Coupled-cluster methods including noniterative corrections for quadruple excitations

A new method is presented for treating the effects of quadruple excitations in coupled-cluster theory. In the approach, quadruple excitation contributions are computed from a formula based on a non-Hermitian perturbation theory analogous to that used previously to justify the usual noniterative triples correction used in the coupled cluster singles and doubles method with a perturbative treatment of the triple excitations (CCSD(T)). The method discussed in this paper plays a parallel role in improving energies obtained with the full coupled-cluster singles, doubles, and triples method (CCSDT) by adding a perturbative treatment of the quadruple excitations (CCSDT(Q)). The method is tested for an extensive set of examples, and is shown to provide total energies that compare favorably with those obtained with the full singles, doubles, triples, and quadruples (CCSDTQ) method.     

Synthesis,Structure and Reactivity of PH‐Phosphoraneiminato‐ and Iminophosphoraneiminato Group 4 Transition‐Metal Complexes

The versatile coordination chemistry of the well‐investigated phosphoraneiminato‐ligand R₃PN^— ( I ) was extended by the successive introduction of protons to the phosphorus atom. The position of the resulting equilibrium between the NH‐phosphanylamido‐ [R₂P‐NH^—] and the PH‐phosphoraneiminato‐form [R₂HP=N^—] is affected by the Lewis acidity of the coordinated metal fragment. Experimental studies on complexes with various substitution patterns at the group 4 metal center R₂HP=N[M] ( II ) were unambiguously confirmed by DFT‐calculations. The isolation of group 4 PH‐dihydrido‐phosphoraneiminato‐complexes RH₂P‐N[M] ( III ) is prevented by the low thermodynamic stability of the target molecules, also supported by the results of ab initio calculations. However, an access to the by then unknown transition‐metal substituted iminophosphanes RP=N[M] ( IV ) was verified for the first time. Within extensive studies on the coordination chemistry of bis(imino)phosphoranes RP(=NR′)(=NR″), several species of group 4 complexes R(R′N=)P=N[M] ( V ) were isolated and structurally characterized. In this case, investigations on the NH/PH‐tautomerism were performed exclusively on theoretical level, because the required educts are experimentally non‐accessible due to their kinetic instability.     

High-performance liquid chromatographic analysis of free long chain fatty acids produced during lipolysis by anaerobic digestor sludge

The development of sample extraction techniques in conjunction with application of a modified version of an established HPLC technique allowed the rapid estimation of concentrations of long chain fatty acids (LCFA) produced by the lipolytic activity of bacteria in anaerobic digestor sludges or experiments using the sludges as inocula. It was established that free long chain fatty acids will preferentially partition into certain phases in the sludge or experimental cultures. These data, and application of the developed techniques for monitoring of LCFA, may lead to the avoidance of toxicity and failure of full-scale anaerobic digestors treating high lipid content waste in the future.     

Stereochemistry of isoplagiochin C, a macrocyclic bisbibenzyl from liverworts

Cyclic bisbibenzyls, like isoplagiochins C (1) and D (2), are stereochemically intriguing molecules: Although not equipped with any of the traditional stereogenic elements that render molecules conformationally stable per se, they are sometimes isolated in an optically active form and are thus chiral at room temperature. The paper describes quantum chemical calculations, in particular investigations of the conformational space and molecular dynamics simulations, showing that the helicity is a property of the entire molecule, whose ring strain makes the molecule configurationally stable overall, with (formally) three stereogenic elements (two biaryl axes and one helical stilbene unit). Only one of the biaryl axes (the 'upper' one, joining C-12' and C-14) has a stable configuration, leading to a population of four interconverting diastereomers, yet without racemization at room temperature. On the basis of these conformational and dynamic calculations, the circular dichroism spectrum of isoplagiochin C (1) was calculated, leading to the first assignment of the absolute configuration of a cyclic bisbibenzyl. Accordingly, 1 has the P-configuration at the stereochemically stable biaryl axis and constitutes a mixture of diastereomers with respect to the other biaryl axis and the helical stilbene unit. From the temperature dependence of the racemization rates, an enantiomerization barrier of 101.6 kJ/mol was determined. Likewise, for the first time for cyclic bisbibenzyls, the enantiomeric ratio of this natural product was determined, by chromatography on a chiral phase with CD-coupling. Accordingly, 1 from Plagiochila deflexa is not enantiomerically pure, but occurs in a 85:15 ratio in favor of the enantiomer that has the P-configuration at the stereochemically stable axis.     

Bestimmung der organischen Bestandteile von Aerosolpartikeln aus Reinluft

Zusammenfassung Das für die Untersuchung der organischen Bestandteile von Reinluft-Aerosolteilchen entwickelte Analysenverfahren beruht auf der Kombination von klassischen Trennmethoden mit Verfahren der Dünnschicht- und der Gas-Chromatographie bzw. der Gas-Chromatographie/Massenspektrometrie. Im Gegensatz zu älteren Verfahren werden alle vorkommenden organischen Verbindungen, soweit sie äther-löslich sind bzw. in eine äther-lösliche Form überführt werden können, erfaßt. Die verfahrensbedingten Substanzverluste sind so gering, daß schon 100 mg Aerosolteilchen ausreichend sind für die Analyse der organischen Bestandteile (bei ca. 10% organischer Substanz). Ein Anwendungsbeispiel für das Analysenverfahren wird gegeben. Best. von Organ. Substanzen in Luft; Chromatographie, Dünnschicht/Chromatographie, Gas/Massenspektrometrie; Aerosolbestandteile in Reinluft.

