Gain of harmonic generation in high gain free electron laser

In a planar undulator employed free electron laser (FEL), each harmonic radiation starts from linear amplification and ends with nonlinear harmonic interactions of the lower nonlinear harmonics and the fundamental radiation. In this paper, we investigate the harmonic generation based on the dispersion relation driven from the coupled Maxwell-Vlasov equations, taking into account the effects due to energy spread, emittance, betatron oscillation of electron beam as well as diffraction guiding of the radiation field. A 3D universal scaling function for gain of the linear harmonic generation and a 1D universal scaling function for gain of the nonlinear harmonic generation are presented, which promise rapid computation in FEL design and optimization. The analytical approaches have been validated by 3D simulation results in large range.     

Simulation of Phase-Change Random Access Memory with Ring-Type Contactor for Low Reset Current by Finite Element Modelling

A three-dimensional finite element models for phase change random access memory （PCRAM） is established to simulate thermal and electrical behaviours during RESET operation. The RESET behaviours of the conventional structure （CS） and the ring-type contact in bottom electrode （RIB） are compared with each other. The simulation results indicate that the RIB cell has advantages of high heat efficiency for melting phase change material in cell, reduction of contact area and lower RESET current with maintaining good resistance contrast. The RESET current decreases from 1.26mA to 1.2mA and the heat consumption in CST material during programming increases from 12% to 37% in RIB structure. Thus the RIB structure PCRAM cell is suitable for future device with high heat efficiency and smaller RESET current.     

Characteristics of Nd:YGG Laser Operating at 4F3/2-4I9/2

The laser properties of the Nd：YGG crystal are investigated. The absorption spectrum from 500 to 90Onto and emission spectrum from 850 to 1400nm of Nd：YGG are measured. As much as 1.35 W output power of fundamental laser operating at 935 and 938nm with a slope efficiency of 15.7% and 105mW output power of frequency doubled blue laser are successfully obtained.     

顶空固相微萃取-气相色谱-质谱法测定软木塞中愈创木酚的含量北大核心CSCD

取磨碎的软木塞样品0.500 0g,用水超声提取30min,取提取液9mL置于萃取瓶中,加入1.8g Na2SO4,于55℃进行固相微萃取35min后,于气相色谱仪进样口解吸7min,采用气相色谱-质谱法测定其中愈创木酚的含量。结果表明:愈创木酚在25.00～2 000μg·L-1内与其峰面积呈线性关系,检出限(3S/N)为0.022μg·L-1,按标准加入法进行回收试验,回收率为69.8%～115%,测定值的相对标准偏差(n=6)为6.3%～13%。     

自动快速燃烧炉-离子色谱法测定煤炭中氯北大核心CSCD

采用自动快速燃烧炉-离子色谱法测定煤炭中氯的含量。优化的试验条件如下:(1)燃烧管进口温度为950℃,出口温度为1 050℃;(2)称样量为10 mg;(3)以4.5 mmol·L^(-1)碳酸钠-1.4mmol·L^(-1)碳酸氢钠混合液为吸收液。以阴离子色谱柱为分离柱,4.5 mmol·L^(-1)碳酸钠-1.4mmol·L^(-1)碳酸氢钠混合液为淋洗液,抑制型电导检测器测定。以PO_4^(3-)作为内标物,氯的线性范围为0.5~20μg·L^(-1),检出限(3S/N)为0.086mg·L^(-1)。方法应用于煤炭标准物质和实际样品的分析,测定值与认定值相符,测定值与国家标准方法的测定结果相符,测定值的相对标准偏差(n=6)为2.4%~7.5%。     

Zinc Porphyrin Sensitizers Containing Different Withdrawing and Donating Groups for Dye-sensitized Solar Cells: Design,Synthesis and Photovoltaic Properties

In this work, a series of unsymmetrical push-pull type zinc-porphyrins, in which meso-substituted porphyrin core bears an electron-donating group and an electron-withdrawing group in the trans positions, have been designed and synthesized to improve the light-harvesting in dye-sensitized solar cells(DSSCs). The electronic structures of these zinc-porphyrin dyes were firstly screened by using density functional theory(DFT) and time-dependent density functional theory(TDDFT) calculations. Among these zinc-porphyrin derivatives, zinc porphyrins bearing a phenyl, diphenyl-benzenamine or 3-nitro-benzoic acid substituent, denoted D1, D2 or D3, respectively, are found to exhibit superior HOMO and LUMO locations which are suitable for DSSCs systems. In particular, the η value of the DSSCs(D2) improved up to 2.3 times when compared with reference cell(D1) on account of the increase of Jsc, FF and Voc. The enhancement of cell performance arises from the effective charge separation and decreases the aggregation of porphyrin dyes.     

一个锰的二维配位聚合物的合成及其性质

本文用2-咪唑乙酸(Hiaa),2,2′-联吡啶,氢氧化钠和六水合高氯酸锰在水和乙醇中反应合成了1个二维配位化合物{[Mn(iaa)(2,2′-bipyridine)(H₂O)](ClO₄)}_n (1)。单晶结构表明化合物1是1个新颖的二维双核锰配位聚合物,锰离子的配位构型为扭曲的八面体。每一个锰离子与3个配体配位,而每个配体与3个锰离子桥连。磁性研究表明1中Mn(Ⅱ)离子间存在弱的反     

液冷薄片构型激光器及其热管理技术

为了解决增益介质的热效应问题,提出了一种浸没式构型液冷激光器方案,该构型激光器在10Hz重复抽运频率下,获得了615mJ的能量输出,光光转换效率为21%,斜率效率为23%.基于流体力学和热力学原理,建立了激光器增益区流场的热-流-固耦合模型,利用软件模拟和有限元分析法,研究了在不同流速、泵浦功率条件下,整个增益区的温度场、速度场的分布特性;并基于增益区温度场的分布,分析了液冷条件下通过增益区的激光波前畸变特性.结果表明,增益介质的最大光程差为0.7666λ,冷却液最大光程差为-4.7331λ,说明该构型激光器有着良好的热管理性能.     

表面活性剂存在下铽-镥(钆、钇)-乙酰水杨酸共发荧光体系的研究

本文研究了镥等三种稀土离子与铽-乙酰水杨酸配合物产生的共发荧光效应。在最佳条件下,Lu³⁺、Gd³⁺、Y³⁺的存在可使铽-乙酰水杨酸配合物的荧光分别增强108,58和73倍。讨论了共发光体系的形成条件和荧光特性。利用Tb-Lu-乙酰水杨酸体系和Tb-Lu-乙酰水杨酸-乙二胺四乙酸-十六烷基三甲基溴化铵体系分析了合成稀土样品和包头稀土标准氧化物中的铽,结果满意,加标回收率为90.5～105.6%,并对共发光的机理和表面活性剂的作用进行了初步探讨。     

NH4^＋改型钾丝光沸石及其离子交换性

用铵盐改型钾丝光沸石,通过Ｘ－射线衍射,红外分析,分配系数,离子交换等温线及交换容量等的测定,就其结构及交换性能进行了研究;并与铵改型钠丝光沸石和天然斜发沸石等进行比较,表明ＮＨ４＾＋改型后的钾丝光沸石对Ｋ＾＋具有较高的交换容量和较好的Ｋ＾＋／Ｎａ＾＋分离效果。