Cone motion viscosity and optical second harmonic generation of ferroelectric liquid crystalline dendrimers

We report second harmonic generation in a ferroelectric liquid crystalline trimer and ferroelectric liquid crystalline dendrimers of first, second and third generation. Thin cells were filled with the compounds by capillary forces at elevated temperature, and cooled from the surface stabilized ferroelectric state to below the glass transition temperature, while kept in an electric field. The cone motion viscosity and the threshold electric field for unwinding of the helix axis of the chiral tilted smectic mesophases were studied separately at elevated temperature, and these data were used to optimize the preparation of the films. The measured response time was between 0.3 and 3ms, which corresponds to a cone motion viscosity between 0.5 and 50 Pa s. Second harmonic generation was studied both at elevated temperature with an electric field and at room temperature with and without electric field. The first generation dendrimer exhibited a strong increase in the second order non-linear optical response with time at room temperature. The d ₂₃-coefficient of this dendrimer was approximately four times larger than for the other macromolecules and was 0.045 pm V^-1. The relatively large d-coefficient of the first generation dendrimer is ascribed to crystallization, which improved the orientation of the molecular dipoles.     

Preparation of Methyl 6‐O‐p‐Nitrobenzoyl‐β‐d‐Glucoside

Methyl 6‐O‐p‐nitrobenzoyl‐β‐d‐glucoside was synthesized by reacting methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside with N‐bromosuccinimide (NBS). First, methyl β‐d‐glucoside was converted into methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside with p‐nitrobenzaldehyde. Later, methyl 4,6‐O‐p‐nitrobenzylidine‐β‐d‐glucoside was opened oxidatively with NBS to give methyl 6‐O‐p‐nitrobenzoyl‐β‐d‐glucoside.     

Lyotropic Liquid Crystal to Soft Mesocrystal Transformation in Hydrated Salt–Surfactant Mixtures

Hydrated CaCl₂, LiI, and MgCl₂ salts induce self‐assembly in nonionic surfactants (such as C₁₂H₂₅(OCH₂CH₂)₁₀OH) to form lyotropic liquid‐crystalline (LLC) mesophases that undergo a phase transition to a new type of soft mesocrystal (SMC) under ambient conditions. The SMC samples can be obtained by aging the LLC samples, which were prepared as thin films by spin‐coating, dip‐coating, or drop‐casting of a clear homogenized solution of water, salt, and surfactant over a substrate surface. The LLC mesophase exists up to a salt/surfactant mole ratio of 8, 10, and 4 (corresponding to 59, 68, and 40 wt % salt/surfactant) in the CaCl₂, LiI, and MgCl₂ mesophases, respectively. The SMC phase can transform back to a LLC mesophase at a higher relative humidity. The phase transformations have been monitored using powder X‐ray diffraction (PXRD), polarized optical microscopy (POM), and FTIR techniques. The LLC mesophases only diffract at small angles, but the SMCs diffract at both small and wide angles. The broad surfactant features in the FTIR spectra of the LLC mesophases become sharp and well resolved upon SMC formation. The unit cell of the mesophases expands upon SMC transformation, in which the expansion is largest in the MgCl₂ and smallest in the CaCl₂ systems. The POM images of the SMCs display birefringent textures with well‐defined edges, similar to crystals. However, the surface of the crystals is highly patterned, like buckling patterns, which indicates that these crystals are quite soft. This unusual phase behavior could be beneficial in designing new soft materials in the fields of phase‐changing materials and mesostructured materials, and it demonstrates the richness of the phase behavior in the salt–surfactant mesophases.     

Clean and reactive nanostructured cellulose surface

A simple, solvent-free and low cost method to activate the surface of nanofibrillated cellulose films for further functionalization is presented. The method is based on the oxidative properties of UV radiation and ozone, to effectively remove contaminants from nanocellulosic surface, which remains clean and reactive for at least a week. The efficiency of the method is demonstrated by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. In clear contrast to previous results on nanoscaled cellulose the relative atomic concentration of non-cellulosic carbon atoms was only 4 %, and water completely wetted the surface within seconds. After activation, neither chemical degradation nor morphological changes on cellulose were observed. This surface activation is essential for further functionalization of the film in dry state or nonpolar media. The surface activation was confirmed by silylation and a four times higher degree of substitution was achieved on the activated sample compared to non-activated reference film, as monitored with XPS.     

A quantitative LC/MS method targeting urinary 1-methyl-4-imidazoleacetic acid for safety monitoring of the global histamine turnover in clinical studies

