Hadronic equation of state and the onset of kaon condensation

An equation of state is presented which takes the finite size of baryons and of mesons consistently into account and incorporates the contributions of both nonstrange and strange hadrons. All extensive quantities (energy, particle number, entropy) are modified by a factor taking into account the excluded volume due to baryon repulsion. Intensive quantities (pressure) are not modified. This is achieved by introducing a baryon chemical potential, _B, which is shifted from its point-like value, _B ⁰ , by a term proportional to the finite volume of a hadron,V ₀, as follows: _B= _B ⁰ + V₀[P⁰(T, _B ⁰ )–P⁰(T, 0)], whereP ⁰ is the pressure for pointlike particles. The last term is necessary to conserve baryon number at the phase transition point. The differences between the new equation of state and those considered previously in the literature are discussed. It is shown that kaon condensation sets in only in the mixed phase of the transition, where hadrons, quarks and gluons are present simultaneously in thermodynamical equilibrium.     

A moment problem associated to rational Szegő functions

Leta ₁,...,a _p be distinct points in the finite complex plane ?, such that |a _j|>1,j=1,..., p and let \(b_j = 1/\bar \alpha _j ,\) j=1,..., p. Let μ₀, μ _π ^(j) , ν _π ^(j) j=1,..., p;n=1, 2,... be given complex numbers. We consider the following moment problem. Find a distribution ψ on [?π, π], with infinitely many points of increase, such that $$\begin{array}{l} \int_{ - \pi }^\pi {d\psi (\theta ) = \mu _0 ,} \\ \int_{ - \pi }^\pi {\frac{{d\psi (\theta )}}{{(e^{i\theta } - a_j )^n }} = \mu _n^{(j)} ,} \int_{ - \pi }^\pi {\frac{{d\psi (\theta )}}{{(e^{i\theta } - b_j )^n }} = v_n^{(j)} ,} j = 1,...,p;n = 1,2,.... \\ \end{array}$$ It will be shown that this problem has a unique solution if the moments generate a positive-definite Hermitian inner product on the linear space of rational functions with no poles in the extended complex plane ?^* outside {a ₁,...,a _p,b ₁,...,b _p}.     

Molecular structure and conformation of 2,3-dichloro-1-propene as determined by gas-phase electron diffraction

The molecular structure and conformation of 2,3-dichloro-1-propene have been determined by gas-phase electron diffraction at nozzle temperatures of 24, 90 and 273°C. The molecules exist as a mixture of two conformers with the chlorine atoms anti (torsion angle ∠φ = 0°) or gauche (∠φ = 109°) to each other and with the anti form the more stable. The composition (mole fraction) of the vapor with uncertainties estimated at 2σ was found to be 0.55 (0.08), 0.49 (0.08) and 0.41 (0.10) at 24, 90 and 273°, respectively. These values correspond to an energy difference with estimated standard deviation ΔE° = E°_g-E°_a = 0.7 ± 0.3 kcal mol^?1 and an entropy difference ΔS° = S°_g-S°_a = 0.6 ± 0.9 cal mol^?1 K^?1. Some of the diffraction results, together with spectroscopic observations, permit the evaluation of an approximate torsional potential function of the form 2V = V₁ (1 - cos φ) + V₂ (1 - cos 2φ) + V₃ (1 - cos 3φ); the results are V₁ = 4.4 ± 0.5, V₂ = ?2.9 ± 0.5 and V₃ = 4.8 ± 0.2, all in kcal mol^?1. The results at 24°C for the distance (r_a) and angle (∠_α) parameters, with estimated uncertainties of 2σ, are: r(C_sp²-H) = 1.098(0.020)Å, r(C_sp³-H) = 1.103(0.020)Å, r(CC) = 1.334(0.009)Å, r(C-C) = 1.504(0.013)Å, r(C_sp²-Cl) = 1.752(0.021)Å, r(C_sp³-Cl) = 1.776(0.020)Å, ∠C-CC = 127.6(1.1)°, ∠C_sp³-C_sp²-Cl = 110.2(1.0), ∠C_sp²-C_sp³-Cl = 113.1(1.2)°, ∠H-C_sp³-H = 109.5° (assumed), ∠CC-H = 120.0° (assumed) and ∠φ = 108.9(3.4)°.     

