Stereochemical Analysis of an Aromatic Triplet Di-π-methane Rearrangement

It is shown that (−)-(S)-N,N-dimethyl-2-(1′-methylallyl)aniline ((−)-(S)- 4 ), on direct irradiation in MeCN at 20°, undergoes in its lowest-lying triplet state an aromatic di-π-methane (ADPM) rearrangement to yield (−)-(1′R,2′R)- and (+)-(1′R,2′S)-N,N-dimethyl-2-(2-methylcyclopropyl)aniline ((−)-trans- and (+)-cis- 7 ) in an initial trans/cis ratio of 4.71 ± 0.14 and in optical yields of 28.8 ± 5.2% and 15 ± 5%, respectively. The ADPM rearrangement of (−)-(S)- 4 to the trans- and cis-configurated products occurs with a preponderance of the path leading to retention of configuration at the pivot atom (C(1′) in the reactant and C(2′) in the products) for (−)-trans- 7 and to inversion of configuration for (+)-cis- 7 , respectively. The results can be rationalized by assuming reaction paths which involve the occurrence of discrete 1,4- and 1,3-diradicals (cf. Schemes 10, 12, and 13). A general analysis of such ADPM rearrangements which allows the classification of these photochemical reactions in terms of borderline cases is presented (Scheme 14). It is found that the optical yields in these ‘step-by-step’ rearrangements are determined by the first step, i.e. by the disrotatory bond formation between C(2) of the aromatic moiety and C(2′) of the allylic side chain leading to the generation of the 1,4-diradicals. Moderation of the optical yields can occur in the ring closure of the 1,3-diradicals to the final products, which may take place with different trans/cis-ratios for the individual 1,3-diradicals. Compounds (−)-trans- 7 as well as (+)-cis- 7 easily undergo the well-known photochemical trans/cis-isomerization. It mainly leads to racemization. However, a small part of the molecules shows trans/cis-isomerization with inversion of configuration at C(1′), which is best explained by a photochemical cleavage of the C(1′)–C(3′) bond.     

Synthesis and Crystal Structure of Lithium Tetrametaphosphimate Tetrahydrate Li4(PO2NH)4 · 4 H2O

Single crystals of Li₄(PO₂NH)₄ · 4 H₂O were obtained by dissolving LiOH and H₄(PO₂NH)₄ · 2 H₂O in water and subsequent precipitation with acetone and ethanol followed by slow evaporation of the solvents. The structure of Li₄(PO₂NH)₄ · 4 H₂O was solved by single‐crystal X‐ray methods ( (No. 2), a = 489.2(2), b = 853.2(2), c = 880.5(2) pm, α = 101.71(3), β = 102.39(3), γ = 94.88(3)°, Z = 1). The structure is composed of LiO₄ tetrahedra and (PO₂NH)₄^4? ions. The P₄N₄ rings of the anions exhibit a slightly distorted chair–1 conformation, which is supported by IR data and has been described by torsion angles, displacement asymmetry parameters and puckering parameters. Via Li⁺ ions and hydrogen bonds, the tetrametaphosphimate anions are connected forming a three‐dimensional network.     

Investigation of the NMR enhancement factor in CuMn spin glasses

The NMR enhancement factor of a frozenCuMn spin glass has been measured at a temperatureT?T _g /5. The measurements were performed as function of static magnetic fields of different directions. A two component model of a spin glass has been outlined. One component being a “system of single spins” and the other one being a “subsystem of clusters”. Both components were attributed to different kinds of interaction being RKKY and dipole interaction respectively. The effective anisotropy field of the single spin system consists of two unidirectional contributionsH _a ^s andH _a ^c , which have been measured for different conditions. A second anisotropy fieldH _d binds the cluster system to the system of single spins. All anisotropy fields depend on the annealing temperature of the alloys.     

Photolithographically patternable nitrate-sensitive acrylate-based membrane

A photocurable acrylate matrix nitrate-sensitive membrane containing 2-nitrophenyl n-octyl ether as mediator and tetraalkylammonium nitrate as an active compound is described. The photocuring was achieved by the use of photoinitiators containing diaryliodonium chloride. This acrylate membrane is patternable via a photolithographic process with a only slight loss of electrochemical characteristics.     

