Comparative studies of reactions of commercial polymers with molecular oxygen,singlet oxygen,atomic oxygen and ozone—I. Reactions with cis-1,4-polybutadiene

The oxidation of cis-1,4-polybutadiene by molecular oxygen, singlet oxygen, atomic oxygen and ozone has been studied using u.v. and i.r. spectroscopic methods. Some possible implications of the results of oxidation in the presence of singlet oxygen (parallel free radical oxidation) and atomic oxygen (formation of NO₂ and its reaction with polymer) are discussed. Chain scission was observed during all types of oxidation. A new mechanism involving opening of double bonds and formation of biradicals has been considered in detail.     

Electron capture dissociation of substance P using a commercially available Fourier transform ion cyclotron resonance mass spectrometer

Electron capture dissociation of the peptide Substance P is reported for the first time, with an unmodified, commercially available Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. The fragmentation pattern is compared with that obtained with collisionally induced dissociation of the ions in the electrospray ion source, and note that electron capture dissociation gives a more easily interpreted spectrum, showing mainly C-fragments. With the exception of the proline residues, which require cleavage of two chemical bonds, we observe all C-fragmental we find the bias voltage of the electron gun not to be very critical.     

Synthesis of 11C-amides using [11C]carbon monoxide and in situ activated amines by palladium-mediated carboxaminations

[11C]Carbon monoxide at low concentrations, aryl halides and amines were used in the palladium-mediated synthesis of twenty 11C-amides. In the study several approaches to improve the radiochemical yield were explored. Eight of the selected amides were prepared by in situ activation of the amines using lithium bis(trimethylsilyl)amide and the radiochemical yields of these reactions were improved compared to utilising a previous reported method. In the synthesis of 1-[carbonyl-11C]benzoyl-3-methyl-1H-indole (11) from 3-methyl-1H-indole (25), the corresponding organotin-amine was prepared prior to the acylation reaction. In a typical experiment, N-(4-hydroxyphenyl)[carbonyl-11C]acetamide (5) was prepared in 15% radiochemical yield using 4-aminophenol (20) but the yield increased to 63% when the amine was activated by lithium bis(trimethylsilyl)amide.     

Isotherms for adsorption of cellobiohydrolase I and II fromtrichoderma reesei on microcrystalline cellulose

Adsorption to microcrystalline cellulose (Avicel) of pure cellobiohydrolase I and II (CBH I and CBH II) fromTrichoderma reesei has been studied. Adsorption isotherms of the enzymes were measured at 4‡C using CBH I and CBH II alone and in reconstituted equimolar mixtures. Several models (Langmuir, Freundlich, Temkin, Jovanovic) were tested to describe the experimental adsorption isotherms. The isotherms did not follow the basic (one site) Langmuir equation that has often been used to describe adsorption isotherms of cellulases; correlation coefficients (R²) were only 0.926 and 0.947, for CBH I and II, respectively. The experimental isotherms were best described by a model of Langmuir type with two adsorption sites and by a combined Langmuir-Freundlich model (analogous to the Hill equation); using these models the correlation coefficients were in most cases higher than 0.995. Apparent binding parameters derived from the two sites Langmuir model indicated stronger binding of CBH II compared to CBH I; the distribution coefficients were 20.7 and 3.7 L/g for the two enzymes, respectively. The binding capacity, on the other hand, was higher for CBH I, 1.0 Μmol (67 mg) per gram Avicel, compared to 0.57 Μmol/g (30 mg/g) for CBH II. The isotherms when analyzed with the combined Langmuir-Freundlich model indicated presence of unequal binding sites on cellulose and/or negative cooperativity in the binding of the enzyme molecules.     

The determination of bromide in a local anaesthetic hydrochloride by capillary electrophoresis using direct UV detection

The determination of residual amounts of bromide in a local anaesthetic hydrochloride by capillary electrophoresis was developed. Direct UV detection at 200 nm was used for the determination of the bromide content. The separation capacity of the system must be sufficient when bromide is determined in the presence of a large excess of chloride since electromigration dispersion of the highly concentrated chloride peak may impair the resolution. The background electrolyte (BGE) contained both acetonitrile and methanesulphonic acid in order to improve the selectivity and minimise the electromigration dispersion. The system was optimised with respect to resolution of the chloride and the bromide peaks by statistical experimental design using a multivariate optimisation program. The developed method was validated in accordance with the ICH guidelines and proved to be suitable for its intended use.     

Synthesis and photophysics of one mononuclear Mn(III) and one dinuclear Mn(III,III) complex covalently linked to a ruthenium(II) tris(bipyridyl) complex

The preparation of donor (D)-photosensitizer (S) arrays, consisting of a manganese complex as D and a ruthenium tris(bipyridyl) complex as S has been pursued. Two new ruthenium complexes containing coordinating sites for one (2a) and two manganese ions (3a) were prepared in order to provide models for the donor side of photosystem II in green plants. The manganese coordinating site consists of bridging and terminal phenolate as well as terminal pyridyl ligands. The corresponding ruthenium-manganese complexes, a manganese monomer 2b and dimer 3b, were obtained. For the dimer 3b, our data suggest that intramolecular electron transfer from manganese to photogenerated ruthenium(III) is fast, k(ET) > 5 x 10(7) s(-)(1).     

