1,3-二烷氧基-乙酰丙酮和-丙酮的[1,3] 键迁移重排

1,3-二甲氧基-2-吗啉-N-基戊1-烯-4-酮(11a)的酸水解经证实发生部分重排, 生成1,3-(1a)和1,5-二甲氧基乙酰丙酮(2a)的混合物, 并通过与氰基乙酰胺缩合, 分别形成3-氰基-4-甲氧甲基-5-甲氧基-6-甲基吡啶-2-醇(3a)和3-氰基-4,6-双(甲氧甲基)吡啶-2-醇(4a)加以证实, 前者还转化为维生素B6. 在相应的乙氧基序列中, 除得到1b丶2b丶3b和4b外, 还分离了反向缩合产物3-氰基-4-甲基-5-乙氧基-6-乙氧甲基吡啶-2-醇(5b) . 对Fedoronko 等为1,3-二甲氧基丙酮的重排-水解为丙酮醛提出的烯丙型重排机制提出了质疑. 事实上, 这一重排更可能是一利热过程的[1.3]单键迁移过程和提供了支持的事例.     

PERFORMANCE COMPARISON OF THE NEON-LIKE CHROMIUM SOFT X-RAY LASING DRIVEN BY A DOUBLE LASER PULSE WITH DIFFERENT DURATION

A comparison has been made of performance of the neon-like chromium soft X-ray lasing at 28.5 nm driven by a double 900 ps pulse at 6 TW/cm², with that driven by a double 200 ps pulse at similar irradiance. The double 200 ps pulse has been found to be much more efficient to drive X-ray lasing with higher intensity.     

Impact of cavitation on lesion formation induced by high intensity focused ultrasound

High intensity focused ultrasound(HIFU) has shown a great promise in noninvasive cancer therapy. The impact of acoustic cavitation on the lesion formation induced by HIFU is investigated both experimentally and theoretically in transparent protein-containing gel and ex vivo liver tissue samples. A numerical model that accounts for nonlinear acoustic propagation and heat transfer is used to simulate the lesion formation induced by the thermal effect. The results showed that lesions could be induced in the samples exposed to HIFU with various acoustic pressures and pulse lengths. The measured areas of lesions formed in the lateral direction were comparable to the simulated results, while much larger discrepancy was observed between the experimental and simulated data for the areas of longitudinal lesion cross-section. Meanwhile,a series of stripe-wiped-off B-mode pictures were obtained by using a special imaging processing method so that HIFUinduced cavitation bubble activities could be monitored in real-time and quantitatively analyzed as the functions of acoustic pressure and pulse length. The results indicated that, unlike the lateral area of HIFU-induced lesion that was less affected by the cavitation activity, the longitudinal cross-section of HIFU-induced lesion was significantly influenced by the generation of cavitation bubbles through the temperature elevation resulting from HIFU exposures. Therefore, considering the clinical safety in HIFU treatments, more attention should be paid on the lesion formation in the longitudinal direction to avoid uncontrollable variation resulting from HIFU-induced cavitation activity.     

X射线荧光光谱法同时测定涂料中的铅、铬、硒和钴

提出了用X射线荧光光谱法同时测定涂料中有害重金属铅、铬、硒和钴的一种新的测试方法. 考察了样品量不同和样品粒度不同对待测元素测试结果的影响. 选用不含待测元素的新鲜涂料作为基体物质制备标准样品, 较好地消除了基体的影响. 各待测元素在50～1000 mg/kg的范围内, 均呈线性关系;Pb、 Cr、 Se、 Co的检出限分别为3.6、 1.2、 0.5及1.5 mg/kg;方法精密度和仪器精密度的相对标准偏差分别低于1.3%和0.50%;用于实际样品测得的结果与电感耦合等离子体原子发射光谱法法测得的结果基本一致.     

Synthesis and characterization of diblock copolymer of butadiene and 2-ethyl-2-oxazoline

Ｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓａｓｉｄｅａｌｃｏｍｐａｔｉｂｉｌｉｚｅｒｓｈａｖｅｆｏｕｎｄｗｉｄｅａｐｐｌｉｃａｔｉｏｎｓｉｎｐｏｌｙｍｅｒｂｌｅｎｄｓ.Ｆｏｒｂｌｏｃｋｃｏｐｏｌｙｍｅｒｓｃｏｎｔａｉｎｉｎｇｐｏｌａｒｂｌｏｃｋｓ,ｉｔｓａｄｄｉｔｉｏｎｔｏａｂｌｅｎｄｃｏｎｔａｉｎｉｎｇｐｏｌａｒｃｏｍｐｏｎｅｎｔｓｌｅａｄｓｔｏｔｈｅｄｅｃｒｅａｓｅｉｎｉｎｔｅｒｆａｃｉａｌｔｅｎｓｉｏｎｂｅｔｗｅｅｎｔｈｅｉｍｍｉｓｃｉｂｌｅｐｈａｓｅｓｏｆｔｈｅｂｌｅｎｄ,ｔｈｅｉｎｃｒｅａｓｅｉｎｃ…     

