Design of ordered bimodal mesoporous silica materials by using a mixed fluorinated-hydrogenated surfactant-based system

Mesoporous silica materials have been prepared using aqueous solutions of hydrogenated-fluorinated surfactant mixtures. The phase behavior of the C18H35(OC2H4)10-C6F15C2H4(OC2H4)11OH [RH18(EO)10-RF6(EO)11] mixture in aqueous solution was first established at the temperature at which the silica source is added, i.e., 20 or 40 degrees C. We have delimited the different phase domains. Concerning the mesostructured silica, whatever the temperature at which the silica source is added, mesoporous material with a hexagonal array of their channel is formed via a cooperative templating mechanism (CTM), if the content of RF6(EO)11 in the surfactant mixture is lower than 50%. Moreover, when the silica source is added at 40 degrees C, the recovered materials exhibit a bimodal pore size distribution. The appearance of this bimodality has been related to the coexistence of hydrogenated micelles with fluorinated wormlike micelles. By contrast, the bimodality is not observed when the silica source is added at 20 degrees C.     

Native red electrophoresis--a new method suitable for separation of native proteins

A new type of native electrophoresis was developed to separate and characterize proteins. In this modification of the native blue electrophoresis, the dye Ponceau Red S is used instead of Coomassie Brilliant Blue to impose uniform negative charge on proteins to enable their electrophoretic separation according to their relative molecular masses. As Ponceau Red S binds less tightly to proteins, in comparison with Coomassie Blue, it can be easily removed after the electrophoretic separation and a further investigation of protein properties is made possible (e.g. an enzyme detection or electroblotting). The tested proteins also kept their native properties (enzyme activity or aggregation state).     

Coexistence of two kinds of fluorinated hydrogenated micelles as building blocks for the design of bimodal mesoporous silica with two ordered mesopore networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self-assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building blocks. The investigation of the R(F)(8)(EO)(9)/P123/water phase diagram shows that in the considered surfactant range of concentrations the system is micellar (L(1)). DLS measurements indicate that this micellar phase is composed of two types of micelles; the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles that have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica is really templated by two kinds of micelles.     

Pro-porous coordination polymers of the 1,4-bis((3,5-dimethyl-1H-pyrazol-4-yl)-methyl)benzene ligand with late transition metals

Solvothermal reactions of the flexible, pyrazole-based 1,4-bis((3,5-dimethyl-1H-pyrazol-4-yl)methyl)benzene ligand (H(2)BDMPX) with late transition metal ions allowed the isolation of the four coordination compounds M(x)(BDMPX) (x = 1 for M = Zn, 1; Co, 2; Cd, 3; x = 2 for M = Cu, 4). The investigation of the thermal behavior assessed the high thermal robustness of these materials, which are stable in air at least up to 300 °C, with the Cd(II) derivative starting to decompose only around 500 °C. As retrieved by ab initio X-ray powder diffraction, the isomorphous compounds 1-3 possess a dense 3-D network featuring rhombic motifs hinged about rigid and parallel chains of tetrahedral MN(4) chromophores. As demonstrated by thermodiffractometric measurements, temperature increase triggers framework flexibility. The latter is at work also when N(2) adsorption is assayed at 77 K: 1 and 2 show permanent porosity, with BET and Langmuir specific surface areas of 515, 667 m(2)/g and 209, 384 m(2)/g, respectively. 1 and 2 thus represent an intriguing example of "porosity without pores", their pro-porous nature being explained in terms of the flexibility of the rhombic motifs, stimulated by the gas probe and facilitated by the nature of the ligand.     

Ru膜上Pt层的自发沉积及其在电化学表面增强红外光谱中的应用

采用自发沉积法在Ru膜上生成超薄Pt层(简称Ru/Pt膜), 即在开路状态下将电化学还原后的Ru膜浸于除去氧的H2PtCl6溶液中进行自发沉积. 电化学伏安法测量表明, 随着电还原-自发沉积循环次数的增加, 该Ru/Pt膜电极所含Pt组分增加, 且CO吸附层的电氧化峰电位较Pt膜电极上的明显负移. 应用现场衰减全反射表面增强红外光谱法(ATR-SEIRAS)可轻易检测到在该膜电极Pt和Ru位上吸附CO的振动谱峰. 所制Ru/Pt膜电极不仅对CO的电催化氧化具有协同效应, 还可应用于现场ATR-SEIRAS的研究中.     

