七芯光子晶体光纤中百瓦量级超连续谱的产生

采用平均功率为141.6 W的皮秒光纤激光泵浦一段国产七芯光子晶体光纤,获得了平均功率为104.2 W、连续光谱覆盖范围从750至1700 nm以上的超连续谱输出.详细研究了超连续光谱随泵浦功率增加的演变过程,并对基于该七芯光子晶体光纤的超连续谱光源的光谱拓展和功率提升潜力进行相关的分析和讨论.该研究结果对高功率超连续谱光源的发展具有一定的参考价值.     

1150nm掺镱光纤激光器输出特性实验研究

以光纤光栅对为激光腔、双包层掺镱光纤为增益介质、976nm半导体激光器为泵浦源,研制全光纤化的1 150nm波段长波光纤激光振荡器.在室温下实现了最大平均输出功率为12.7 W的1 150nm波段单模光纤激光输出,激光振荡器的光光转换效率为42.33%.最大功率输出时,激光中心波长为1 150.48nm,光谱的3dB线宽为0.45nm,边模抑制比达38dB.该研究对研制1 150nm波段高功率光纤激光振荡器具有一定的参考价值.     

Different supercontinuum generation processes in photonic crystal fibers pumped with a 1064-nm picosecond pulse

Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers. A 20-W all-fiber picosecond master oscillator-power amplifier （MOPA） laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation. Three diverse supercontinuum formation processes are observed to correspond to photonie crystal fibers with distinct dis- persion properties. The experimental results are consistent with the relevant theoretical results. Based on the above analyses, a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber. The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.     

2.8μm增益开关Er∶ZBLAN光纤激光器的数值模拟

建立了适用于2.8μm增益开关掺Er~(3+)的氟化物光纤(Er∶ZBLAN)激光器的计算模型,并进行了数值模拟。模拟发现存在最佳输出镜透过率使得输出功率最大,同时耦合率也影响脉宽、峰值和脉冲形态。模拟了抽运功率对脉冲形态的影响,发现弱抽运时两个抽运周期内仅出现一个信号光脉冲,而强抽运时一个抽运周期内出现多个信号光脉冲的现象。通过模拟发现了若干未被实验报道的新现象和规律,如耦合率对输出功率、能量、脉冲形态的影响规律;抽运功率阈值附近会出现与抽运周期一致的弱信号脉冲等。研究表明,在适当耦合率和抽运功率时,2.8μm Er∶ZBLAN激光器可以实现稳定增益开关脉冲输出。     

双波长抽运拉锥光子晶体光纤产生超连续谱研究

利用1064 nm抽运光在总长度为1 m的光子晶体光纤(PCF)的前半段(77 cm)通过四波混频产生747 nm短波信号光,并对光纤的后半段进行拉锥处理,拉锥光纤具有707 nm和1177 nm两个零色散点(ZDW).利用1064 nm抽运光和产生的747 nm信号光共同在两个零色散点之间的反常色散区抽运拉锥光子晶体...     

高峰值功率中红外2.8μm脉冲光纤激光器

采用中心波长为975nm半导体激光器泵浦高掺铒氟化物双包层光纤Er∶ZBLAN,并在谐振腔内插入主动调Q元件,获得了工作频率为1~10kHz的2.8μm激光主动调Q脉冲输出.在工作频率为10kHz条件下,获得了最大单脉冲能量为134.5μJ、脉宽为127.3ns、峰值功率为1.1kW的脉冲输出.     

多芯光子晶体光纤高功率超连续谱光源

分析基于单芯光子晶体光纤的超连续谱光源在提升平均输出功率时所面临的问题,指出采用多芯光子晶体光纤作为超连续谱产生介质是一种实现高功率超连续谱产生的潜在方案。使用自制皮秒光纤激光器泵浦一段国产多芯光子晶体光纤,实现了光谱范围750~1700 nm,平均功率42.3 W的全光纤化高功率超连续谱输出。     

基于光子晶体光纤的百瓦量级超连续谱光源研究

采用脉冲重复频率可调的高功率皮秒脉冲光纤激 光抽运光子晶体光纤产生了平均输出功率为101 W的全 光纤化超连续谱. 通过一系列的对比实验, 详细研究了抽运激光的脉冲重复频率以及光子晶体光纤的长度对超连续谱产生的影响. 最后, 对如何实现更高平均功率的超连续谱输出进行相关的分析和讨论. 相关研究结果可以为进一步发展基于光子晶体光纤的高功率超连续谱光源提供一定的参考. 关键词： 光子晶体光纤 非线性光纤光学 超连续谱产生     

Generation of a compact high-power high-efficiency normal-dispersion pumping supercontinuum in silica photonic crystal fiber pumped with a 1064-nm picosecond pulse

Broadband normal dispersion pumping supercontinuum （SC） generation in silica photonic crystal fiber （PCF） is investigated in this paper. A 1064-nm picosecond fiber laser is used to pump silica PCF for the SC generation. The length of PCF is optimized for the most efficient stimulated Raman scattering process in the picosecond pump pulse region. The first stimulated Raman Stokes peak is located in the anomalous dispersion regime of the PCF and near the zero dispersion wavelength; thus the SC generation process can benefit from both a normal dispersion pumping scheme and an anomalous dispersion pumping scheme. The 51.7-W SC spanning from about 700 nm to beyond 1700 nm is generated with an all-fiber configuration, and the pump-to-SC conversion efficiency is up to 90%. In order to avoid the output fiber end face damage and increase the stability of the system, an improved output solution for the high power SC is proposed in our experiment. This high-efficiency near-infrared SC source is very suitable for applications in which average output power and spectral power density are firstly desirable.