A generalization of the Rouse-Zimm model

The idea of consistently averaging the hydrodynamic interaction and its various consequences for Hookean dumbbells are reviewed. For long chains this idea can be used to generalize the Rouse-Zimm model for polymer solutions. Unlike the usual Rouse-Zimm model, the new model for steady shear flow predicts a nonzero second normal stress coefficient and shear rate dependent material functions. In the limit of long chains, the viscosity and the normal stress coefficients are universal functions of the reduced shear rate.This paper was presented at the Frühjahrstagung des Fachausschusses Polymerphysik der Deutschen Physikalischen Gesellschaft at Kaiserslautern (West Germany), March 12–14, 1986.     

Electron propagator calculations of molecular electron affinities

An approximate electron propagator method for predictive calculations of molecular electron affinities is proposed. The self-energy accounts for relaxation effects to all orders Additional correlation effects are treated using a diagonal approximation with shifted denominators. Applications to CN, NH₂, and PH₂ are reported.     

Die automatisierte Bestimmung von Kohlenstoff und Wasserstoff. IV

Zusammenfassung Ein Gemisch von-Naphthylisocyanat mit etwa 6 1,4-Diazabicyklo-[2,2,2]-oktan (10–15 ml) reagiert quantitativ und sofort mit mg-Mengen Wasser unter Bildung von Kohlendioxid, das anschließend automatisch titriert wird. Wassermengen von etwa 0,3–3 mg lassen sich in etwa 8 min mit einer Standardabweichung von 0,8% rel. bestimmen.

---

The automatic determination of carbon and hydrogen. IV

Summary A mixture of about 10–15 ml of-naphthylisocyanate with about 6%. 1,4-diazabicyclo [2,2,2]-octane reacts instantaneously and quantitatively with water in mg quantities. The resulting carbon dioxide is automatically titrated. Amounts of water of about 0.3–3 mg were determined within 8 min. with a standard deviation of 0.8% rel.

     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

Untersuchungen über das dielektrische Verhalten von Polypropylen

Zusammenfassung Das Verhalten von Polypropylen im elektrischen Wechselfeld wurde im Frequenzbereich von 0,15 kHz bis 300 kHz und im Temperaturbereich von –75 C bis +140 C untersucht. Es konnte sowohl ein Tieftemperaturdispersionsgebiet —-Absorption — als auch ein Hochtemperaturdispersionsgebiet —-Absorption — beobachtet werden. Die Untersuchungsergebnisse wurden, um die Breite des Dispersionsgebietes und die zugehörigen -Stufen zu bestimmen, nach demCole-Cole-Kreisbogengesetz analysiert. Aus dem Anstieg der Geraden: logf _max 1/T _K wurden sowohl für die- als auch fur die-Absorption die experimentellen Aktivierungsenergien berechnet. Eine Deutung der Ergebnisse wurde versucht.     

New 6-(4-Bromophenyl)-imidazo[2,1-b]thiazole Derivatives: Synthesis and Antimicrobial Activity

Summary.  New 4-alkyl/aryl-1-((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-3-thiosemicarbazides and 3-alkyl/aryl-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinones were synthesized from 6-(4-bromophenyl)-imidazo[2,1-b]thiazole-3-acetic acid hydrazide. Their structures were elucidated by elemental analyses and spectroscopic data. All compounds were tested for antibacterial and antifungal activities. The antimicrobial activities of the compounds were assessed by the microbroth dilution technique. The compounds were also evaluated for antituberculosis activity against Mycobacterium tuberculosis H₃₇Rv (ATCC 27294); they exhibited varying degrees of inhibition in the in vitro primary screening at 6.25 μg · cm⁻³. The most active compound was 3-(4-nitrophenyl)-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinone. Corresponding author. E-mail: nurayulusoy@yahoo.com Received December 10, 2001. Accepted (revised) March 1, 2002