Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Measurement of intense microwave field patterns using a neon glow indicator lamp

A novel method using small neon glow lamps with electrodes is developed for measuring intense microwave field patterns. When the lamp axis coincide with the electric field direction, the lamp discharge starts at the feeblest microwave electric field strength. Therefore, the lamp axis shows the field direction and the discharge starting indicates the field strength. The field strength for starting the microwave discharge is less than the strength for AC discharge, because of its low loss discharge mechanism. In the experiments using a microwave oven, it has been demonstrated again comparing with the simulated results that the method is able to use for measuring the intense electric field strength and direction.     

PHOTOREACTIVATION ASSOCIATED WITH CHROMOSOMAL ABNORMALITY IN SEA URCHIN EGGS FERTILIZED WITH ULTRAVIOLET-IRRADIATED SPERM

Abstract— As a model for studies involving biologic systems, rates of hematoporphyrin and protopor-phyrin-sensitized photooxidation of tryptophan were measured in water-methanol mixtures. Absorption and fluorescence-emission spectra associated with solutions of porphyrins in different water-methano! mixtures were also examined. The optimal rate of photooxidation by hematoporphyrin occurred in 30% methanol; by protoporphyrin, in 60% methanol. Absorption spectra were examined to characterize dispersion of hematoporphyrin into monomeric form in 90% methanol, and the dimer formation which predominates in 30% methanol. With the more hydrophobic protoporphyrin, an absorption spectrum characteristic of drug monomer was seen in 100% methanol, a dimer spectrum was observed in 60% methanol. At methanol concentrations < 60%, we observed impaired photooxidation and another alteration in the absorption pattern apparently reflecting drug aggregation beyond the dimer stage. Fluorescence emission maxima of both porphyrins were blue-shifted with increasing solvent dielectric constant, but an additional blue shift was detected in an aqueous environment which was apparently related to porphyrin aggregation. Absorption and fluorescence-emission spectra appear helpful for characterizing environmental determinants of porphyrin-sensitized photooxidation.     

Preparation of Polymer Particles Coated with Hydroxyapatite

Polymer particles coated with hydroxyapatite were prepared by treating Pd0 immobilized polystyrene-co-acrylic acid particles in aqueous CaCl2 and NaH2PO2 solutions. Hydroxyapatite coating took place at neutral to alkaline pH conditions, and the homogeneous growth of the hydroxyapatite layer on the surface of polymer particles was observed at relatively low temperature (30-50 degrees C). The thickness of the hydroxyapatite layer increased with reaction time. Copyright 1999 Academic Press.     

Spectrofluorimetric assay for acyl CoA-cholesterol acyltransferase

A sensitive assay for acyl CoA-cholesterol acyltransferase (EC 2.3.1.26) in rat liver microsomal and mitochondrial preparations is described. The lowered cholesterol concentration in the enzyme reaction with oleoyl CoA is determined spectrofluorimetrically by using the cholesterol oxidase/peroxidase/p-hydroxyphenylpropionic acid system. The assay requires as little as 20 μg of protein in the enzyme preparation.     

Distribution of polymer deposition in plasma polymerization. III. Effect of discharge power

Distribution of polymer deposition in an inductively coupled rf discharge system is studied as a function of level of discharge power with acetylene and styrene as monomers. When a fixed flow rate is used, the discharge power has a relatively small effect on the pattern of distribution of polymer deposition as long as values of W/FM, where W is discharge wattage, F is flow rate, and M is molecular weight of monomer, are maintained above a critical level to maintain full glow in the reaction tube. It has been shown that plasma polymerization of two monomers which have different molecular weights can be compared in a fair manner by selecting conditions to yield similar value of W/FM.     

Plasma polymerization of tetrafluoroethylene. III. Reproducibility and effects of substrate and reactor materials

Plasma polylmerization occurs in plasmas surrounded by surfaces and polymer formation is one of the complicated interactions that take place between active species and molecules which constitute surfaces and gas phases. Effects of reactor wall, substrate materials, flow rate, and discharge power on polymer formation, and properties of polymer deposits were investigated by ESCA, IR (infrared) spectroscopy, and the measurement of system pressure. The effect of surface is important at the initial stage of plasma polymerization which can be easily detected by the system pressure change; however, integrated properties such as IR spectroscopy and the deposition rate show the effect in a less pronounced manner. ESCA, which reflects the properties of surface (approximately 20 A? in depth), showed the effect of surface in an even less sensitive manner. The amount and properties (including the effects of surfaces) are dependent on plasma polymerization parameter W/FM(W, wattage; F, volume flow rate; and M, molecualar weight of monomer) and the location of deposition within a reactor. IR and ESCA data clearly showed the dependence of polymer properties on W/FM; i.e., increase of W and decrease of M to be equivalent. When all these factors were kept under control, the reproducibility of plasma polymerization was found to be excellent.     

Vaporization and thermal decomposition of transition metal salts in flameless atomic absorption spectrometry with a carbon tube atomizer

Vaporization and thermal decomposition of Cr, Mn, Fe, Co, Ni and Cu salts were investigated by measuring the absorption spectra observed when aqueous solutions of these salts were heated in the carbon tube atomizer. Gaseous metal halides are vaporized in the atomizer at temperatures above 300–500° C. SO₂ and NO are produced by thermal decomposition of metal sulfates and nitrates, respectively. The vaporization of metal halides is also confirmed by the spectra for solutions of metals in hydrochloric acid and for mixtures of metal nitrates and ammonium halides.     

1,2-bis(4-methoxyphenyl)ethylenediamine as a fluorogenic reagent for reducing carbohydrates

Eight 1,2-diarylethylenediamines in the meso- or DL-form produce fluorescence when heated with reducing carbohydrates in an alkaline medium. Of the diamines, meso-1,2-bis(4-methoxyphenyl)ethylenediamine is the most favourable reagent for reducing carbohydrates, including 2- deoxy sugars, amino sugars and sialic acids. The reagent permits the fluorimetric determination of reducing carbohydrates at concentrations as low as 0.2–0.9 nmol ml^?1.