配合物[Co2(EGTB)Cl2]•(BF4)2•5H2O与DNA相互作用的研究

用紫外光谱法、荧光光谱法、黏度法、凝胶电泳法研究了双核钴(II)配合物[Co2(EGTB)Cl2]•(BF4)2•5H2O和DNA的相互作用, 在pH＝7.2的缓冲体系中, 求得配合物与DNA的结合常数. 结果表明, 配合物在接近生理条件下能有效地断裂pBR322DNA, 同时可使DNA的粘度增加, 使EB-DNA体系的荧光强度降低. 配合物与DNA的荧光光谱和紫外光谱表明, 配合物与DNA的作用既存在部分插入结合又存在静电结合模式.     

Synthesis and Crystal Structure of a New Three-dimensional Supramolecule of Copper（Ⅱ） Schiff Base Complex

A new three-dimensional supramolecule composed of copper-Schiff base complex, [Cu（naphdien）]Cl·H2O, where naphdien is Schiff base of 2-hydroxy-1-naphthaldehyde and diethylenetriamine, has been synthesized and determined by single-crystal X-ray diffraction. It belongs to the monoclinic system, space group P21/c, with a = 7.3490（15）, b = 7.0847（16）, c = 30.845（3）A, β= 95.33（3）°, V = 1599.0（5）A3, Z = 4, C15 H20ClCuN3O2, Mr = 373.33, De = 1.551 g/cm3, μ = 1.543 mm^-1, F（000） = 772, R = 0.0536 and wR = 0.0927 for 2788 unique reflections with 1659 observed ones （I 〉2σ（I））. In the crystal structure, mononuclear units [Cu（naphdien）]Cl·H2O are linked into a two-dimensional framework via strong hydrogen bonds, and extended into a three-dimensional supramolecular structure through π-π stacking interactions.     

THE EFFECT OF BLENDING SEQUENCE ON PHASE MORPHOLOGY OF NYLON 6/ABS/SMA BLENDS

The preparation process-dependent phase morphology of blends composed of nylon 6 and acrylonitrile-butadiene- styrene(ABS)over a composition range of 30-70 wt% using a styrene-maleic anhydride(SMA)copolymer as the compatibilizing agent with a constant content(5phr)was investigated.The results of the scanning electron microscope (SEM)observation revealed that compared with the binary blends of nylon 6 and ABS,the existence of SMA caused a composition shift of phase inversion to a higher weight fraction of...     

Development of a multipurpose ion source for LC-MS and GC-API MS

Over the past decade, multimode ion sources operating at atmospheric pressure (i.e., more than one ionization method is operative in the ion source enclosure) have received considerable interest. Simultaneous operation of different ionization methods targeting different compound classes within one analysis run has several advantages, including enhanced sample throughput and thus significant laboratory cost reductions. Potential drawbacks are enhanced ion suppression and other undesirable effects of the simultaneous operation of ionization methods. In this contribution we present an alternative approach-the development and characterization of a widely applicable, multipurpose ion source operating at atmospheric pressure. The optimized source geometry allows rapid changing from LC-API methods (ESI, APCI, APLI) to GC-API methods (APCI, APLI, DA-APLI) along with the appropriate coupling of chromatographic equipment required. In addition, true multimode operation of the source is demonstrated for LC-ESI/APLI and LC-APCI/APLI.     

一种以水相中微波促进下的多组分反应合成具有重要生物意义的茚并[2,1-e]吡唑并[5,4-b]吡啶的绿色方法

在无催化剂的条件下,以醛、3-甲基-1-苯基-1H-吡唑-5-胺和1,3-茚二酮为原料,通过水相中微波促进下的多组分反应,成功地实现了具有重要生物意义的茚并[2,1-e]吡唑并[5,4-b]吡啶的绿色合成。这种方法具有环境友好、反应时间短、产率高、价廉、操作简单以及广泛的适用范围等显著优点。