---

Determination of the organic constituents of aerosol particles from clean air

The method developed for analysing the organic matter of atmospheric particles from clean air is based on the combination of classical separation procedures and thinlayer chromatography together with gas chromatography and gas chromatography/mass spectrometry, respectively. In contrast to methods published earlier, all organic compounds present can be detected (if they are or can be converted to compounds soluble in ether). The loss of organic matter inherent in the analytical procedure is small enough to allow the determination of the organic constituents of 100 mg of aerosol particles (with about 10% organic matter). An example for the application of the analytical method is presented.

     

Refinement of borate structures from 11B MAS NMR spectroscopy and density functional theory calculations of 11B electric field gradients

The refinement of borate structures using DFT calculations combined with experimental (11)B quadrupole coupling parameters from solid-state NMR spectroscopy is presented. The (11)B electric field gradient (EFG) tensors, calculated using the WIEN2k software for trigonal and tetrahedral boron sites in a series of model compounds, exhibit a convincing linear correlation with the quadrupole coupling tensor elements, determined from (11)B MAS NMR spectra of the central or satellite transitions. The model compounds include Li(2)B(4)O(7), Mg(2)B(2)O(5), Mg(3)B(2)O(6), NH(4)B(C(6)H(5))(4), and colemanite (CaB(3)O(4)(OH)(3).H(2)O). The (11)B quadrupole moment, Q = 0.0409 +/- 0.0002 barn, derived from the linear correlation, is in excellent agreement with the accepted value for Q((11)B). This demonstrates that DFT (WIEN2k) calculations can provide precise (11)B quadrupole coupling parameters on an absolute scale. On the other hand, DFT calculations based on the reported crystal structures for datolite (CaBSiO(4)(OH)) and danburite (CaB(2)Si(2)O(8)) cannot reproduce the experimental (11)B quadrupole coupling parameters to the same high precision. However, optimization of these structures by minimization of the forces between the atoms (obtained by DFT) results in a significant improvement between the calculated and experimental (11)B quadrupole coupling parameters, which indicates that reliable refinements of the borate structures are obtained by this method. Finally, the DFT calculations also provide important structural information about the sign and orientation of the EFG tensor elements in the crystal frame, a kind of information that cannot be achieved from (11)B NMR experiments on powdered samples.     

Characterization of iron-silicon thin films by means of electron diffraction and X-ray spectroscopy

Iron-silicon thin films have been characterized by means of analytical transmission electron microscopic methods. Under certain conditions — composition and annealing temperature — these films exhibit thermoelectric behavior. In particular, the morphology and phase formation which results from annealing of these films, and doping with oxygen and nitrogen, are of interest. The thermoelectric phase -FeSi₂ is formed at temperatures above 500°C. This phase is transformed into electrically conducting phases at about 1000°C. A small oxygen content does not influence this crystallization process. If the oxygen content is higher than 15 atom-% the electrically conducting phases exist even at 500°C. The presence of a small nitrogen content inhibits the formation of the -FeSi₂ phase. The development of silicon and iron nitrides is possible.     

Alkane loss from collisionally activated alkylmethyleneimmonium ions

The collision-induced dissociation (CID) spectra of five alkylmethyleneimmonium ions (H₂C-N⁺R¹R², (a) R¹ = R² = C₂H₅, (b) R¹ = n-C₃H₇, R² = H, (c) R¹ = n-C₃H₇, R² = CH₃, (d) R¹ = n-C₃H₇, R² = C₂H₅, (e) R¹ = R² = n-C₃H₇) are reported and discussed in terms of the mechanism of alkane loss. The most abundant alkane losses result from 2-azaallylic bond cleavages within R¹ and R² leading to daughter ions of m/z 84. Ion d (R¹ = n-C₃H₇, R² = C₂H₅) was chosen for a deuterium-labelling study because it exhibited methane loss nearly free from interferences with other fragmentations. The methane lost consists to a great extent (95%) of the methyl moiety of R². Whereas the methyl moiety obviously stays intact during the fragmentation process, the hydrogen additionally needed originates from all positions of R¹ and the double-bonded methylene in an approximately random distribution, suggesting extensive hydrogen migrations preceding the transfer step.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Chemical reaction studies in CH4/Ar and CH4/N2 gas mixtures of a dielectric barrier discharge

Chemical reactions in a dielectric barrier discharge at medium pressure of 250-300 mbar have been studied in CH(4)/Ar and CH(4)/N(2) gas mixtures by means of mass spectrometry. The main reaction scheme is production of H(2) by fragmentation of CH(4), but also production of higher order hydrocarbon molecules such as C(n)H(m) with n up to 9 including formation of different functional CN groups is observed. Formation of C(2)H(2), C(2)H(4), and C(2)H(6) molecules has been investigated in some detail. Significant differences are noted in comparison to a theoretical estimate.