Shift reagent 1H NMR study of methoxycoumarins

The complete assignment of the proton chemical shifts of coumarin ( 1 ), all monomethoxy derivatives and the six possible dimethoxyl substituted compounds at the aromatic ring was achieved at 60 MHz in a quantitative study utilizing Pr(fod)₃ as the shift reagent. It was found that in addition to the complexation at the lactone carbonyl a second interaction of the lanthanide shift reagent occurs when two methoxyl groups are found in an ortho distribution. The results are discussed in comparison to data published for flavones in the presence of Pr(fod)₃ shift reagent.     

Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Kinetics and mechanism of elimination of methoxyphenethyl chlorides in the gas phase

The kinetics for the gas phase elimination of o-and m-methoxy-2-phenylethyl chlorides have been investigated over the temperature range of 390-464°C and pressure range of 38–119 Torr. The reactions in seasoned vessels and in the presence of the free radical inhibitor propene, are homogeneous and unimolecular and follow a first-order rate law. The o-anisyl and p-anisyl substituents at the -position of ethyl chloride assist anchimerically the elimination processes. The formation of a cyclic product, benzodihydrofuran, from o-methoxy-2-phenylethyl chloride suggests an intimate ion pair mechanism operating in this reaction.

---

- --2- 390–464°C 38–119 . - , , , . - - - . , , --2- , .

     

Holo- and hemidirected lead(II) in the polymeric [Pb(4)(mu-3,4-TDTA)2(H2O)2]*4H2O complex. N,N,N',N'-tetraacetate ligands derived from o-phenylenediamines as sequestering agents for lead(II)

The coordinating ability of the ligands 3,4-toluenediamine-N,N,N',N'-tetraacetate (3,4-TDTA), o-phenylenediamine-N,N,N',N'-tetraacetate (o-PhDTA), and 4-chloro-1,2-phenylenediamine-N,N,N',N'-tetraacetate (4-Cl-o-PhDTA) (H4L acids) toward lead(II) is studied by potentiometry (25 degrees C, I = 0.5 mol x dm(-3) in NaClO4), UV-vis spectrophotometry, and 207Pb NMR spectrometry. The stability constants of the complex species formed were determined. X-ray diffraction structural analysis of the complex [Pb4(mu-3,4-TDTA)4(H2O)2]*4H2O (1) revealed that 1 has a 2-D structure. The layers are built up by the polymerization of centrosymmetric [Pb4L2(H2O)2] tetranuclear units. The neutral layers have the aromatic rings of the ligands pointing to the periphery, whereas the metallic ions are located in the central part of the layers. In compound 1, two types of six-coordinate lead(II) environments are produced. The Pb(1) is coordinated to two nitrogen atoms and four carboxylate oxygens from the ligand, whereas Pb(2) has an O6 trigonally distorted octahedral surrounding. The lead(II) ion is surrounded by five carboxylate oxygens and a water molecule. The carboxylate oxygens belong to four different ligands that are also joined to four other Pb(1) ions. The selective uptake of lead(II) was analyzed by means of chemical speciation diagrams as well as the so-called conditional or effective formation constants K(Pb)eff. The results indicate that, in competition with other ligands that are strong complexing agents for lead(II), our ligands are better sequestering agents in acidic media.     

Pyrrolodiazines. 2. Structure and Chemistry of Pyrrolo[1,2-a]pyrazine and 1,3-Dipolar Cycloaddition of Its Azomethine Ylides

A new synthesis of the pyrrolo[1,2-a]pyrazine system from pyrrole is described. In light of the ab initio calculations carried out on this heterocyclic system some of its basic chemistry was investigated and included electrophilic substitution, addition of organolithium reagents, metalation with lithium diisopropylamide and subsequent reaction with electrophiles, and formation of salts by quaternization of the nonbridgehead nitrogen. N-ylides obtained from these salts undergo 1,3-dipolar cycloaddition with suitable dipolarophiles to give dipyrrolo[1,2-a]pyrazines, pyrazolo[1,5-a]-pyrrolo[2,1-c]pyrazines, and heterobetaines. Examples of intramolecular 1,3-dipolar cycloadditions are also reported.     

Kováts' coefficients for predicting polarities in silicone stationary phases and their mixtures

Summary A correlation between the retention polarity and the Kováts' coefficient has been found for a number of commercial stationary phases used in gas chromatography. The correlation has been used to predict the polarity of a few mixed stationary phase columns prepared as binary mixtures of OV-101 with OV-25, DC-550 or Carbowax 20M, and also mixtures of OV-225 with SP-2340. A linear relationship was found between polarity and mixture composition. The temperature dependence of the Kováts' coefficient was investigated and found to increase linearly with temperature, the rate of increase depending on the polarity of the stationary phase, with greater increases for more polar stationary phases.     

The effect of the trifluoropropyl group in polysiloxane stationary phases used for capillary gas chromatography

Four poly(methyl 3,3,3-trifluoropropyl siloxanes) with trifluoro-propyl group content (group substitution) between 8 and 35 percent have been synthesized and characterized as stationary phases for gas chromatography in borosilicate glass capillary columns. Results are compared with those from two commercial stationary phases–a polydimethylsiloxane and a poly(methyl 3,3,3-trifluoropropyl siloxane) with a fifty percent trifluoropropyl group content (group substitution). Retention index values, McReynolds constants, polarity (as defined by McReynolds) and retention polarity (as defined by Takács) increase regularly with the trifluoropropyl group content of the stationary phase. The temperature coefficient of the retention indices of the McReynolds probes, and that of the polarities, have been determined at temperatures between 60 and 180 °C. Specific retention volumes do not follow the linear dependence on trifluoropropyl group content observed for retention indices or polarities. Substances with electron-donor groups show maximum retention for a trifluoropropyl group content of ca 30%, whereas the retention of hydrocarbons, halogenated compounds, and alcohols decreases as the degree of trifluoropropyl group substitution increases from 0 to 50%. It is felt that a polysiloxane with a trifluoropropyl group content of ca 30 to 35% would be the best choice for the separation of ketones, nitro compounds or amines.     

Physical Properties of Binary Alcohol + Ionic Liquid Mixtures at Several Temperatures and Atmospheric Pressure

In this study, densities and speeds of sound were measured over the whole composition range, at T = (298.15, 303.15 and 308.15) K and p = 0.1 MPa, for the binary systems of ethanol, or 1-propanol, or 2-propanol and 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, or 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide. The density and speed of sound data were used to calculate the corresponding excess molar volumes and excess molar isentropic compressions, which were fitted with the Redlich–Kister equation. From the obtained results, a discussion was carried out in terms of interactions and structure factors in these binary mixtures.