一种生物柴油代用品在HZSM-5分子筛催化剂上的催化热解

为了深入了解生物柴油在ZSM-5沸石上的催化反应机理,在常压的流动反应器中进行了生物柴油代用品丁酸甲酯在氢型ZSM-5(HZSM-5)催化剂上的热解和催化热解. 热解产物使用气相色谱-质谱法定性和定量测量. 动力学模型和实验表明,气相中氢提取反应是热解过程中丁酸甲酯分解的主要途径,但在HZSM-5上,丁酸甲酯则主要通过解离生成烯酮和甲醇消耗;与无催化反应相比,丁酸甲酯在HZSM-5上的初始分解温度降低了约300 K. 并且通过Arrhenius方程获得了在催化热解和均相热解条件下丁酸甲酯消耗的表观活化能. 明显降低的表观活化能证实了HZSM-5对丁酸甲酯热解的催化性能. 此外催化剂的活化温度对HZSM-5的某些催化性能具有一定的影响. 该研究对进一步的实际生物柴油燃料的催化燃烧具有一定的指导意义.     

小间隙异面电极结构的光导开关

介绍了应用于介质壁加速器的小间隙异面电极结构的光导开关。所用光导开关为异面结构的砷化镓（GaAs）光导开关,电极间隙5 mm,偏置电压为15~22 kV脉冲高压,工作在非线性（高增益）模式,由半导体激光器产生的脉冲激光触发。脉冲激光的中心波长为905 nm,脉冲宽度（FWHM）约20 ns,前沿约3.1 ns,抖动小于200 ps,峰值功率约90 W。实验结果表明:光导开关的偏置电压较低时,开关寿命较长,导通性能较差;偏置电压较高、驱动脉冲激光功率较大时,开关导通性能较好,寿命较短。     

大脉冲电流下钨铜电极水和空气中的烧蚀特性

针对水中、空气中脉冲放电条件下金属电极烧蚀速率及烧蚀机理差异,对脉冲大电流作用下水中、空气中钨铜电极的烧蚀特性进行了对比研究。在保证放电电流波形一致性的前提下,通过采用高精度天平测量并获取了水中、空气中钨铜电极的阴、阳极烧蚀速率及总烧蚀速率,并对电极表面进行了二次电子观察和背散射电子观察分析。结果表明,大脉冲电流作用下,水中钨铜电极烧蚀较空气中更为严重,钨铜电极的烧蚀主要是金属蒸发引起的汽相侵蚀。由于水介质较空气具有不可压缩性,水中放电电弧集中,电极表面电弧斑点处电流密度和电流作用时间较空气中更为严重,同时由于水中脉冲放电时发生的高温物理化学反应,是造成水中电极烧蚀要高于空气中的根本原因。     

Tailoring of Bandgap and Spin-Orbit Splitting in ZrSe2 with Low Substitution of Ti for Zr

Tuning the bandgap in layered transition metal dichalcogenides（TMDCs） is crucial for their versatile applications in many fields. The ternary formation is a viable method to tune the bandgap as well as other intrinsic properties of TMDCs, because the multi-elemental characteristics provide additional tunability at the atomic level and advantageously alter the physical properties of TMDCs. Herein, ternary Ti_xZr_1-xSe₂ single crystals were synthesized using the chem...     

Simulation of a torrential rainstorm in Xinjiang and gravity wave analysis

We used a weather research and forecasting model to simulate a torrential rainstorm that occurred in Xinjiang, China during June 16–17, 2016. The model successfully simulated the rainfall area, precipitation intensity, and changes in precipitation. We identified a clear wave signal using the two-dimensional fast Fourier transform method; the waves propagated westwards, with wavelengths of 45–20 km, periods of 50–120 min, and phase velocities mainly concentrated in the-25 m/s to-10 m/s range. The results of wavelet cross-spectral analysis further confirmed that the waves were gravity waves, peaking at 11:00 UTC, June 17, 2016. The gravity wave signal was identified along 79.17–79.93°E, 81.35–81.45°E and 81.5–81.83°E. The gravity waves detected along 81.5–81.83°E corresponded well with precipitation that accumulated in 1 h, indicating that gravity waves could be considered a rainstorm precursor in future precipitation forecasts.     

