Parameters estimation and VLE calculation in asymmetric binary mixtures containing carbon dioxide + n-alkanols

In the present work, the estimation of the parameters for asymmetric binary mixtures of carbon dioxide + n-alkanols has been developed. The binary interaction parameter k₁₂ of the second virial coefficient and non-random two liquid model parameters τ₁₂ and τ₂₁ were obtained using Peng–Robinson equation of state coupled with the Wong–Sandler mixing rules. In all cases, Levenberg–Marquardt minimization algorithm was used for the parameters optimization employing an objective function based on the calculation of the distribution coefficients for each component. Vapor–liquid equilibrium for binary asymmetric mixtures (CO₂ + n-alkanol, from methanol to 1-decanol) was calculated using the obtained values of the mentioned parameters. The agreement between calculated and experimental values was satisfactory.     

Analytical techniques in the study of highly-nitrated nitrocellulose

This work presents an updated overview of the analytical techniques used to study highly-nitrated nitrocellulose, which is used in explosives and is of forensic interest. Most articles published in the past decade were designed:(1) to investigate polymeric parameters of nitrocellulose (e.g., molar mass distribution, viscosity and specific refractive index) by size-exclusion chromatography;(2) to determine the morphological and thermal characteristics of nitrocellulose using thermal and spectroscopic techniques; and,(3) to study the thermal, biological and mechanical degradation of nitrocellulose by thermal, spectroscopic, and mass spectrometric (MS) techniques, alone or coupled to gas chromatography.However, the few papers that focused on the determination of nitrocellulose used in explosives employed analytical techniques [e.g., vibrational techniques (infrared and Raman spectroscopy), MS and ion-mobility spectrometry (IMS) and liquid chromatography (LC) (high-performance LC and ion chromatography)]. Most of the information reported by these techniques has been qualitative. Only quantitative determination of nitrocellulose or its nitrogen content has been performed by measuring the nitrite and/or nitrate ions released from its basic hydrolysis.     

Multivalent binding motifs for the noncovalent functionalization of graphene

Single-layer graphene is a newly available conductive material ideally suited for forming well-defined interfaces with electroactive compounds. Aromatic moieties typically interact with the graphene surface to maximize van der Waals interactions, predisposing most compounds to lie flat on its basal plane. Here we describe a tripodal motif that binds multivalently to graphene through three pyrene moieties and projects easily varied functionality away from the surface. The thermodynamic and kinetic binding parameters of a tripod bearing a redox-active Co(II) bis-terpyridyl complex were investigated electrochemically. The complex binds strongly to graphene and forms monolayers with a molecular footprint of 2.3 nm(2) and a ΔG(ads) = -38.8 ± 0.2 kJ mol(-1). Its monolayers are stable in fresh electrolyte for more than 12 h and desorb from graphene 1000 times more slowly than model compounds bearing a single aromatic binding group. Differences in the heterogeneous rate constants of electron transfer between the two compounds suggest that the tripod projects its redox couple away from the graphene surface.     

Multiclass detection and quantitation of antibiotics and veterinary drugs in shrimps by fast liquid chromatography time-of-flight mass spectrometry

A fast liquid chromatography time-of-flight mass spectrometry (LC-TOFMS) method has been developed for simultaneous quantitative multiclass determination of residues of selected antibiotics and other veterinary drugs (benzalkonium chloride, ethoxyquin, leucomalachite green (LMG), malachite green (MG), mebendazole, sulfadiazine, sulfadimethoxine, sulfamethazine, sulfamethizole, sulfanilamide, sulfapyridine, sulfathiazole and trimethoprim) in shrimps. Different sample treatment methodologies were tested for the extraction of the targeted species based on either liquid partitioning with different solvents, solid-phase extraction or and matrix solid-phase dispersion. The final selected extraction method consisted of solid-liquid extraction protocol using acetonitrile as solvent followed by a clean-up step with primary secondary amine (QuEChERS). Recovery rates for the extraction of the selected multiclass chemicals were in the range 58-133%. Subsequent identification, confirmation and quantitation were carried out by LC-TOFMS analysis using a reverse-phase C₁₈ column with 1.8 μm particle size. The confirmation of the target species was based on accurate mass measurements of the protonated molecules ([M+H]⁺) and their fragment ions, obtaining routine accuracy errors lower than 2 ppm in most cases. The optimized LC-TOFMS method displayed excellent sensitivity for the studied analytes, with limits of detection (LODs) in the range 0.06-7 μg kg⁻¹. Finally, the proposed method was successfully applied to the analysis of 12 shrimp samples collected from different supermarkets, showing the potential applicability of the method for ultratrace detection of these chemicals in such complex matrix.     

Preparation,evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Molecularly imprinted polymer (MIP) for solid extraction and preconcentration of catechins have been successfully prepared by a thermal polymerization method using quercetin as template, 4-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. A solution mixture of acetone and acetonitrile was used as porogen. Systematic investigations of the influence of monomer, cross-linker, porogen, as well as polymerization conditions on the properties of the MIPs were carried out. The quercetin MIPs were evaluated according to their selective recognition properties for quercetin, structurally related compounds (catechin, epigallocatechin gallate and epicatechin) and a unrelated compound of similar molecular size (α-tocopherol). Good binding was observed for quercetin, catechin and epigallocatechin gallate with an optimized MIP in a solid phase extraction system. Adsorption and kinetic characteristics were evaluated for catechins which indicated that the synthesized polymer had high adsorption capacity and contained homogeneous binding sites. Chemical and morphological characterization of the MIP was investigated by FTIR, SEM and BET, which confirmed a high degree of polymerization. Finally, the MIP was successfully applied to the clean-up and preconcentration of catechins from several natural samples.     

