Polyurethane foam extraction of platinum-tin halide complexes

The sorptive capacity of the polyether-based foam was determined to be between 0.85 and 0.92 moles/kg for the platinum-tin(II) chloride complex. At hydrochloric and hydrobromic acid concentrations up to 3.0M, the platinum-tin(II) bromide complex had higher extraction efficiencies than the platinum-tin(II) chloride complex. Sorptions were optimized at 5.0M hydrochloric acid and 3.0M hydrobromic acid and distribution ratios as high as 2.0 x 10(5) 1./kg were observed at high foam:platinum ratios. The percent of platinum extracted increased when the alkali metal cations are added in the order K(+) < Na(+) < Li(+) for polyether foam, and decreased in the order K(+) > Na(+) > Li(+) for polyester foam. Also, the sorption efficiencies increased as the proportion of poly(ethylene oxide) of the foam was increased. A Scatchard plot analysis shows that there is a 2:1 ratio of loosely bound platinum to tightly bound platinum with the polyether foam, however, the experimental results are consistent with a weak-base anion exchange mechanism as the prominent method of sorption. For polyester foam, results are consistent with a solvent-like ion-pair sorption mechanism.     

Spectroscopic studies of the interaction of ferrous bleomycin with DNA

Bleomycin is an antibiotic used in cancer chemotherapy for its ability to achieve both single- and double-strand cleavage of DNA through abstraction of the deoxyribose C4'-H. Magnetic circular dichroism (MCD) and X-ray absorption (XAS) spectroscopies have been used to study the interaction of the biologically relevant FeIIBLM complex with DNA. Calf thymus DNA was used as the substrate as well as short oligonucleotides, including one with a preferred 5'-G-pyrimidine-3' cleavage site [d(GGAAGCTTCC)2] and one without [d(GGAAATTTCC)2]. DNA binding to FeIIBLM significantly perturbs the FeII active site, resulting in a change in intensity ratio of the d d transitions and a decrease in excited-state orbital splitting (5Eg). Although this effect is somewhat dependent on length and composition of the oligonucleotide, it is not correlated to the presence of a 5'-G-pyrimidine-3' cleavage site. No effect is observed on the charge-transfer transitions, indicating that the H-bonding recognition between the pyrimidine and guanine base does not perturb Fe-pyrimidine backbonding. Azide binding studies indicate that FeIIBLM bound to either oligomer has the same affinity for N3-. Parallel studies of BLM structural derivatives indicate that FeIIiso-PEPLM, in which the carbamoyl group is shifted on the mannose sugar, forms the same DNA-bound species as FeIIBLM. In contrast, FeIIDP-PEPLM, in which the -aminoalanine group is absent, forms a new species upon DNA binding. These data are consistent with a model in which the primary amine from the -aminoalanine is an FeII ligand and the mannose carbamoyl provides either a ligand to the FeII or significant second-sphere effects on the FeII site; intercalation of the bithiazole tail into the double helix likely brings the metal-bound complex close enough to the DNA to create steric interactions that remove the sugar groups from interaction with the FeII. The fact that the FeII active site is perturbed regardless of DNA sequence is consistent with the fact that cleavage is observed for both 5'-GC-3' and nonspecific oligomers and indicates that different reaction coordinates may be active, depending on orientation of the deoxyribose C4'-H.     

Perfecting imperfect "monolayers": removal of siloxane multilayers by CO2 snow treatment

Self-assembled monolayers (SAMs) of N-(3-triethoxysilylpropyl)-4-hydroxybutyramide were prepared on silicon oxide on silicon (Si/SiO(2)). Initial silane adsorption and high-temperature annealing led to a stable base monolayer with many large over-lying islands of disordered multilayers as a result of the non-self-limited growth process. The disordered multilayers were hydrolyzed and subsequently removed by CO(2) snow treatment. The resulting films were one monolayer thick as measured by ellipsometry. Atomic force microscopy, attenuated total reflection Fourier transform infrared spectroscopy, and contact angle analysis showed that the films were composed of monolayers with full and uniform surface coverage rather than nonuniform coverage by islands or patches of multilayers. Monolayers of octadecyltrichlorosilane were also prepared by multilayer removal via CO(2) treatment, showing the general applicability of the technique toward siloxane SAMs. We believe that CO(2) is an excellent solvent for weakly bound and hydrolyzed molecules that compose multilayers, and this ability to prepare near-perfect monolayer films from imperfect ones allows for less stringent formation conditions.     