Superconductivity of bilayer titanium/indium thin film grown on SiO_2/Si(001)

Bilayer superconducting films with tunable transition temperature(Tc) are a critical ingredient to the fabrication of high-performance transition edge sensors. Commonly chosen materials include Mo/Au, Mo/Cu, Ti/Au, and Ti/Al systems. Here in this work, titanium/indium(Ti/In) bilayer superconducting films are successfully fabricated on SiO_2/Si(001)substrates by molecular beam epitaxy(MBE). The success in the epitaxial growth of indium on titanium is achieved by lowering the substrate temperature to-150?C during indium evaporation. We measure the critical temperature under a bias current of 10 μA, and obtain different superconducting transition temperatures ranging from 645 m K to 2.7 K by adjusting the thickness ratio of Ti/In. Our results demonstrate that the transition temperature decreases as the thickness ratio of Ti/In increases.     

介质壁直线加速器加速单元间的电路耦合及解耦

中国工程物理研究院流体物理研究所研发的介质壁直线加速器是基于固态脉冲形成线、GaAs光导开关和高梯度绝缘介质壁三项关键技术的新型直线脉冲加速器。在加速器调试阶段,测量出获得加速的质子束流能量远低于预期值,在排除功率源负载能力因素之后,发现脉冲功率源因连接回路引起的电路耦合效应是导致束流能量低的主要原因。基于介质壁直线加速器加速单元放电回路结构的分析,确认了加速单元之间的电路耦合的必然性。并通过测量回路电流,研究了几种不同工作模式下的电路耦合效应。结合电路耦合的特点,给出了两种基于磁芯隔离的解耦方法,并测量了这两种方法的解耦效率。     

Spin-cluster glass state in U(Ga_(0.95)Mn_(0.05))_3

We report the study of a low temperature cluster glass state in 5% Mn-doped UGa_3 heavy fermion compound. This compound transforms from a paramagnetic state to a spin-cluster glass state, which is confirmed by measuring the dc susceptibility and magnetization. The ac susceptibility exhibits a frequency-dependent peak around Tf, which provides direct evidence of the cluster glass state. By analyzing the field-dependent magnetization and frequency-dependent ac susceptibility in detail, we deduce that this compound forms a spin-cluster glass state below T_f.     

绝缘微堆质子直线加速器关键技术研究进展北大核心CSCD

基于绝缘微堆技术的直线加速器由于其能够实现较高的粒子加速梯度,尤其在质子加速及肿瘤治疗领域的优势得到高度关注。目前该种加速器处于研发阶段,有一系列技术和工程问题有待解决。介绍了课题组在过去的两年里围绕建立一台1 MeV质子注入器原型样机在固态脉冲功率系统、绝缘微堆及质子束源等方面取得的研究进展。实现了耐压梯度接近20 MV/m的环形绝缘微堆样品,样品内径30 mm,外径50mm,厚度15mm,基本达到设计要求;固态脉冲功率系统实现了光导开关多路稳定工作模式,开关直流偏置耐压达到20kV,采用激光二极管触发同步系统在15路同步时实现了低于1ns的抖动,输出300kV的电压脉冲,输出电压脉冲宽度10ns;进行了低能质子加速束流动力学的初步分析和模拟工作,模拟结果表明采用微堆结构可以实现质子束的有效加速和传输。     

介质壁加速腔加速结构优化

为了在介质壁加速器中增大轴向加速电场, 提高加速梯度的同时抑制径向电场对束包络的扩张, 提出了在每个加速电极上添加金属栅网结构。采用基于粒子云网格方法的电磁粒子模拟软件对不加栅网与添加栅网的电极结构进行了数值仿真, 分析了不同结构下加速管道中的电场分布和束包络变化。通过实验对比了两种不同结构下经过相同的加速长度获得的粒子能量。结果表明:添加金属栅网结构相对于不加栅网的金属小孔式结构, 轴向加速电场强度提高20%, 同时径向电场得到有效抑制;栅网结构下, 被加速的粒子束在自由漂移空间中的径向发散基本得到抑制;在相同的加速长度下加速H3+粒子, 栅网结构得到的能量增益提高了一倍。