Characteristics of xenon-lamp pumped pyrromethene 567-doped dye laser based on polymethylmethacrylater

The solid-state medium containing pyrromethene 567 (PM567) in a polymethylmethacrylate polymer host is shown to lase under the flash lamp excitation. The experimental setup is an ordinary industrial product without special design. The bulk transmission losses, the output energy, and the other lasing properties are compared. The medium with the lowest transmission loss, measured to be 0.392 %/cm at 633 nm, gives a laser output of 130 mJ with a slope efficiency of 0.082%.     

LiNbO3负极薄膜电化学性能及全固态薄膜锂离子电池应用

全固态薄膜锂离子电池具有易微型化与集成化等优点,因此,非常适合为微系统供电。负极对全固态薄膜锂离子电池的性能有重要影响。现有电池通常采用金属锂作为负极,然而其枝晶生长问题及低的热稳定性限制了相应电池在工业、军事等高温、高安全场合应用。为此,本文系统研究了LiNbO₃薄膜的电化学性能,结果表明:LiNbO₃薄膜呈现高比容量(410.2 mAh·g^-1)、高倍率(30C时比容量80.9 mAh·g^-1)和长循环性能(2000圈循环后的容量保持率为100%),以及高的室温离子电导率(4.5×10^-8 S·cm^-1)。在此基础上,基于LiNbO3薄膜构建出全固态薄膜锂离子电池Pt|NCM523|LiPON|LiNbO₃|Pt,其展现出较高的面容量(16.3μAh·cm^-2)、良好的倍率(30μA·cm^-2下比容量1.9μAh·cm^-2)及长循环稳定性(300圈循环后的容量保持率...     

Microwave absorption properties regulation and bandwidth formula of oriented Y2Fe17N3-δ@SiO2/PU composite synthesized by reduction-diffusion method

As concepts closely related to microwave absorption properties, impedance matching and phase matching were rarely combined with material parameters to regulate properties and explore related mechanisms. In this work, reduction-diffusion method was innovatively applied to synthesize rare earth alloy Y$_{2}$Fe$_{17}$. In order to regulate the electromagnetic parameters of absorbers, the Y$_{2}$Fe$_{17}$N$_{3-\delta }$ particles were coated with silica (Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$) and absorbers with different volume fractions were prepared. The relationship between impedance matching, matching thickness, and the strongest reflection loss peak (${\rm RL}_{\rm min}$) was presented obviously. Compared to the microwave absorption properties of Y$_{2}$Fe$_{17}$N$_{3-\delta }$/PU absorber, Y$_{2}$Fe$_{17}$N$_{3-\delta }$@SiO$_{2}$/PU absorbers are more conducive to the realization of microwave absorption material standards which are thin thickness, light weight, strong absorbing intensity, and broad bandwidth. Based on microwave frequency bands, the microwave absorption properties of the absorbers were analyzed and the related parameters were listed. As an important parameter related to perfect matching, reflection factor ($\sqrt {ărepsilon_{\rm r}/\mu_{\rm r}}$) was discussed combined with microwave amplitude attenuation. According to the origin and mathematical model of bandwidth, the formula of EAB (${\rm RL}<-10$ dB) was derived and simplified. The calculated bandwidths agreed well with experimental results.     

碳酸二甲酯和乙酸苯酯合成碳酸二苯酯MoO3催化剂的失活研究

利用直接焙烧法在400℃焙烧(NH4)6MoO7O24.4H2O制备了碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的正交晶系MoO3催化剂,通过比表面积(BET)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅立叶变换红外光谱(FT-IR)、扫描电镜(SEM)等技术,对MoO3催化剂在失活前后的结构和形貌进行了分析,探讨了MoO3催化剂的失活行为.结果表明,正交晶系MoO3的(021)、(110)晶面有利于酯交换反应,多次使用后,催化剂表面有无定形碳的物理沉积,催化剂比表面积降低,催化剂颗粒长径比发生了改变,催化剂(021)、(110)晶面衍射峰强度减弱,进而导致了MoO3催化剂的失活.     

