Ba7AgGa5S15:一种新型混合金属硫化物的非线性光学性能研究

采用高温熔融-自发结晶法成功获得一种新型混合金属硫化物Ba7AgGa5S15.该化合物结晶于非中心对称的P31c空间群(No.159),晶胞参数为a=0.964 53(10) nm,c=1.805 9(4) nm,Z=2.其结构是由[Ga4 S10] T2超四面体与[AgS4]四面体共顶点连结形成的含有18元环孔道的三维网状框架,孤立的[Ga(2)S4]四面体填充在孔道中,Ba2+填充在该三维框架结构的空隙当中.第一性原理计算研究了该化合物的电子结构、态密度、双折射率、二阶非线性光学系数,以及倍频密度.结果 表明,该化合物具有大的光学带隙(3.76 eV),其带隙主要由S3p,Ba5d和Ga4s轨道决定;其d33方向上的倍频系数约为AgGaS2的0.4倍,主要倍频贡献来源于[AgS4]和[GaS4]四面体.该研究表明在Ag-Ga-S体系中引入Ba2+,形成的Ba7 AgGa5S15表现出比AgGaS2更宽的带隙,有利于产生高的激光损伤阈值(LDT).     

复动量表象方法对奇特核中晕现象的研究

晕现象的研究使人们对核结构有了新的认识。连续谱,尤其是连续谱中的共振态在其中扮演着重要角色。复动量表象(CMR)方法不仅能够统一描述束缚态、共振态和连续谱,而且能够很好地描述窄共振和宽共振。本文介绍了CMR方法对原子核共振态的研究。给出了31Ne和19C等核的束缚态和共振态的单粒子能量随形变参数β₂的变化规律,分析了19C和31Ne中单中子晕形成的物理机制和在中子数N=20附近能级反转的原因,并预测了比37Mg重的核中的单中子晕现象,这一预测结果对在实验中寻找较重的晕核具有一定的参考价值。这些研究表明CMR 方法不仅适用于描述稳定核,也适用于描述具有弥散物质分布的奇特核。     

GGA+U法研究稀土(La、Ce、Pr、Nd)掺杂对ZnO电子结构和光学性质的影响

基于GGA+U的第一性原理方法,分析了La、Ce、Pr、Nd四种元素掺杂的ZnO结构,对晶体的结构、电子结构和光学性质进行了对比分析.由键布局分析可知,掺杂体系Zn-O键共价性的强弱与杂质掺入原子的序数成正比.掺杂后体系的类型仍为直接跃迁,能级整体下移;随着Pr、Nd掺入,出现了杂质能级,这是由稀土元素的4f电子态所导致.在光学性质方面,掺杂体系的吸收系数、静介电常数都比纯ZnO的高,体系的吸收边都向低能方向移动,其中Zn7LaO8的红移程度最高、静介电常数最大,说明其光催化能力和极化能力都最强.     

甲苯—2,4—二异氰酸酯修饰蒙脱土及聚苯乙烯／蒙脱土纳米复合材料？…

用ＦＴＩＲ和ＷＡＸＤ法研究了甲苯－２,４－二异氰酸酯（ＴＤＩ）的邻位和对位异氰酸酯基因与蒙脱土表面羟基的修饰反应,在此基础上提出了结构模型;用ＴＤＩ修饰后的蒙脱土成功制备了插层型聚苯乙烯／蒙脱土纳米复合材料,并用ＷＡＸＤ和ＴＥＭ进行了表征。实验结果表明,修饰后ＴＤＩ与蒙脱土表面形成化学键,使蒙脱土的片层间距显著增大,十六烷基三甲基溴化铵（ＣＴＡＢ）在蒙脱土层间由双层平行排列转变为双层脂肪链倾斜方式     

New conversion of Friendlnder reaction of 3-amino-1H-benzo[f]chromene-2-carbonitriles with cyclohexanone

Two different skeletons of heterocyclic compounds,quinoline and quinazolinone analogs could be obtained by a novel one-pot synthesis from substituted 3-amino-1 H-benzo[f]chromene-2-carbonitrile derivatives and cyclohexanone in DMF in the catalyst of anhydrous zinc chloride under reflux.A plausible mechanism was proposed.     

Benzylation of Aromatic Compounds with Benzyl Chloride Catalyzed by Nafion/SiO_2 Nanocomposite Catalyst

Diphenylmethane and substituted diphenylmethane are important compounds forsynthesis chemistry as well as industrial chemistry. These compounds are easilysynthesized by the benzylation of aromatic compounds with benzyl chloride or benzylalcohol catalyzed by homogeneous acid catalysts, such as AlCl3, FeCl3, H2SO4, HF andBF3. However, these catalytic systems are highly corrosive, and usually proceed withlow selectivity. In addition, they are less satisfactory from the environmen…     

A Novel Synthesis of (-)-10-epi-α-Cyperone

The eudesmane derivative, (-)-10-epi-α-cyperone 1, is widely used as a chiral starting material for the synthesis of other fused-ring sesquiterpenes1. The first synthetic work was reported by Howe and co-workers via condensation of (+)-dihydrocarvone 2 with 1-diethylaminopentan-3-one methiodide in 32% yield2. Previously, our group reported the synthesis of compound 1 by treating ketone 2 with ethyl vinyl ketone (EVK) directly under different conditions1a, but the yields were not satisfacto…     

First Total Synthesis of (±)-Aiphanol

Aiphanol was isolated from the seeds of Aiphanes aculeate Willd. (Arecaceae) collected in Peru and was reported to exhibit significant inhibitory activities against cyclooxyge- nases-1 and -2. The structure of aiphanol was elucidated by spectroscopic methods as an unprecedented stilbenolignan skeleton in which a stilbene moiety is linked to a phenylpropane unit through a dioxane bridge1. In our previous works the synthetic approach to 1,4-benzodioxane lignans were achieved2. Since aiphanol…     

Formation of α,α''''-Bis(substituted benzylidene)cycloalkanones from Masked Aldehydes Promoted by Samarium(III) Triiodide

~~Formation of α,α'-Bis(substituted benzylidene)cycloalkanones from Masked Aldehydes Promoted by Samarium(III) Triiodide~~     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c)有关;高温吸热峰(峰温T_m)较大,几乎不受T_n的影响。T′_m的出现与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。