Analysis of precision of activation-analysis methods

The precision of an activation-analysis method prescribes the estimation of the precision of a single analytical result. The adequacy of these estimates to account for the observed variation between duplicate results from the analysis of different samples and materials, is tested by the statistic T, which is shown to be approximated by a chi(2) distribution. Application of this test to the results of determinations of manganese in human serum by a method of established precision, led to the detection of airborne pollution of the serum during the sampling process. The subsequent improvement in sampling conditions was shown to give not only increased precision, but also improved accuracy of the results.     

A new method for the accurate determination of the isotopic state of single amide hydrogens within peptides using Fourier transform ion cyclotron resonance mass spectrometry

A new method is presented to accurately determine the probability of having a deuterium or hydrogen atom on a specific amide position within a peptide after deuterium/hydrogen (D/H) exchange in solution. Amide hydrogen exchange has been proven to be a sensitive probe for studying protein structures and structural dynamics. At the same time, mass spectrometry in combination with physical fragmentation methods is commonly used to sequence proteins based on an amino acid residue specific mass analysis. In the present study it is demonstrated that the isotopic patterns of a series of peptide fragment ions obtained with capillary-skimmer dissociation, as observed with a 9.4 T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer, can be used to calculate the isotopic state of specific amide hydrogens. This calculation is based on the experimentally observed isotopic patterns of two consecutive fragments and on the isotopic binomial distributions of the atoms in the residue constituting the difference between these two consecutive fragments. The applicability of the method is demonstrated by following the sequence-specific D/H exchange rate in solution of single amide hydrogens within some peptides.     

Application of the JKR Method to the Measurement of Adhesion to Langmuir-Blodgett Cellulose Surfaces

The JKR method has been applied for studying adhesion between poly(dimethylsiloxane) (PDMS) caps and Langmuir–Blodgett cellulose surfaces including the substrate, hydrophobized mica, and two flat mineral surfaces, bare mica and glass. The self-adhesion of PDMS caps and oxidized PDMS caps are included as a reference to compare with literature data. The results of the measurements have been compared with previous studies using the surface force apparatus and similar systems. A satisfactory agreement is obtained for simple systems showing no, or very limited, hysteresis between loading and unloading curves. In several cases, however, a large hysteresis is found between loading and unloading curves, with a larger adhesion measured from the pull-off force than from the JKR-curve determined on loading. This is, for instance, the case for PDMS against cellulose. The situation is analogous to that found in wetting studies showing a large hysteresis between advancing and receding contact angles.     

Photobiological characteristics and photosynthetic UV responses in two Ulva species (Chlorophyta) from southern Spain

The effect of different wavebands of artificial UV (UVB and UVA) and photosynthetically active radiation (PAR) was assessed in two species of the genus Ulva, U. olivascens and U. rotundata, from southern Spain in order to test for possible differences in acclimation of photosynthesis. Both species share similar morphology but are subject to different light environments: U. rotundata is an estuarine alga, inhabiting subtidal locations, while U. olivascens is an intertidal, sun-adapted organism. Algae were exposed to three different UV conditions, PAR+UVA+UVB, PAR+UVA and PAR for 7 d. Short-term exposure (6 h) was also carried out, using two PAR levels, 150 and 700 micromolm(-2)s(-1). Pigment contents and photosynthesis vs. irradiance curves from oxygen evolution were used to contrast sun- and shade adaptation between these species. O2-based net photosynthesis (Pmax) and PAM-chlorophyll fluorescence (optimal quantum yield, Fv/Fm) were used as parameters to evaluate photoinhibition of photosynthesis in the experiments. The results underline different photobiological characteristics among species: the subtidal U. rotundata had higher contents of pigments (Chl a, Chl b and carotenoids) than the sun-adapted U. olivascens, which resulted in higher thallus absorptance and P-I parameters characterized by higher photosynthetic efficiency at limiting irradiances (alpha) and lower saturating points for photosynthesis (Ek). After 7 d exposure, photoinhibition of Fv/Fm was close to 40-45% in both species. Differences between UV treatments were seen in U. rotundata after 5 d and after 7 d in U. olivascens, in which PAR+UVA impaired strongly photosynthesis (80%). Such patterns were correlated with a progressive decrease in pigment contents, specially chlorophylls. In short-term (6 h) exposures, combinations of UVA+UVB and high PAR level resulted in high rates of photoinhibition of chlorophyll fluorescence (68-92%) in U. rotundata, whereas in U. olivascens photoinhibition ranged between 42% and 53%. Photoinhibition under low PAR combined to UV radiation was lower than observed under high PAR. Net O2-Pmax revealed similar response among the species, with maximal photoinhibition rates close to 60% in algae incubated under high PAR+UVA+UVB. In the case of UV exposure in combination with low PAR, the highest photoinhibition rates were measured in U. rotundata.