Anaphylaxis is a potentially life-threatening condition triggered mainly by the release of inflammatory mediators, notably histamine. In pharmaceutical research, drug discovery, and clinical evaluation, it may be necessary to accurately assess the potential of a compound, event, or disorder to promote the release of histamine. In contrast to the measurement of plasma histamine, determination of the stable metabolite 1-methyl-4-imidazoleacetic acid (tele-MIAA) in urine provides a noninvasive and more reliable methodology to monitor histamine release. This study presents a repeatable high-performance liquid chromatography coupled to electrospray mass spectrometry (LC–ESI–MS) method where tele-MIAA is baseline separated from its structural isomer 1-methyl-5-imidazoleacetic acid (pi-MIAA) and an unknown in human urine. The ion-pairing chromatography method, in reversed-phase mode, based on 0.5 mM tridecafluoroheptanoic acid demonstrated high repeatability and was applied in a clinical development program that comprised a large number of clinical samples from different cohorts. The inter- and intra-run precision of the method for tele-MIAA were 8.4 and 4.3 %, respectively, at the mean urinary concentration level, while method accuracy was between ?16.2 and 8.0 % across the linear concentration range of 22–1,111 ng mL^?1. Overall, method precision was greater than that reported in previously published methods and enabled the identification of gender differences that were independent of age or demography. The median concentration measured in female subjects was 3.0 μmol mmol^?1 of creatinine, and for male subjects, it was 2.1 μmol mmol^?1 of creatinine. The results demonstrate that the method provides unprecedented accuracy, precision, and practicality for the measurement of tele-MIAA in large clinical settings.

Anticancer Aminoferrocene Derivatives Inducing Production of Mitochondrial Reactive Oxygen Species

Elevated levels of reactive oxygen species (ROS) and deficient mitochondria are two weak points of cancer cells. Their simultaneous targeting is a valid therapeutic strategy to design highly potent anticancer drugs. The remaining challenge is to limit the drug effects to cancer cells without affecting normal ones. We have previously developed three aminoferrocene (AF)-based derivatives, which are activated in the presence of elevated levels of ROS present in cancer cells with formation of electron-rich compounds able to generate ROS and reduce mitochondrial membrane potential (MMP). All of them exhibit important drawbacks including either low efficacy or high unspecific toxicity that prevents their application in vivo up to date. Herein we describe unusual AF-derivatives lacking these drawbacks. These compounds act via an alternative mechanism: they are chemically stable in the presence of ROS, generate mitochondrial ROS in cancer cells, but not normal cells and exhibit anticancer effect in vivo.     

A Comparison of Four Different Electrode Matrices on the Performance of Amperometric Hydrogen Peroxide (Bio)Sensors

A comparison of the analytical performances of four different (bio)sensor designs in H₂O₂ determination is discussed. The (bio)sensor designs developed were based on the use of (i) multiwalled carbon nanotubes (MWCNT), zinc oxide nanoparticles (ZnONP), prussian blue (PB); (ii) MWCNT, ZnONP, PB and ionic liquid (IL); (iii) MWCNT, ZnONP and horseradish peroxidase (HRP) and (iv) MWCNT, ZnONP, HRP and IL modified glassy carbon electrode (GCE). A performance comparison of (bio)sensors showed that the one based on HRP/IL-MWCNT-ZnONP/GCE showed the best analytical characteristics with a linear dynamic range of 9.99×10⁻⁸–7.55×10⁻⁴ M, detection limit of 1.37×10⁻⁸ M and sensitivity of 17.00 μA mM⁻¹.     

Reactivities of mixed organozinc and mixed organocopper reagents. Part 13 Kinetic study for phosphine‐catalyzed acylation of alkylarylzincs and effect of residual group on the transfer rate of alkyl group

Kinetics of reactions of di‐n‐butylzinc, n‐Bu₂Zn, and mixed n‐butyl(substituted phenyl)zinc reagents and n‐Bu(functional group (FG)?C₆H₄)Zn with benzoyl chloride in the presence of tri‐n‐butylphosphine have been investigated. Reaction rates of transferable n‐butyl group have been determined in tetrahydrofuran at 0 °C to compare the transfer rate of n‐butyl group in homo and mixed diorganozincs. Rate law is consistent with a third‐order reaction, which is first order in diorganozinc, benzoyl chloride, and n‐Bu₃P, and a mechanism was proposed. The lower reaction rate of n‐BuPhZn than that of n‐Bu₂Zn and negative reaction constant in Hammett plot are in accordance with the carbanionic charge of transferable n‐butyl group in the acylation reaction. These findings support the hypothesis that the reaction rate of transferable group, R_T, changes depending upon the residual group, R_R, in R_RR_TZn reagents. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved CE(SDS)-CZE-MS method utilizing an 8-port nanoliter valve

Capillary sieving electrophoresis utilizing SDS (CE(SDS)) is one of the most applied methods for the analysis of antibody (mAb) size heterogeneity in the biopharmaceutical industry. Inadequate peak identification of observed protein fragments is still a major issue. In a recent publication, we introduced an electrophoretic 2D system, enabling online mass spectrometric detection of generic CE(SDS) separated peaks and identification of several mAb fragments. However, an improvement regarding system stability and handling of the approach was desired. Here, we introduce a novel 8-port valve in conjunction with an optimized decomplexation strategy. The valve contains four sample loops with increased distances between the separation dimensions. Thus, successively coinjection of solvent and cationic surfactant without any additional detector in the second dimension is enabled, simplifying the decomplexation strategy. Removal efficiency was optimized by testing different volumes of solvents as presample and cationic surfactant as postsample zone. 2D measurements of the light and heavy chain of the reduced NIST mAb with the 8-port valve and the optimized decomplexation strategy demonstrates the increased robustness of the system. The presented novel set-up is a step toward routine application of CE(SDS)-CZE-MS for impurity characterization of proteins in the biopharmaceutical field.