基于H型谐振器的Ku波段高温超导滤波器设计

高温超导滤波器已在移动通信、射电天文、雷达探测等多个领域获得了重要应用.当前高温超导滤波器的研究和应用主要集中于10GHz以下的频段,针对超高频段(>10GHz)高温超导滤波器的研究很少.本文设计优化了具有无载Q值高、耦合强、尺寸短等特点的H型阶跃阻抗谐振器,并讨论了超高频段滤波器端口激发源的电容效应对滤波器响应的影响,最后采用优化的H型谐振器,应用去嵌入(De-Embed)设计方法消除端口效应,设计了中心频率为16GHz,相对带宽12.5%的6节高温超导滤波器.研制的超导滤波器在未经调谐的情况下,测试结果与仿真结果符合得很好,插入损耗小于0.3dB,反射损耗优于-14dB,带外抑制达到了-70dB.     

Selective excitation of molecular mode in a mixture by femtosecond resonance-enhanced coherent anti-Stokes Raman scattering spectroscopy

Femtosecond time-resolved coherent anti-Stokes Raman scattering (CARS) spectroscopy is used to investigate gaseous molecular dynamics. Due to the spectrally broad laser pulses, usually poorly resolved spectra result from this broad spectroscopy. However, it can be demonstrated that by the electronic resonance enhancement optimization control a selective excitation of specific vibrational mode is possible. Using an electronically resonance-enhanced effect, iodine molecule specific CARS spectroscopy can be obtained from a mixture of iodine-air at room temperature and a pressure of 1 atm (corresponding to a saturation iodine vapour as low as about 35 Pa). The dynamics on either the electronically excited state or the ground state of iodine molecules obtained is consistent with previous studies (vacuum, heated and pure iodine) in the femtosecond time resolved CARS spectroscopy, showing that an effective method of suppressing the non-resonant CARS background and other interferences is demonstrated.     

带跳的Gauss积分过程幂变差的渐近行为

研究了Xt=∫t0φsdGs+ξt已实现幂变差的渐近理论,其中G为平稳增量Gauss过程,φ为随机过程,ξ为与G独立的非Gauss Lévy过程,而积分为按路径Riemann-Stietjes积分.给出了经适当规范化后已实现幂变差的概率极限定理以及相应的中心极限定理,这些结果将为处理长期记忆跳过程的统计问题提供理论基础.     

Tunable Ba0.5Sr0.5TiO3 film bulk acoustic resonators using SiO2/Mo Bragg reflectors

Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators（FBARs） based on SiO 2 /Mo Bragg reflectors are explored,which can withstand high temperature for the deposition of Ba x Sr 1 x TiO 3（BST） films at 800 C.The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect.The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing,while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias（ 45 V） while downwards at higher dc bias.The calculated relative tunability of shifts at series resonance frequency is around 2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias,which can be comparable to AlN FBARs.This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum（Mo） as the high acoustic impedance layer in a Bragg reflector,which not only provides excellent acoustic isolation from the substrate,but also improves the crystallinity of BST films withstanding higher deposition temperature.     

红外光谱在线监控对二苯脲合成反应进程的研究

利用ReactIRTM4000实验室在线红外分析系统对脲和苯胺合成二苯脲反应进行在线监控,通过监测反应物脲(1 420 cm-1)和苯胺(1 270 cm-1)、中间产物苯基脲(1 339 cm-1)及产物二苯脲(1 312 cm-1)特征峰的变化,推断出反应体系中各组分浓度的变化,从而清楚地了解了该反应的进程。研究的结果证明脲和苯胺合成二苯脲的过程是脲和苯胺先生成中间产物苯基脲,苯基脲再和苯胺生成二苯脲。结果表明在线红外分析能够快速、简便、准确地确定出反应的最佳时间,从而达到对合成反应的进程进行控制的目的。     

光源稳定性对简并四波混频信噪比影响的实验研究

在碘蒸气中研究了染料激光稳定性对简并四波混频(DFWM)信噪比的影响。实验中采用多模Nd∶YAG激光器倍频的输出泵浦染料激光器(染料PM580溶于酒精)。在具有前向补偿分光系统和图像探测系统的帮助下,在常温常压条件下测得泵浦光在波长为554.013 nm时达到饱和光强为290 μJ。同时发现染料激光器的光稳定性(输出波长范围,光束质量和能量转换效率等)随使用时间,泵浦激光脉冲次数和能量的增加而逐渐减弱。另外通过对比发现在染料激光器输出不稳定时,光源单色性和指向性等指标的变化导致在同一泵浦强度不同时刻获得的DFWM信号强度相差很大,且DFWM信号信噪比低。染料激光器光源稳定性对DFWM信号影响的研究结果对物质的痕迹量探测以及无荧光物质光谱定标等方面的应用具有重要意义。