平行风风速对腔体复合热损失特性影响的数值模拟

在恒热流边界条件和不同平行风风速下,考虑通过保温层和腔体壁面的导热热损失,采用三维数值模拟方法对一侧全开的圆柱形腔体复合对流和辐射热损失特性进行研究。结果表明:平行风下,腔体内的温度分布和开口面速度分布都与无风时存在很大差异;随着风速的增大,对流热损失平均努塞尔数Nu_c单调递增,而辐射热损失平均努塞尔数Nu_r并不单调递减,且风速越大,变化越不明显;随着腔体倾角的增大,同一风速下Nu_c和Nu_r并不像无风时那样单调变化。     

Microwave absorption properties regulation and bandwidth formula of oriented Y2Fe17N3-δ@SiO2/PU composite synthesized by reduction-diffusion method

As concepts closely related to microwave absorption properties, impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms. In this work, reduction-diffusion method was innovatively applied to synthesize rare earth alloy Y$_{2}$Fe$_{17}$. In order to regulate the electromagnetic parameters of absorbers, the Y$_{2}$Fe$_{17}$N$_{3-\delta }$ particles were coated with silica (Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$) and absorbers with different volume fractions were prepared. The relationship between impedance matching, matching thickness, and the strongest reflection loss peak (${\rm RL}_{\rm min}$) was presented obviously. Compared to the microwave absorption properties of Y$_{2}$Fe$_{17}$N$_{3-\delta }$/PU absorber, Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$/PU absorbers are more conducive to the realization of microwave absorption material standards which are thin thickness, light weight, strong absorbing intensity, and broad bandwidth. Based on microwave frequency bands, the microwave absorption properties of the absorbers were analyzed and the related parameters were listed. As an important parameter related to perfect matching, reflection factor ($\sqrt {ărepsilon_{\rm r}/\mu_{\rm r}}$) was discussed combined with microwave amplitude attenuation. According to the origin and mathematical model of bandwidth, the formula of EAB (${\rm RL}<-10$ dB) was derived and simplified. The calculated bandwidths agreed well with experimental results.     

The thermal effect in diode-end-pumped continuous-wave 914-nm Nd:YVO4 laser

The thermal effect and the heat generation in diode-end-pumped continuous-wave 914-nm Nd:YVO₄ lasers are investigated in detail. A theoretical model of a diode end-pumped solid-state laser is constructed to analyse the influence of fractional thermal loading on the thermal effect in the Nd:YVO₄ laser based on finite element analysis. The thermal focal lengths and the end-surface deformations of laser rods in Nd:YVO₄ quasi-three-level and four-level lasers are measured and compared with the results obtained by ordinary interferometry for the demonstration of higher thermal loading in 914-nm laser. Finally the fractional thermal loading in the Nd:YVO₄ quasi-three-level laser is calculated by matching the experimental and the simulated end deformations.     

Selective excitation of molecular mode in a mixture by femtosecond resonance-enhanced coherent anti-Stokes Raman scattering spectroscopy

Femtosecond time-resolved coherent anti-Stokes Raman scattering (CARS) spectroscopy is used to investigate gaseous molecular dynamics. Due to the spectrally broad laser pulses, usually poorly resolved spectra result from this broad spectroscopy. However, it can be demonstrated that by the electronic resonance enhancement optimization control a selective excitation of specific vibrational mode is possible. Using an electronically resonance-enhanced effect, iodine molecule specific CARS spectroscopy can be obtained from a mixture of iodine-air at room temperature and a pressure of 1 atm (corresponding to a saturation iodine vapour as low as about 35 Pa). The dynamics on either the electronically excited state or the ground state of iodine molecules obtained is consistent with previous studies (vacuum, heated and pure iodine) in the femtosecond time resolved CARS spectroscopy, showing that an effective method of suppressing the non-resonant CARS background and other interferences is demonstrated.     

