Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Self-assembled peptide tubelets with 7 A pores

Here we report the preparation and structural characteristics of self-assembling peptide tubelets composed of 32-membered rings formed of alternating alpha-amino acids and cis-3-aminocyclohexanecarboxylic acids. The tubelets possess a partial hydrophobic core environment, provided by the projection of the cyclohexane C2 methylene moiety into the lumen, and a Van der Waals pore diameter of about 7 A.     

An Infrared Spectroscopic Study on the Hofmann- and en-Td-type Clathrates: Mn(NH3)2Zn(CN)4 .2benzene and Mn(ethylenediamine)Zn(CN)4.2benzene

Infrared spectra of Mn(NH₃)₂Zn(CN)₄.2C₆H₆ andMn(ethylenediamine)Zn(CN)₄.2C₆H₆ are reported. The spectral data suggest that these compounds are similar in structure toHofmann-T_d-type and the en-T_d-type clathrates,respectively. There is good evidence for H-bonding from ammoniaN–H to benzene as a to H-bond.     

Structural study of copper-nickel aluminate (CuxNi1−xAl2O4) spinels

CuAl₂O₄, NiAl₂O₄, and three ternary spinels Cu_xNi_1?xAl₂O₃ have been prepared, in polycrystalline form, by solid-state reaction of mixtures of CuO, NiO, and Al₂O₃ at 1223 K. X-Ray powder diffractometry, coupled with adequate computational methods, allowed determination of the unit-cell length, oxygen positional parameter, and cation distribution for each compound. Interdependence of these structural parameters is closely analyzed on the ternary oxide spinels. The one-electron difference between the Cu²⁺ and Ni²⁺ ions was found to be enough to render them distinguishable by X-ray powder diffraction.     

A microcomputer-based system for potentiometric measurements with ion-selective electrodes

A comparison, on completely equal terms, of a microcomputer-based system with manual measurements is described in detail. The main features compared are the precision and accuracy of the results and the number of determinations per time unit. The example used is a standard addition measurement of fluoride in toothpaste. The microcomputer system and its interfacing to the peripheral units are also described. The microcomputer system for control, supervision and evaluation of the measurements results in a significant gain in precision and speed. Accuracy requires the use of a non-theoretical value of the Nernstian slope. The memory effect of the ion-selective electrode is large when the type of sample is changed.     

CHEMILUMINESCENCE FROM THE OXIDATION OF AUXIN DERIVATIVES

Abstract— The thiophenyl ester of indole-3-acetic acid and indole-3-acetonitrile produce chemiluminescence in aerated dimethylsulfoxide in the presence of potassium t -butoxide. The emitter is the aromatic aldehyde. In the case of acetonitrile, the other product expected from the cleavage of an intermediate dioxetane, cyanate/isocyanate, has also been identified. Other auxins also chemiluminesce under similar conditions, but the emitters have not been properly identified.
These systems are models for the peroxidase catalyzed oxidation of indole-3-acetic acid to indole-3-carboxaldehyde and as such support the earlier inference (Vidigal et al , 1975) that the excited aldehyde is generated in the enzymic process.
An additional result is the observation of an exciplex between excited indole-3-carboxaldehyde and the thiophenylester of indole-3-acetic acid. This appears to be the first case of chemical generation of an exciplex by a route other than radical ion reaction, presumably by the dioxetane route.     

Unexpected ring transformation to pyrrolo[3.2-b]pyridine derivatives. Fused azolium salts. 22

2-Arylsulfanyl and 2-benzylsulfanylpyridinium N-arylimides (2) easily prepared from 3-aryltetrazolopyridinium salts (1) with aryl and benzylthiolates, respectively, reacted with various dipolarophiles yielding cycloadducts that underwent transformation to give tetrahydropyrrolo[3,2-b]pyridines (5, 6, and 8) in good yields. A similar rearrangement (formation of 15) was also observed in the case of parent derivatives being unsubstituted in position 2 (12). The abscence of any significant solvent effect, comparison of the sulfur and non-sulfur analogues, as well as the stereoselective nature of the observed ring transformation seem to support a sigmatropic mechanism. Structure elucidation of the products has been carried out by single-crystal X-ray diffraction and (1)H NMR experiments.     

Analysis of citrates and benzoates used in poly(vinyl chloride) by supercritical fluid extraction and gas chromatography

Supercritical fluid extraction (SFE) has been demonstrated to be a useful tool in the determination of additives in polymeric materials. This paper describes the determination of some citrates and benzoates in poly(vinyl chloride) blended with 33–34% of plasticizer using off-line SFE followed by gas chromatography. Experimental factors affecting SFE have been studied by gravimetric analysis, followed by analysis of the extracts using a gas chromatograph equipped with a flame ionization detector. The extraction process is governed by the solubility of the plasticizers in the supercritical fluid or by their diffusion through the polymer matrix, which depend on the pressure and temperature used. Maximum extraction (>99%) is obtained at pressures and temperatures higher than 40 MPa and 80 °C, respectively. Due to purge losses, the collection efficiency of plasticizers into a liquid solvent ranges from 85 to 90%. The applicability of the SFE method is demonstrated using real samples and comparing the results with those obtained by conventional Soxhlet extraction.