The charge delocalised beta,beta-carotene dication--preparation, structure elucidation by NMR and reactions with nucleophiles

The reaction between beta,beta-carotene and BF3-etherates has been investigated, leading to structural elucidation of the blue product, formed in appropriate organic solvents, as a symmetrical charge delocalised dication (lambda(max) 985 nm at room temperature in CHCl3) with considerable stability. The reaction, monitored by EPR studies at -25 degrees C, occurred via free radical intermediates. A C40H56BF3 intermediate was captured by EIMS. The detailed structure of the dication was established by COSY, HSQC, HMBC and 1D and 2D ROESY NMR techniques (600 MHz, CDCl3, -20 degrees C) leading to complete assignments of 1H and 13C chemical shifts and 3J(H,H) coupling constants. The effects of the two delocalised charges on chemical shift (charge distribution) and bond distance (3J(H,H)) were considered. The results are consistent with charge delocalisation mainly in the C-5-C-9 and C-5'-C-9' regions and with bond inversion to retro shifted double bonds in the central C-13-C-13' region. A convention for denoting the charge delocalisation and bond types is presented. The experimental results are discussed relative to previous theoretical calculations of the beta,beta-carotene dication structure. (All-E) and (15-Z)-beta,beta-carotene provided the same dication. The NIR spectra and stability of dications prepared in the same manner from the related carotenes 20,20'-dinor-beta,beta-carotene, heptapreno-beta,beta-carotene and nonapreno-beta,beta-carotene were examined for comparison. Reactions of the beta,beta-carotene dication with selected nucleophiles provided products including isocryptoxanthin, isocarotene and mutatochrome with H2O as nucleophile, and isocryptoxanthin methyl ether, 8-methoxy-7,8-dihydro-beta,beta-carotene and isocarotene with CH3ONa as nucleophile. The formation of these products is rationalised from the structure assigned to the dication.     

Electron capture dissociation Fourier transform ion cyclotron resonance mass spectrometry in the electron energy range 0-50 eV

Electron capture dissociation (ECD) of polypeptide cations was obtained with pencil and hollow electron beams for both sidekick and gas-assisted dynamic ion trapping (GADT) using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) with an electrostatic ion transfer line. Increasing the number of trapped ions by multiple ICR trap loads using GADT improved the ECD sensitivity in comparison with sidekick ion trapping and ECD efficiency in comparison with single ion trap load by GADT. Furthermore, enhanced sensitivity made it possible to observe ECD in a wide range of electron energies (0-50 eV). The degree, rate and fragmentation characteristics of ECD FTICR-MS were investigated as functions of electron energy, electron irradiation time, electron flux and ion trapping parameters for this broad energy range. The results obtained show that the rate of ECD is higher for more energetic (>1 eV) electrons. Long electron irradiation time with energetic electrons reduces average fragment ion mass and decreases efficiency of formation of c- and z-type ions. The obtained dependencies suggest that the average fragment ion mass and the ECD efficiency are functions of the total fluence of the electron beam (electron energy multiplied by irradiation time). The measured electron energy distributions in low-energy ECD and hot ECD regimes are about 1 eV at full width half maximum in employed experimental configurations.     

