Hydration of the amylopectin branch point. Evidence of restricted conformational diversity of the alpha-(1-->6) linkage

The hydration behavior of a model compound for the amylopectin branch point, methyl 6'-alpha-maltosyl-alpha-maltotrioside, was investigated by combining molecular dynamics simulations in explicit water, 500 MHz NMR spectroscopy, including pulsed field gradient diffusion measurements, and exploratory multivariate data analysis. In comparison with results on a tetrasaccharide analogue, the study reveals that the conformational diversity of the three-bond alpha-(1-->6) linkage becomes quite limited in aqueous solution upon the addition of a fifth glucose residue that elongates the alpha-(1-->6) branch. This investigation reveals two plausible starch branch point structures, one that permits the formation of double helices and one that is adapted for interconnection of double helices. The apparent rigidity of the former is explained by the presence of water pockets/bridges in the vicinity of the branch point that lock the pentasaccharide structure into one conformational family that is able to accommodate the creation of the double-helical amylopectin structure.     

Octanuclear oxothiomolybdate(v) rings: structure and ionic-conducting properties

A family of alkali salts of octanuclear oxothiomolybdate rings has been synthesized by crystallization of the [Mo(8)S(8)O(8)(OH)(8)[HMO(5)(H(2)O)]](3-) (noted HMo(8)M(3-); M=Mo, W) and [Mo(8)S(8)O(8)(OH)(8)(C(2)O(4))](2-) (noted Mo(8)ox(2-)) anions in an aqueous solution of ACl (A=Li, Na, K, Rb). Single-crystal X-ray diffraction experiments have been performed showing that the alkali salts exhibit a similar three-dimensional structure. Disordered alkali ions form columns to which the anionic rings are anchored. Ionic-conductivity measurements on pressed pellets have revealed two different behaviors. The lithium salts of HMo(8)M(3-) (M=Mo, W) are moderately good proton conductors at room temperature (sigma=10(-5) S cm(-1)) and the profile of conductivity as a function of relative humidity shows that the conductivity is due to surface-proton motion (particle-hydrate-type mechanism). On the other hand, the lithium salt of Mo(8)ox(2-) competes with the best crystalline lithium conductors at room temperature (sigma=10(-3) S cm(-1)), and (7)Li NMR experiments confirm the mobility of the lithium ions along the one-dimensional channels of this material.     

Fluorination rates of polyolefins as a function of structure and gas atmosphere

Polyolefins and fluoropolymers were reacted with elemental fluorine under carefully controlled conditions in a thermobalance adapted to be compatible with fluorine gas. The fluorination reactions were monitored by measuring the mass increase as a result of hydrogen substitution by fluorine. The mass increase was directly proportional to the square root of the fluorination time, which indicates that fluorine gas diffusion to the unreacted surface is the rate determining step. The fluorination rate was increased by increasing the fluorine concentration and the fluorination temperature. The fluorination rate is higher when nitrogen rather than helium is used as diluting gas. The fluorination rate for the reaction in which CO₂ is used as diluting gas is the same as during fluorination with nitrogen as diluting gas, while the presence of oxygen dramatically decreased the fluorination rate. Oxygen is incorporated during fluorination with oxygen as diluting gas, while no functionalization was observed when CO₂ was employed as diluting gas. The effect of polymer structure on fluorination was studied. Poly(vinylfluoride) gained mass during fluorination, while no reaction was observed for poly(vinylidenefluoride). The reaction rate for polypropylene was higher than that of polyethylene. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Investigation and comparison of the electrochemical behavior of some organic and biological molecules at various conducting polymer electrodes

Electrodes modified by the electrodepozition of conducting organic polymers such as poly(3-methylthiophene)(PMT), polypyrrole (PPY) and polyaniline (PAN) were used as chemical sensors for voltammetric analysis and flow injection detection of some organic and biological molecules. The electrochemical behaviors of catechol, ascorbic acid, hydroquinone, dopamine, epinephrine, acetaminophen and p-aminophenol were examined by differential pulse voltammetry. The electrochemical behavior of these molecules at different electrodes was compared and the effects on behavior of electrolyte type and its pH and the film thickness were systematically examined. The results showed that the proposed modified surface catalyzes the oxidation of these compounds. Electrocatalytic 'efficiency' decreases in order of poly-3-methylthiophene, polypyrrole and polyaniline. Voltammetric peak positions were affected by the nature of the electrolyte and its pH. Also, the effect of increasing film thickness was to observe increased peak heights. Polymer coated electrodes were also used in an amperometric detector for flow injection analysis of most of the these compounds. The responses of the polymer electrode were 5-15 times larger as compared with those of bare platinum. PMT showed improved performance as an amperometric detector for flow injection analysis systems over other types of polymer electrodes. Detection limits as low as 10(-8)-10(-9) M were achieved using the PMT, compared with 10(-6)-10(-8) M using platinum electrodes. In the flow injection analysis, with increasing molecular weight of analyte molecules was to observe decreased peak heights.     

Structural disorder along the lithium diffusion pathway in cubically stabilized lithium manganese spinel: I. Synchrotron X-ray studies

Electron density distribution, EXAFS, and transmission electron microscope studies on stoichiometric Li(Mg_1/6Mn_11/6)O₄ have revealed that: (1) the structure is essentially of spinel-type with slight diffuse scattering, (2) the Li atoms are not all located at the ideal 8a site of the spinel structure, but are partially tetrahedrally distributed along the 8a-16c tie line, (3) the O atoms also exhibit a statistical distribution about their ideal positions and (4) the Mn 3d electrons are squeezed out toward the open space of the coordinating octahedra with D_3d distortion. The present results indicate the possible existence of many metastable Li positions in the structure, suggestive of complicated Li atom hopping routes in conjunction with a local distortion of neighboring atoms at least up to the second shell.     