光源稳定性对简并四波混频信噪比影响的实验研究

在碘蒸气中研究了染料激光稳定性对简并四波混频(DFWM)信噪比的影响。实验中采用多模Nd∶YAG激光器倍频的输出泵浦染料激光器(染料PM580溶于酒精)。在具有前向补偿分光系统和图像探测系统的帮助下,在常温常压条件下测得泵浦光在波长为554.013 nm时达到饱和光强为290 μJ。同时发现染料激光器的光稳定性(输出波长范围,光束质量和能量转换效率等)随使用时间,泵浦激光脉冲次数和能量的增加而逐渐减弱。另外通过对比发现在染料激光器输出不稳定时,光源单色性和指向性等指标的变化导致在同一泵浦强度不同时刻获得的DFWM信号强度相差很大,且DFWM信号信噪比低。染料激光器光源稳定性对DFWM信号影响的研究结果对物质的痕迹量探测以及无荧光物质光谱定标等方面的应用具有重要意义。     

Structural Deformation of CO22+ in Intense Femtosecond Laser Fields

The angular distributions of CO^＋ from the dissociation of CO2^2＋ and CO2^＋ in intense femtosecond laser fields （45 fs, about 5 × 10^15 W/cm^2） are studied at a laser wavelength of 800nm based on the time-of-flight mass spectra of CO^＋ fragment ions. The experimental results show that structural deformation occurs in the charge state of CO2^2＋ and the CO^＋ maintains linear geometrical structure.     

GaAs／GaInNAsSb超晶格性能的影响

用Keafing的价力场(valence force field)模型和蒙特卡罗方法计算了GaAs／GaInNAsSb超晶格中键的分布、原子的精确位置以及应变．用折叠谱(foldedspectrummethod)合Williamson经验赝势法计算了GaAs／GaInNAsSb超晶格应变条件下的电子结构．讨论了N和Sb原子以及超晶格单分子层数对电子结构的影响．发现导带底电子态在N原子周围的局域化减小了光跃迁矩阵元，从而影响了该超晶格的发光性能．计算并讨论了超晶格的电子和空穴的有效质量．     

Adaptive and optimal detection of elastic object scattering with single-channel monostatic iterative time reversal

In active sonar operation,the presence of background reverberation and the low signal-to-noise ratio hinder the detection of targets.This paper investigates the application of single-channel monostatic iterative time reversal to mitigate the difficulties by exploiting the resonances of the target.Theoretical analysis indicates that the iterative process will adaptively lead echoes to converge to a narrowband signal corresponding to a scattering object’s dominant resonance mode,thus optimising the return level.The experiments in detection of targets in free field and near a planar interface have been performed.The results illustrate the feasibility of the method.     

透明陶瓷透光性能的影响因素

 研究了影响激光透明陶瓷透光性能的主要因素,讨论了陶瓷内部气孔和杂质颗粒等散射粒子、晶界结构中晶界折射率与晶粒折射率的差异以及晶界表面粗糙度等因素对陶瓷透光性能的影响,并定量分析了激光陶瓷透过率随气孔尺寸、气孔率、晶粒相对晶界折射率以及晶界表面粗糙度的变化关系。结果表明： 陶瓷的透过率随着气孔率的减小而增大,但透过率随气孔尺寸的增大而呈现出周期性振荡,且当气孔尺寸与入射光波长可比拟时,陶瓷的透过率会明显降低;在晶界结构中,晶界的折射率与晶粒的折射率相差越小,陶瓷的透过率就越高;晶界表面粗糙度越大,透过率越低。然而,晶界折射率不同于晶粒折射率,这使得其陶瓷透过率降低的程度比对晶界表面粗糙度的影响明显得多。在陶瓷制备过程中,需要重点排除尺寸与入射波长可比拟的气孔, 以抑制晶界结构中第二相的产生。     

类钙钛矿化合物Ca(Mn2 Cu1)Mn4 O12的磁性与磁电阻效应

利用固相反应法制备了名义成分为Ca(Mn2 Cu1 )Mn4 O1 2 的类钙钛矿锰氧化物 .x射线衍射表明 ,为了获得较为致密的样品和减小杂相含量 ,可以采用高温烧结再在 10 73K长时间空气中退火的制备方法 .样品在低温下同时存在铁磁相和反铁磁相 ,由于反铁磁相的存在导致样品在 4 5K时的磁化强度显著降低 ,并在 8T的高磁场下仍未达到饱和 .样品呈半导体导电性质 ,在 85K和 6T磁场下磁电阻比的最大值可达 - 4 6 % .