Laser nanosources based on planar photonic crystals as new platforms for nanophotonic devices

Two-dimensional photonic crystal lasers have been fabricated on III–V semiconductor slabs. Tuning of the spontaneous emission in micro and nanocavities has been achieved by accurate control of the slab thickness. Different structures, some of them of new application to photonic crystal lasers, have been fabricated like the Suzuki-phase or the coupled-cavity ring-like resonators. Laser emission has been obtained by pulsed optical pumping. Optical characterization of the lasing modes have been performed showing one or more laser peaks centred around 1.55 μm. Far field characterization of the emission pattern has been realized showing different patterns depending on the geometrical shape of the structures. These kinds of devices may be used as efficient nanolaser sources for optical communications or optical sensors.     

Lagrangian Duality in Set-Valued Optimization

In this paper, we study optimization problems where the objective function and the binding constraints are set-valued maps and the solutions are defined by means of set-relations among all the images sets (Kuroiwa, D. in Takahashi, W., Tanaka, T. (eds.) Nonlinear analysis and convex analysis, pp. 221–228, 1999). We introduce a new dual problem, establish some duality theorems and obtain a Lagrangian multiplier rule of nonlinear type under convexity assumptions. A necessary condition and a sufficient condition for the existence of saddle points are given. The authors thank the two referees for valuable comments and suggestions on early versions of the paper. The research of the first author was partially supported by Ministerio de Educación y Ciencia (Spain) Project MTM2006-02629 and by Junta de Castilla y León (Spain) Project VA027B06.     

Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

A real time method for surface cleanliness measurement

The measurement of surface cleanliness is a significant problem in many industrial and technological processes. Existing methods are based on laboratory procedures, that are not performed in real time, can not be automated, and usually are restricted to a small portion of the sample. In this study we describe a new method for real time measurement of the amount of surface dirt or contamination deposited on a surface. It relies on the ablation of the surface dirt film by means of a short laser pulse, and the subsequent measurement of the emitted sound. The intensity of the sound is proportional to the amount of surface dirt and provides a direct measurement of the cleanliness of the surface. We also developed a reference sample for calibration, based on a uniform distribution of dots printed on white paper. The density and the dot size can be easily modified providing a homogeneous, uniform and reproducible standard for the measurement. Based on this method, we designed, developed and patented the first industrial instrument for on-line determination of the degree of cleanliness of manufactured cold rolled steel plate bobbins. PACS 79.20.D; 81.70.C; 42.62.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

Cathodoluminescence study of extended defects in hydrothermal ZnO crystals

Understanding the luminescence of ZnO is very important for some applications. In spite of the many studies carried out, there are still some points concerning the origin of some of the luminescence emissions in ZnO crystals that require additional study; in particular, the role of extended defects remains to be a matter of controversy. We present here a cathodoluminescence analysis of the defects generated by Vickers indentation in hydrothermal HTT crystals. Special emphasis was paid to the luminescence band peaking around 3.3 eV. The origin of this band is a matter of controversy, since it has been related to different causes, extended defects being one of the candidates for this emission. The CL images were acquired around crystal defects. It is observed that the 3.3 eV emission is enhanced around the crystal defects; though it is also observed, but weaker, out of the defect regions, which suggests that there exist two luminescence emissions peaking very close to 3.3 eV. The two emissions, one related to structural defects and the other to the LO phonon replica of the free excitonic band, appear very close each other and their relative intensity should determine the shape of the spectrum.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

The Role of a Specific Response of Media in the Vavilov-Cherenkov Effect

It is shown that the condition υ > υ_p (ω), which is necessary in order to trigger the Vavilov-Cherenkov effect, determines the interval of radiated frequencies and it alone cannot establish a strong restriction to the velocity of the particle. It is exhibited that it is possible to define a general lower bound for the velocity of the particle, which does not depend on the frequency when both, a specific response of the medium is taken into account and the mentioned condition is considered. The minimum value of the phase velocity of light in the medium determines the existence of such general lower bound.     

Hyperfine characterization of Bi1.9Te0.1SrNb1.9Hf0.1O9

The Aurivillius type oxide Bi_1.9Te_0.1SrNb_1.9Hf_0.1O₉ has been studied by Perturbed Angular Correlations spectroscopy using ¹⁸¹Ta probes. The spin precession curves were measured from room temperature up to 873 K. Two sites are occupied by probes and the temperature dependence of both indicates a continuous phase transition at about 625 K. One site is ordered while the other is disordered. This situation is analyzed in terms of simple models already applied to perovskites. The transition temperature of the solid solution Bi_2−xTe_xSrNb_2−xHf_xO₉ (with 0≤x≤0.5) shows a strong dependence on composition.     

Reactions on the dimethylphenylbenzacridinones. VI. Hydrogenation of ortho-nitrophenyl derivatives

Catalytic hydrogenation of o-nitrophenylbenz[a], benz[c], dibenz[a,h] and dibenz[a,g]acridinones using Pd/C as catalyst, at 60 psi of pressure, gave the hiterto unknown benzoquinoacridine N-oxides and benzo-pyranonaphthyridine N-oxides. The structure of all products was corroborated by ir, ¹H- and ¹³C-nmr and mass spectra data.