Thermal properties of flame retardant viscose fibers

This paper discusses the problem of the thermal properties of flame retarding additives based on phosphazene derivatives and of the commercial agents TomflamB, FlammexT23P and StockhausenW-20949, as well as of flame resistant viscose fibers containing the above agents. Results of this investigation showed the action of FlammexT23P, StockhausenW-20949 and phosphazene derivatives at lower temperature. TomflamB acted within a much wider range of temperatures. The flame retardant additives applied to viscose fibers change the thermal properties of the fiber material.     

Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

Synthesis and derivatization of daptomycin: a chemoenzymatic route to acidic lipopeptide antibiotics

Daptomycin is a branched cyclic nonribosomally assembled acidic lipopeptide, which is the first clinically approved antibiotic of this class. Here we show that the recombinant cyclization domain of the Streptomyces coelicolor calcium-dependent antibiotic (CDA) nonribosomal peptide synthetase (NRPS) is a versatile tool for the chemoenzymatic generation of daptomycin derivatives. Linear CDA undecapeptide thioesters with single exchanges at six daptomycin-specific residues were successfully cyclized by CDA cyclase. Simultaneous incorporation of all six of these residues into the peptide backbone and elongation of the N-terminus of CDA by two residues yielded a daptomycin derivative that lacked only the beta-methyl group of l-3-methylglutamate. Bioactivity studies with several substrate analogues revealed a significant role of nonproteinogenic constituents for antibacterial potency. In accordance with acidic lipopeptides, the bioactivity of the chemoenzymatic assembled daptomycin analogue is dependent on the concentration of calcium ions. Single deletions of the four acidic residues in the peptide backbone suggest that only two aspartic acid residues are essential for antimicrobial potency. These two residues are strictly conserved among other nonribosomal acidic lipopeptides and the EF-motif of ribosomally assembled calmodulin. Based on these findings CDA cyclase is a versatile catalyst that can be used to generate novel daptomycin derivatives that are otherwise difficult to obtain by chemical modification of the parental tridecapeptide to improve further its therapeutic activity.     

Effect of protonation exothermicity on the chemical ionization mass spectra of some alkylbenzenes

The H₂, N₂/H₂, CO₂/H₂, N₂O/H₂, CO/H₂ and CH₄ chemical ionization mass spectra of thirteen C₈ to C₁₁ alkylbenzenes are reported. Characteristic hydride and alkide ion abstraction reactions are observed with all reagent gases. The major fragmentation reactions of [MH]⁺ are olefin elimination to form a protonated arene and arene elimination to form an alkyl ion. From the effect of structure and protonation exothermicity it is concluded that rearrangement of primary alkyl groups to the more stable secondary or tertiary structure occurs prior to alkyl ion formation. A detailed fragmentation mechanism for protonated arenes is proposed. The ‘effective’ proton affinity of the methane-derived reagent system is estimated to be ～556 kJ mol^?1.     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

Capillary isoelectric focusing-mass spectrometry for shotgun approach in proteomics

We report on capillary isoelectric focusing-mass spectrometry (CIEF-MS) of complex peptide mixtures in the absence of carrier ampholytes. Furthermore, the use of low concentrations of carrier ampholytes as mere spacers is investigated. Carrier ampholytes are complex mixtures of amphoteric compounds with high buffering capacity. Since all peptides are amphoteric compounds by themselves, the use of carrier ampholytes may be superfluous to establish a stable pH gradient in CIEF analysis of protein digests. Our research showed that when carrier ampholytes are omitted, the analyte ions are not focused at their isoelectric point. The analytes are charged, leading to electrophoretic mobility uncharacteristic for CIEF. The method was tested for a five-protein-mixture at 0.02 mg/mL per protein and 0.05 mg/mL per protein. At the lower concentration, the analytes were stacked during the focusing process in only a limited length of the capillary. Therefore, the higher concentration led to better separation efficiency. It was found that at low concentration (0.20%) the carrier ampholytes could work as spacers. Though it led to sensitivity losses of 15-45%, this was compensated by the higher separation efficiencies seen. The method was evaluated with an eight-protein-mixture, of which all could be identified after performing MS/MS.     

On distribution of molecular weight in anionic polymerizates of caprolactam

Measurement has been made of the dependence of the molecular weight distribution on the ratio of the catalytic system components and on the polymerization time for polycaprolactam obtained by anionic polymerization. A bimodal character of the curves was observed for products made using molar ratios of activator (N-benzoylcaprolactam) to initiator (sodium dihydro-bis(methoxyethoxy)aluminate) of 1:1 and 1:3, when the polymerization times were less than 1 hr. This course is explained by the influence of fast side-reactions, mainly condensations. For a ratio of 3:1 of the components of the catalytic system, smooth integral distribution curves are obtained, accounting for a very fast decrease in the strong base concentration in the initial stages of the polymerization.     

REALISIS: a medicinal chemistry-oriented reagent selection, library design, and profiling platform

REALISIS is a software system for reagent selection, library design, and profiling, developed to fit the workflow of bench chemists and medicinal chemists. Designed to be portable, the software offers a comprehensive graphical user interface and rapid, integrated functionalities required for reagent retrieval and filtering, product enumeration, and library profiling. REALISIS is component-based, consisting of four main modules: reagent searching; reagent filtering; library enumeration; and library profiling. Each module allows the chemist to access specific functionalities and diverse filtering and profiling mechanisms. By implementing the entire process of reagent selection, library design, and profiling and by integrating all the necessary functionalities for this process, REALISIS cuts the time required to design combinatorial and noncombinatorial libraries from several days to a few hours.     

Application of High Pressure-DTA for High Pressure-liquid Phase Epitaxy of Doped Mercury and Thallium HTS Formations

The fabrication method of superconducting thin films of compositions HgBa₂Ca₂Cu₃O_8+δ (Hg-1223) and Tl₂Ba₂CuO_y (2201) on single-crystalline SrTiO₃ and LaAlO₃ substrates is reported. The highest obtained T _c was 134 K and J _c over 10⁶ A cm^–2 at 77 K. High pressure DTA(HP-DTA) was applied to grow mercury- and thallium-based high-temperature superconducting crystals and thin films, to identify melting points of particular phases within these oxide systems and determine suitable processing conditions. The DTA system operates at the: maximum temperature of 1200°C, volume up to 5 cm³, working pressure up to 1.5 GPa and at a working atmosphere — inert gas with up to 25% oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

Organo-noble-gas hydride compounds HKrCCH, HXeCCH, HXeCC, and HXeCCXeH: formation mechanisms and effect of 13C isotope substitution on the vibrational properties

We investigate the formation mechanism of HXeCCXeH in a Xe matrix. Our experimental results show that the HXeCCXeH molecules are formed in the secondary reactions involving HXeCC radicals. The experimental data on the formation of HXeCCXeH is fully explained based on the model involving the HXeCC+Xe+H-->HXeCCXeH reaction. This reaction is the first case when a noble-gas hydride molecule is formed from another noble-gas molecule. In addition, we investigate the (12)C/(13)C isotope effect on the vibrational properties of organo-noble-gas hydrides (HKrCCH, HXeCCH, HXeCC, and HXeCCXeH) in noble-gas matrixes. The present experimental results and ab initio calculations on carbon isotope shifts of the vibrational modes support the previous assignments of these molecules. Upon (12)C to (13)C isotope substitution, we observed a pronounced effect on the H-Kr stretching mode of HKrCCH (downshift of 1.0-3.6 cm(-1), depending on the matrix site) and a small anomalous shift (+0.1 cm(-1)) of the H-Xe stretching mode of HXeCCH and HXeCCXeH.