An Infrared Spectroscopic Study on the Hofmann-diam-type 1,12-Diaminododecanemetal(II) Tetracyanonickelate(II)-aromatic Guest Clathrates: M(H2N(CH2)12NH2)Ni(CN)4ċG(M=Co, Ni or Cd; G = Benzene, Naphthalene, Anthracene, Phenanthrene or Biphenyl)

Three Hofmann-diaminododecane-type clathrates of the form M(1,12-diaminododecane) Ni(CN)₄G (M = Co, Ni or Cd; G = benzene, naphthalene, anthracene, phenanthrene or biphenyl) have been prepared in powder form. The 1,12-diaminododecane molecules in the host lattice permit the inclusion of bulky guest molecules. The spectral features suggest that these compounds are similar in structure to the other Hofmann-diam-type clathrates.     

Peak area determination and energy dependence of gamma- and X-ray peak tailing

Two analytical shape functions representing the shapes of - and characteristic X-ray photopeak sides obtained with a Ge(Li) detector are described. The photopeak centroid is accurately determined by using these functions. Energy dependence of photopeak tailing at the lower energy side of the photopeaks are obtained by the least-squares fitting method. The present method can be used for the analysis of partly overlapped photopeaks, one side of which is well resolved, with a sufficient accuracy.     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

Measurement of L&agr; and Lß X-ray fluorescence cross sections in Er, Ta, W and Au by 16.896–59.543 keV photons

La and Lb X-ray fluorescence cross sections in Er, Ta, W and Au at excitation energies of 16.896, 22.581, 25.770, 32.890, 38.184, 43.949, 50.214 and 59.5 keV were investigated. Measurements were made using a low energy Si(Li) detector coupled to a model 4096 computerized multi-channel analyser. The experimental results were compared with the theoretically calculated values of L X-rays fluorescence cross sections and other experimental results. Good agreement was observed between experimental and theoretical values.     

Quantum calculations of vibrational harmonic energy transfer in collinear collisions of X2Y2 + A and X2Y2 + A2

Quantum calculations of translational-vibrational energy transfer in atom-four-atom and diatom-four-atom collinear collisions are reported. Energy transfer shows a strong dependence on the reduced mass of the collision system and on whether the incoming particle is an atom or a molecule. Atom-molecule collisions are more efficient for energy transfer purposes.     

Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

Der Abbau des Insektizides GS 13005 in der Ratte. Strukturaufklärung der wichtigsten Metabolite [1]

The structures of the essential metabolites which are excreted by the rat after oral application of GS 13005 (O,O-dimethyl-S-[(2-methoxy-1,3,4-thiadiazole-5(4H)-one-4-yl)-methyl] dithiophosphate) have been elucidated. The product of final oxidation, CO₂, was found to be the main metabolite (up to 36% of the dose applied). Among the degradation products excreted in the urine (up to 45% of the dose applied) the two most important were isolated. They are 4-methylsulfinylmethyl and 4-methylsulfonylmethyl derivatives respectively of the intact 2-methoxy-1,3,4-thiadiazole-5-one heterocycle (metabolites III and II, in amounts of 20–25% and 5–7% of the dose applied, respectively). These metabolites originate by methylation and subsequent oxidation from the mercaptomethyl derivative liberated after hydrolysis of the P S bond of the dithiophosphoric acid ester.     

The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.