A New Synthetic Framework for 11‐Demethylellipticine

A new synthetic route for the synthesis of 5‐methyl‐6H‐pyrido[4,3‐b]carbazole ( 8 ), so‐called 11‐demethylellipticine, was described. Construction of the tetracyclic structure hexahydro‐1H‐pyrido[4,3‐b]carbazol‐5(6H)‐one skeleton ( 6 ) was also achieved by nucleophilic substitution reaction in the synthetic route. Also new tetrahydrocarbazole derivatives ( 2 , 3 , 4 , and 5 ) were synthesized. Several ellipticine analogs and octahydropyridocarbazole‐based G‐protein coupled receptors inhibitors can also be synthesized from tetracyclic structure ( 6 ) because of carbonyl functionality at position 5.     

Comparative behavior of britholites and monazite/brabantite solid solutions during leaching tests: a combined experimental and DFT approach

In the field of the specific immobilization of actinides, several phosphate-based ceramics have already been proposed as suitable candidates. Among them, britholite and monazite/brabantite (now called monazite/cheralite) solid solutions have been considered as serious candidates on the basis of several properties of interest. Although both matrices appear almost similar from a chemical point of view, their chemical behavior during leaching tests appear to be strongly different with normalized dissolution rates of typically (2.1 +/- 0.2) g.m(-2).day(-1) for Th-britholites (10(-1)M HNO(3), theta = 25 degrees C, dynamic conditions) and (2.2 +/- 0.2) 10(-5) g.m(-2).day(-1) for Th-brabantites (10(-1)M HNO(3), theta = 90 degrees C, dynamic conditions). To understand such difference from a crystallographic point of view, comparative leaching tests have been performed using either high or low renewal of the leachate. The results obtained clearly revealed a lower chemical durability of An-britholites compared to that of (Ln, Ca, An)-monazite/brabantite solid solutions. As a confirmation of this point, density functional theory calculations clearly showed some great differences in the cohesive energy of calcium in both crystal structures, which can explain this strong difference in the chemical durability of both materials.     

Design of highly porous melamine-based networks through a bicontinuous microemulsion templating strategy

Designing low density polymeric porous materials with defined pore sizes (diameters in the 100 nm range) still remains a real synthesis challenge. Here, for the first time, we present a strategy by which bicontinuous microemulsions are used as templating agents for the in-situ aqueous polycondensation of organic resins (melamine formaldehyde, MF). The behaviour of surfactants with different head-groups in systems including oil and MF-containing aqueous phase is studied. While many surfactants are not compatible with aqueous MF precondensates, here we report a non-ionic surfactant either used solely or along with anionic surfactants which prove to be successful at keeping bicontinuous microemulsion systems homogeneous even during early stages of polymerisation. However, upon acid-catalysis it becomes clear that the pore structure of the organic material is largely controlled by the kinetics of phase separation due to the sol–gel process rather than by the thermodynamic equilibrium of the template (microemulsion). Indeed, despite numerous attempts, stabilising the microemulsion interface with zero curvature (bicontinuous) has remained problematic. Instead, we show a new behaviour for the MF resin whereby non-spherical MF morphologies (i.e. thread-like structures) can be obtained by specific interactions between the aqueous amino resin and the acid counterions.     

Vesicles to concentrate iron in low-iron media: an attempt to mimic marine siderophores

Amphiphilic catechol-type iron chelators were studied with the aim of mimicking the properties of marine bacterial siderophores. The Fe(III) complexation constants and aqueous solution speciation of L(S10), a sulfonated catechol unit that has a C(10) lipophilic carbon chain connected by an amide linkage, were determined by spectrophotometric titration. The calculated value of pFe3+ is 18.1 at pH 7.4. Cryogenic transmission electron microscopy showed that the tris(catecholate) ferric complex formed at physiological pH initially assembles into micelles, in which the catecholate-iron units stay on the exterior of the micelle. The average diameter of these micelles was estimated to be 4.2 nm. The micelles then slowly rearrange into clusters of different sizes, which leads to the formation of unilamellar and bilamellar vesicles. The reorganization processes are comparable to those observed by Butler et al. for the marinobactin siderophores produced by marine bacteria, but in contrast to the marinobactins, vesicles of the Fe3+-L(S10) complex form without an excess of iron relative to ligand concentration. The time-dependent micelle-to-vesicle transition is discussed herein.     

Quantitative determination of octadecenedioic acid in human skin and transdermal perfusates by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometric (MS) detection is developed and validated for the accurate and precise determination of octadecenedioic acid (C18:1 DIOIC) in human skin samples and transdermal perfusates. C18:1 DIOIC is extracted using methanol. The saturated analogue 1,18-octadecanedioic acid (C18:0 DIOIC) is added as internal standard. Prior to analysis, both compounds are converted to their trimethylsilylated derivatives using N,O-bis(trimethylsilyl)trifluoroacetamide with 15% trimethylchlorosilane. Quantitation is performed in selected ion monitoring mode with a limit of quantitation of 250 ng/mL. Linearity with a correlation coefficient of 0.998 is obtained over a concentration range of 250-2000 ng/mL. Values for within-day accuracy range from 94.5% to 102.4%, and from 97.5% to 105.8% for between-day accuracy. Within- and between-day precision values are better than 5% and 7%, respectively. The recovery values from the various matrices vary from 92.6% to 104.0%. The GC-MS method is employed for the determination of C18:1 DIOIC after application of an emulsion containing the active ingredient onto human skin in vitro. The results demonstrate that the method is suitable for the determination of C18:1 DIOIC in human skin samples and transdermal perfusates.