的“氢云”或“氢雾”形式的氢物种和δ=3.0的溢流氢物种. 溢流氢物种是由可逆吸附的氢物种和“氢云”或“氢雾”状态的氢物种溢流到SiO2上并弱吸附在桥式氧(Si-O-Si)附近而形成的. 溢流氢物种活化晶格氧,形成一种POM反应的活性氧物种OH-. 活性氧物种OH-反溢流到Rh上,并与CH4解离吸附在Rh上的CHx物种反应生成含氧中间物种CHxO. CHxO物种的化学位移为5～7. O2参与CHxO物种的进一步氧化,或补充溢流氢夺取桥式氧后形成的缺陷位上的晶格氧,在高温(973 K)反应条件下,O2可能优先补充缺陷位上的晶格氧,使CHx的氧化按表面反应机理进行.     

非弹性体增韧—聚合物增韧的新途径

本文是一篇关于非弹性增韧方法的综述。文章首先简要回顾了传统的橡胶增韧韧性聚合物材料的机理,然后着重介绍了最近在国外出现的刚性有机填料(ROF)增韧的基本概念、分析方法和增韧的冷拉机理,列举了脆性塑料粒子和韧性基体组成的合金体系的大量实验结果来说明以上内容,最后通过与传统橡胶增韧机理的对比指出非弹性体增韧是不同于后者的一种新增韧方法,并有可能成为制备高强度、高韧性工程塑料的一种新途径。     

环氧交联网Tg转变的tanδ-T曲线解析

 本文系统地研完了预聚物分子量、固化剂配比和固化条件对环氧交联网T_g松弛内耗峰松弛时间分布的影响。本实验和理论研究结果首次证明了环氧交联网T_g松弛过程具有单一松弛时间描述的线性标准固体的特征,与预聚体分子量、固化剂配比和固化条件无关。此结果可用环氧交联网的两相结构特征加以解释。     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

 本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c)有关;高温吸热峰(峰温T_m)较大,几乎不受T_n的影响。T′_m的出现与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。     

介孔沸石材料

介孔沸石材料是含有丰富介孔的结晶沸石,不仅保留了沸石材料优良的酸性和水热稳定性,而且由于介孔的引入改善了其对大分子的吸附和扩散性能,在催化领域特别是涉及大分子的催化反应中是极有应用前景的材料。本文综述了介孔沸石材料的制备方法并进行了比较分析,概述了近年来介孔沸石材料在不同催化反应中的应用,探讨了介孔沸石材料今后的研究方向。     

A New Criterion for Brittle-Ductile Transition of Polymer Blends

The T_c criterion was first used by S. Wu for characterizing the brittleductile (B-D) transition of N6/EPDM blends. But in this paper, a new criterion which is based on the stress analysis of blends is proposed to characterize the B-D transitions of blends, namely, A criterionV_(fc) and d_c are the critical volume fractions and particle size of dispersed particles in blends, respectively. For given blends, A is independent of the morphology of dispersed phase and is only the characteristic parameter of matrix. The B-D transitions of different blends, including polar N6/EPDM blends, nonpolar PP/EPDM blends and PE/CaCO_3 composites, were manipulated with A criterion and satisfactory results were obtained. In addition, a new master curve for the impact strength of PP/EPDM blends versus V_f~2/d was obtained. The results showed that A criterion is more suitable than T_c criterion for characterizing the B-D transition of blends.