Radon determination by activated charcoal adsorption and liquid scintillation measurement

A passive diffusion method for the determination of radon concentration has been optimised and calibrated. The device consists of a scintillation vial containing activated charcoal, a diffusion barrier and a desiccant agent. The response to diverse atmospheric humidity and variable exposure intervals was studied. The result is a detector independent of atmospheric humidity till 7 days of exposure. The method was compared with electret detectors (US EPA) with very satisfactory results. The advantages of this method are its simplicity, low cost, low detection limit, the total automatization of the measurement and its total independence of humidity to measure in a wide range of radon concentrations.     

Synthesis of series of 1- and 3-differently substituted xanthines from imidazoles

A new and general method is described for the synthesis, in three steps and in good overall yields, of tetrasubstituted xanthines from an easily prepared imidazole precursor. The method is especially useful for the preparation in standardized conditions of series of xanthines combining a broad variety of primary or secondary alkyl, benzyl or aryl groups at N1 and of alkyl or arylmethyl groups at N3, that are not readily available by other methods.     

Occurrence and analysis of estrogens and progestogens in river sediments by liquid chromatography-electrospray-mass spectrometry

In this study, an analytical procedure for the determination in sediment of the most abundant and/or physiological active estrogens (estradiol, estriol, estrone, ethynyl estradiol, and diethylstilbestrol) and progestogens (progesterone, norethindrone. and levonorgestrel) is described. The procedure includes ultrasonic extraction of the lyophilized sediment, clean-up with octadecylsilica cartridges, and analysis by liquid chromatography-diode array detection-mass spectrometry (LC-DAD-MS). MS detection is performed with an electrospray interface in the positive ion mode for determination of the progestogens and in the negative ion mode for determination of the estrogens. The method was applied to the determination of the target compounds in river sediments from the area of Catalonia. Estrogens and progestogens were found at concentrations usually in the low ng g(-1) range. Estriol and norethindrone were the compounds most frequently found whereas maximum concentrations in all sediment samples were obtained for ethynyl estradiol (22.8 ng g(-1)) and estrone (11.9 ng g(-1)). Detection limits were in the range of 0.04-1.00 ng g(-1). Preliminary conjectures with regards to the environmental behavior and impact of estrogens and progestogens in rivers are made. To the authors' knowledge, this is the first work reporting a detailed method for the analysis of estrogens and progestogens in river sediments and data on the environmental occurrence of both groups of compounds.     

General approach for the stereocontrolled construction of the beta-lactam ring in amino acid-derived 4-alkyl-4-carboxy-2-azetidinones

The first general approach toward the asymmetric synthesis of 4-alkyl-4-carboxy-2-azetidinones derived from amino acids is described. The stereoselective construction of the beta-lactam ring was achieved through base-mediated intramolecular cyclization of the corresponding N(alpha)-chloroacetyl derivatives bearing (+)- or (-)-10-(N,N-dicyclohexylsulfamoyl)isoborneol as chiral auxiliary (ee up to 82%).     

Optimized determination of calcium in grape juice,wines, and other alcoholic beverages by atomic absorption spectrometry

This paper describes a study of the different methods of sample preparation for the determination of calcium in grape juice, wines, and other alcoholic beverages by flame atomic absorption spectrometry; results are also reported for the practical application of these methods to the analysis of commercial samples produced in Spain. The methods tested included dealcoholization, dry mineralization, and wet mineralization with heating by using different acids and/or mixtures of acids. The sensitivity, detection limit, accuracy, precision, and selectiviy of each method were established. Such research is necessary because of the better analytical indexes obtained after acid digestion of the sample, as recommended by the European Union, which advocates the direct method. In addition, although high-temperature mineralization with an HNO3-HCIO4 mixture gave the best analytical results, mineralization with nitric acid at 80 degrees C for 15 min gave the most satisfactory results in all cases, including those for wines with high levels of sugar and beverages with high alcoholic content. The results for table wines subjected to the latter treatment had an accuracy of 98.70-99.90%, a relative standard deviation of 2.46%, a detection limit of 19.0 microg/L, and a determination limit of 31.7 microg/L. The method was found to be sufficiently sensitive and selective. It was applied to the determination of Ca in grape juice, different types of wines, and beverages with high alcoholic content, all of which are produced and widely consumed in Spain. The values obtained for Ca were 90.00 +/- 20.40 mg/L in the grape juices, 82.30 +/- 23.80 mg/L in the white wines, 85.00 +/- 30.25 mg/L in the sweet wines, 84.92 +/- 23.11 mg/L in the red wines, 85.75 +/- 27.65 mg/L in the rosé wines, 9.51 +/- 6.65 mg/L in the brandies, 11.53 +/- 6.55 mg/L in the gin, 7.3 +/- 6.32 mg/L in the pacharán, and 8.41 +/- 4.85 mg/L in the anisettes. The method is therefore useful for routine analysis in the quality control of these beverages.