孔洞形状对围岩极限承载能力影响的分析

为了研究工程岩体的宏观力学性能,采用数值模拟的方法研究了椭圆形孔洞形状对岩块极限承载能力的影响,找出了孔洞形状与极限承载能力之间的关系,同时研究了岩块声发射随着孔洞形状的变化规律。证明了应用数值模拟方法研究岩块的极限承载能力是研究工程岩体宏观力学参数特别是极限承载能力的有效方法。     

侧基可脱除共轭聚合物的合成及其在光电探测器中的应用

通过在吡咯并吡咯二酮(DPP)中引入热可脱去的叔丁氧羰基(Boc)基团,合成了一种新型的给-受体共轭聚合物P1.聚合物P1的溶解性研究表明,其在常见的有机溶剂(如四氢呋喃、甲苯、氯仿等)中均具有良好的溶解性,可进行溶液加工.热失重及红外光谱研究表明,P1可在适当的温度下退火实现Boc基团的脱除,形成不可溶聚合物P2.聚合物P1薄膜的最大吸收波长为829 nm,最高占据分子轨道(HOMO)能级与最低未占分子轨道(LUMO)能级分别为-5.25和-3.62 e V,将其作为活性层制备的光电探测器最大归一化探测率为8.20×10¹¹Jones.聚合物P2薄膜的最大吸收波长为771 nm,HOMO能级与LUMO能级分别为-5.30和-3.54 e V,将其作为空穴传输层制备的光电探测器暗电流密度为3.84×10^-9A/cm²,最大归一化探测率为3.96×10¹²Jones.研究结果为共轭聚合物分子的结构设计与光电探测器性能的改善提供了新的思路.     

沉淀pH值对SAPO-34/CZA复合催化剂物化性质及CO2加氢反应影响

研究了液相沉淀包覆工艺终点pH值对SAPO-34/CZA复合催化剂物化性质和CO2氢还原制低碳烯烃催化性能的影响.借助XRD、SEM、BET、NH3-TPD和CO2-TPD等手段对不同复合催化剂的晶相组成、微观形貌、孔结构及表面酸碱性质进行了分析表征.研究结果表明,沉淀pH值对SAPO-34/CZA复合催化剂物化性质和CO2加氢制低碳烯烃催化性能影响较大.过高或过低的沉淀pH值制得复合催化剂中SAPO-34分子筛结晶度、微孔比表面积及表面碱量均有所下降,呈现以介孔为主的孔结构特征;而当pH值为7时,制得复合催化剂形成了包覆相结构和微-介复合孔结构(微孔比表面积53.1 m2·g-1,介孔比表面积59.8 m2·g-1,总比表面积为112.9 m2·g-1,总孔容0.4 cm3·g-1,平均孔径14.6 nm);在反应温度325℃,还原温度285℃,反应压力3.0 MPa,体积比H2:CO2=3.0,空速3500 mL·g-1·h-1反应条件下,CO2转化率为64.8;,低碳烯烃选择性为49.8;.与pH=9制得催化剂比较,CO2转化率和低碳烯烃选择性分别提高了26.2;和19.2;.     

SEGREGATED VECTOR SOLUTIONS FOR NONLINEAR SCHR?DINGER SYSTEMS IN R~2

We study the following nonlinear Schrodinger system where P(τ) and Q(τ) are positive radial functions,μ 0,v 0,and β∈ R is a coupling constant.This type of system arises,particularly,in models in Bose-Einstein condensates theory.Applying a finite reduction method,we construct an unbounded sequence of nonradial positive vector solutions of segregated type when β is in some suitable interval,which gives an answer to an interesting problem raised by Peng and Wang in Remark 4.1(Arch.Ration.Mech.Anal.,208(2013),305-339).     

近红外传感器在无线遥控计数系统中的应用

利用反射式近红外传感器、无线电收/发模块及四合一功能组合计数集成电路等器件,研究了无线遥控红外线计数器。当有产品通过红外线检测区域时,就会有一部分红外光信号经产品反射回来,被与红外线发射管同排安装的光敏接收管收到并转换成同频率的电信号,再经红外传感器模块内电路进行放大、比较处理,输出高电平信号,启动发射机工作。接收机收到发射机发来的无线遥控编码信号后,再经解调、解码电路处理,输出编码脉冲,对此脉冲信号进行计数,就实现了对产品的统计。整个系统为模块化结构,具有安装容易、抗震能力强、传输距离远、工作稳定、计数准确、高亮度数字显示等特点。可用于重工业、轻纺工业、食品工业、农牧业一些设备或流水线上对产量或流量进行遥控计数。     

预平衡裂变

实验证明,重离子熔合裂变与入射道的质量不对称有关,说明对于某些反应体系,熔合形成的复合体系,裂变时未忘记其形成的历史.在实验观察的基础上,我们提出了预平衡裂变模型,解释了重离子垒下熔合裂变碎片角分布各向异性异常.     

Experimental investigation on wake profile detection based on laser scattering by bubbles

The optical system for detecting wake profiles based on laser backscattering by bubbles at 180°is reported, in which the monostatic optical geometry is adopted and the power density estimation is used to process bubble scattering signal.The profiles of wakes produced by a two-blade propeller with a diameter of 46 mm at 6000 and 8000 rpm are measured using this system.It is shown that the wake region can be identified,the wake with different shapes can be distinguished,and the fine structure within wakes can be detected.Also,the repeatability of the results is tested experimentally.Results show the feasibility of this system in wake profile detection.     

High power pulse amplification of ytterbium-doped double-clad fiber amplifier

By solving a set of time-dependent equations,the characteristics of the ytterbium-doped double-clad fiber amplifier are presented.Besides the steady state in the fiber of the upper-state population,pump power and amplified spontaneous emission without the input signal,the dynamic characteristics of the high power Gaussian pulse amplification like the evolution of pulse waveform distortion,upper-state population distribution and stored energy and pulse energy of the amplifier under the forward and backward pump, are simulated.The relations between the output pulse energy of the amplifier and the different input pulse peak power or pump power are also discussed.The models and results can provide important guide for the design and optimization of the high power pulse amplification.