The effect of polymers on the phase behavior of balanced microemulsions: diblock-copolymer and comb-polymers

The effect of some amphipilic diblock-copolymers and comb-polymers on a balanced Winsor III microemulsion system is investigated with the quaternary system n-octyl-β-d-glucoside/1-octanol/n-octane/D₂O as basis system. The diblock-copolymers are polyethyleneoxide-co-polydodecenoxide (PEO _x PEDODO _y ) and polyethyleneoxide-co-polybutyleneoxide (PEO _x PEBU _y ), constituted of a straight chain hydrophilic part and a bulky hydrophobic part. Addition of the diblock-copolymer leads to an enhancement of the swelling of the middle phase by uptake of water and oil; a maximum boosting factor of 6 was obtained for PEO₁₁₁PEDODO₂₅. Nuclear magnetic resonance diffusometry yields the self-diffusion coefficients of all the components in the system. The diffusion experiments provide information on how the microstructure of the bicontinuous microemulsion changes upon addition of the polymers. The reduced self-diffusion coefficients of water and oil are sensitive to the type of polymer that is incorporated in the film. For the diblock-copolymers, as mainly used here, the reduced self-diffusion coefficient of oil and water will respond to how the polymer bends the film. When the film bends away from water, the reduced self-diffusion of the water will increase, whereas the oil diffusion will decrease due to the film acting as a barrier, hindering free diffusion. The self-diffusion coefficient of the polymer and surfactant are similar in magnitude and both decrease slightly with increasing polymer concentration.     

Polymer blends based on the β-modification of polypropylene

iPP/sPP, iPP/rPP, iPP/PVDF and iPP/PA-6 blends, and their β-nucleated forms were prepared in the present study. The components of iPP/sPP and iPP/rPP blends are compatible in the molten state. The phase structure of the melt of iPP/PVDF and iPP/PA-6 blends is heterogeneous. The melting and crystallisation characteristics as well as the structure and polymorphic composition of these blends were studied by polarised light microscopy (PLM) and differential scanning calorimetry (DSC). When semicrystalline polymers are added to iPP, the most important factor of the formation a blend with β-crystalline phase is the α-nucleation effect of the second polymer. In the case of polymers with an α-nucleating effect, the temperature range of their crystallisation should be lower than that of β-iPP. β-nucleated iPP/PVDF and iPP/PA-6 blends are extreme examples showing that completely β-iPP matrix can not form even in the presence of a highly effective β-nucleant, because of the strong α-nucleating ability and higher crystallisation temperature range of PVDF and PA-6. We found that the β-crystallisation tendency of random propylene copolymers can be enhanced by adding an iPP homopolymer.     

A neutron powder diffraction study of the κ phase in the FeWC system

The crystal structure of the κ-carbide in the FeWC system has been refined from neutron powder diffraction data using the Rietveld profile analysis method. κ-(FeWC) is isostructural with κ-(CoWC); space group $\text{P6}{}_3\text{mmc}$; unit cell dimensions a = 7.7982(2)Å, c = 7.8298(4) Å. The structure refinement indicates $\text{Fe}\text{W}$ substitution at two of the tungsten sites, and 46% vacancies at one of the carbon sites. The composition corresponds to the formula Fe_3+xW_10?xC_4?y, with x = 0.57(3) and y = 0.46(1).     

The use of polymeric amines to enhance the mechanical properties of lignocellulosic fibrous networks

Cationic polyelectrolytes (polyallylamine and polyvinylamine with different molecular masses) were adsorbed onto lignocellulosic fibres from unbleached and unbeaten spruce chemical fibres with different kappa numbers to investigate the effects on the mechanical properties of the final paper materials. Adsorption isotherms were first established to determine the maximum quantity of polymer that could be adsorbed onto each type of fibre. Paper sheets were then made with different amounts of added polyelectrolyte, and the structural and mechanical properties of the sheets were investigated, as well as the effect of an extra heating. The use of fibres with different kappa numbers led to different responses in terms of adsorption, and thus to differences in the mechanical properties of the resulting sheets. The tensile strength index was significantly increased (almost 50 % improvement in the best case) as a consequence of this polyelectrolyte adsorption onto the fibres, even at as low an adsorption level as 2 mg/g. The heating of paper sheets for 10 min at 160 °C was also shown to improve the tensile strength index by about 10 % for pulps with high kappa number.