聚环氧乙烷/聚乙基■唑啉共混体系结晶行为及相容性的研究

用偏光显微镜（ＰＬＭ）、ＤＳＣ、ＩＲ和ＷＡＸＤ等测试方法对聚环氧乙烷（ＰＥＯ）／聚乙基唑啉（ＰＥＯｘ）共混体系结晶行为及相容性进行了研究．结果表明，ＰＥＯ含量在３０％以上的共混体系中，几乎完全被球晶充满，非晶态ＰＥＯｘ作为微区分散在大球晶之间或之中；含量为２０％的共混体系照片上呈树枝状晶；含量低于１０％时则看不到结晶出现，体系形成单一的非晶相．对任何组成的共混物，均只出现单一的玻璃化转变温度（Ｔｇ），而且符合Ｆｏｘ方程揭示的规律；随ＰＥＯｘ组分含量的增加，共混体系的结晶度减小，熔点下降，并利用平衡熔点方程计算出ＰＥＯ与ＰＥＯｘ的相互作用能密度．非晶ＰＥＯ与ＰＥＯｘ热力学相容，其相容性是由于这两种分子间存在着特殊相互作用．ＰＥＯｘ的加入不会改变ＰＥＯ的晶胞参数．     

软X射线多层膜反射镜反射率测量

采用线状激光等离子体作为软X光源,用具有空间分辨的掠入射光栅谱仪对正入射多层膜反射镜进行了反射率测量。谱仪测谱范围20~40nm,谱分辨0.05nm,测得50层C/Al反射镜在中心波长28.6nm处反射率为22%,带宽约为2.5nm。     

Pellet Enhanced Performance on the HL-2A Tokamak

Enhanced confinement has been achieved by the centre fuelling of pellet injection on the HL-2A tokamak. The energy confinement time increases from 50ms to 140ms after the pellet injection. Experimental results show that the improvement of the confinement is related to the decrease of the electron heat transport. Several phenomena which may lead to the improved confinement have been observed in the experiments. After the pellet injection the hollow electron temperature profile and the peaked electron density profile can be sustained for about 200ms, but the improved confinement remains at about 500ms. Sawtooth features and MHD modes have been observed by soft x-ray array and the Mirnov probes. The weak （or reversed） magnetic shear is thought to be an important cause of the low electron heat transport.     

酚氧树脂/聚(4-乙烯基吡啶)高分子复合物的制备及表征

采用元素分析、DSC、FTIR、紫外光谱及XPS等手段对酚氧树脂和聚(4-乙烯基吡啶)在氯仿中溶液共混形成的高分子复合物的组成及结构进行了研究,并与相应的共混物作了比较。结果表明,所得的各复合物的组成相同,其值与组分分子中的链节等摩尔比一致;而共混物也为相容体系,其组成与两高分子组分的投料比对应。基于实验结果,揭示了复合物的形成过程。     

Yb∶YAG超快闪烁晶体研究进展与展望

Yb3+离子掺杂YAG晶体(Yb∶YAG)作为一种性能优良的激光晶体已广泛应用于高效、高功率激光领域。最新研究表明,Yb∶YAG晶体响应时间可达0.411 ns,其优良的超快闪烁特性在超快脉冲辐射探测、惯性约束核聚变、空间辐射探测、核反应动力学等领域的应用引起了广泛关注,使得Yb∶YAG晶体成为超快闪烁材料研究的热点。关于Yb∶YAG的闪烁特性,文章在系统介绍Yb∶YAG作为超快闪烁晶体研究进展和发光机理的基础上,归纳总结了掺杂种类、浓度、后处理工艺、辐照、格位尺寸大小、温度等对Yb∶YAG晶体闪烁性能的影响。然后,针对Yb∶YAG目前存在的问题,给出相应的解释并提出通过离子共掺调控来改善其闪烁性能的方法。最后,对Yb∶YAG超快闪烁晶体未来的发展方向进行了展望。