Rapid determination of five probe drugs and their metabolites in human plasma and urine by liquid chromatography/tandem mass spectrometry: application to cytochrome P450 phenotyping studies

A liquid chromatography/mass spectrometry method, for rapid determination of five cytochrome P450 (CYP) probe drugs and their relevant metabolites in human plasma and urine, is described. The five specific probe substrates/metabolites, caffeine/paraxanthine (CYP1A2), tolbutamide/4-hydroxytolbutamide/carboxytolbutamide (CYP2C9), omeprazole/5-hydroxyomeprazole (CYP2C19), debrisoquine/5-hydroxydebrisoquine (CYP2D6) and midazolam/1'-hydroxymidazolam (CYP3A), together with the internal standards (phenacetin and paracetamol), in plasma and urine, were extracted using solid-phase extraction. The chromatography was performed using a C18 column with an isocratic mobile phase consisting of acetonitrile and 0.1% formic acid in water (70:30). The triple-quadrupole mass spectrometer was operated in both positive and negative modes, and multiple reaction monitoring was used for quantification. The method was validated over the concentration ranges 0.05-5 microg/mL for caffeine and paraxanthine, 0.02-2 microg/mL for tolbutamide, 0.1-20 microg/mL for 4-hydroxytolbutamide, carboxytolbutamide, debrisoquine and 5-hydroxydebrisoquine, 5-2500 ng/mL for omeprazole and 5-hydroxyomeprazole, and 1-100 ng/mL for midazolam and 1'-hydroxymidazolam. The intra- and inter-day precision were 0.3-13.7% and 1.9-14.3%, respectively, and the accuracy ranged from 93.5-107.2%. The lower limit of quantification varied between 1 and 100 ng/mL. The present method provides a robust, fast and sensitive analytical tool for the five-probe drug cocktail, and has been successfully applied to a clinical phenotyping study in 16 subjects.     

Platinum nanoparticles from the hydrosilylation reaction: capping agents, physical characterizations, and electrochemical properties

Platinum nanoparticles synthesized by a unique synthetic approach, the hydrosilylation reaction, have been reported previously. However, the interaction between the underlying platinum nanosupport and the capping agents is poorly understood. Here we continue to investigate Pt nanoparticles from the hydrosilylation reaction to address this issue and present the characterization results of nuclear magnetic resonance, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. These characterization results conclude that two different modes of binding of the aliphatic capping agents with the platinum surface are attributed to the formation of Pt-C bonds under excess olefin concentration and Pt-Si bonds under excess hydrosilane concentration. Morphology and UV-vis spectra of the platinum nanoparticles were explored by transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy. Moreover, electrochemical properties of the platinum nanoparticles were also studied by cyclic voltammetry and chronoamperometry.     

Demonstration of a passive subpicostrain fiber strain sensor

We demonstrate a fiber Fabry-Perot (FFP) sensor that is capable of detecting subpicostrain signals, from 100 Hz and extending beyond 100 kHz, using the Pound-Drever-Hall (PDH) frequency locking technique. A low-power diode laser at 1550 nm is locked to a free-space reference cavity to suppress its free-running frequency noise, thereby stabilizing the laser. The stabilized laser is then used to interrogate a FFP sensor whose PDH error signal yields the instantaneous fiber strain.     

Perylene synthesis by the parallel cycloaromatization of adjacent enediynes

As part of an investigation into new synthetic routes to poly(peri-naphthalene), the synthesis and cycloaromatization of tetraethynylbiphenyls is described. The temperature-dependent cyclization of biphenyls containing unsubstituted alkynes provides the desired perylene in good yield.     

Symmetries of excited heavy baryons in the heavy-quark and large- N(c) limit

We demonstrate in a model independent way that, in the combined heavy-quark and large- N(c) limit, there exists a new contracted U(4) symmetry which connects orbitally excited heavy baryons to the ground states.     

A study of the evaporation of gold solutions

The study indicates that despite several reports to the contrary, gold does not volatilize appreciably during the evaporation of aqueous solutions. Gold solutions were shown to have a tendency to creep significantly in solutions of various metal concentrations, acid content and salt content, and that careful washing must be carried out to obtain quantitative recovery.