Flow injection manifolds for liquid-liquid extraction without phase separation assisted by ultrasound

Flow injection (FI) manifolds based on iterative change of the flow direction have been designed to study the influence of auxiliary energy on continuous liquid-liquid extraction without phase separation and compare it with the non-assisted process in a single experiment. In order to demonstrate the utility of ultrasounds as auxiliary energy for the extraction of polyphenols from an organic phase, the approach has been applied to samples of extra virgin olive oil, using an alkaline aqueous phase as extractant and subsequent derivatization with the Folin-Ciocalteu reagent. The proposed method provides results similar to those from the official method-recoveries between 97 and 100%. The sensitivity of the proposed method is 3.5 times higher than that of the non-ultrasound-assisted method. The precision, expressed as relative standard deviation (R.S.D.) for n=5, was within 1-5% and the relative errors for the irradiated and non-irradiated method were within 3 and 5%, respectively. The repeatability and within-laboratory reproducibility, studied at two concentration levels (379 and 813 μg ml⁻¹) ranged between 0.7-4.4% and 0.6-4.8%, respectively. The proposed manifolds can also be applied to either other type of auxiliary energies—microwave, thermal—or two different types of auxiliary energies at the same time.     

New Hg2+ and Cu2+ selective chromo- and fluoroionophore based on a bichromophoric azine

[graph: see text] A new probe, 1,4-bis(1-pyrenyl)-2,3-diaza-1,3-butadiene, selectively senses Hg2+ and Cu2+ through two different channels: the yellow-deep-pink color change and the enhancement of the fluorescence with the red shift of the excimer emission, which can visually be discernible by a green fluorescence in the presence of Hg2+ and an orange fluorescence in the presence of Cu2+.     

Direct determination of copper and zinc in cow milk, human milk and infant formula samples using electrothermal atomization atomic absorption spectrometry

Infant formula and powdered milk samples were suspended in a medium containing 20% ethanol, 0.65% nitric acid, 6% hydrogen peroxide and 0.1% ammonium dihydrogenphosphate and directly introduced in the electrothermal atomizer. Liquid milk samples were diluted with this suspension solution. The build-up of carbonaceous residues inside the atomizer was avoided by using a combination of hydrogen peroxide and nitric acid. Fast programs were used to simplify the heating cycles. Calibration was carried out using aqueous standards and the detection limits for copper and zinc were found to be 70 and 15 pg, respectively. The metal contents of several milk samples obtained by direct introduction of the samples agree with those obtained by means of a conventional procedure based on the total dissolution of the samples. The reliability of the methods was also confirmed by analyzing three certified reference materials. The free and protein binding fractions were measured by ultrafiltration membrane permeability of the milk samples.     

Electron beam crosslinking of non-lead PVC formulations

PVC samples with lead-free and lead-base stabilizer, containing TMPTMA (trimethylolpropane trimethacrylate) as a crosslinker and DOP (2-ethylhexyl phthalate) as a plasticizer, were electron beam treated at different doses (2–200 kGy) and characterized to evaluate crosslinking and other several properties, as a continuation of our previously reported paper, where these PVC formulations, typical for wire and cable applications, underwent gamma irradiation. The PVC was formulated with two different stabilizing systems: Ca/Zn and dibasic lead phthalate for comparison, to use them as jackets for a 22 wire gage (AWG). Small samples of the jacketed wires were irradiated in an industrial Dynamitron electron accelerator for the corresponding doses, along with two dosimetric systems: radiochromic thin film and alanine pellets dosimeters. The maximum dose applied was decided as the crosslinking increased, until the gel content was stable. The dose of 200 kGy was the condition for the highest crosslinking, so most of the wire was irradiated at such dose. Chemical and mechanical evaluations were carried out to the irradiated wire. The results show that 200 kGy was too high dose for the materials, since an important degradation is observed for the Ca/Zn systems. Unfortunately, such dose affects basically to CaZn formulations, which showed much poorer performance than classical lead-containing compositions. The results also indicate that gel content is not the best way of deciding the optimum condition for irradiation.     

Coupled-column liquid chromatography method with photochemically induced derivatization for the direct determination of benzoylureas in vegetables

The coupled-column (LC-LC) system, consisting of a first column packed with internal surface reversed phase (ISRP) (50 x 4.6mm ID) and a Chrompack C18 (100 x 4.6 mm ID) as second column, allowed the simultaneous determination of five benzoylurea insecticides in dichloromethane (CH2Cl2) extracts of vegetable samples without any clean-up step. This system was combined with a photochemically induced fluorescence (PIF) post-column derivatization in order to provide strongly fluorescent photoproducts from the non-fluorescent benzoylureas. Limits of detection ranged from 0.21 to 0.98 microg L(-1) of pesticide (equivalent to 0.14-0.65 microg kg(-1) in vegetable samples) and limits of determination ranged from 4.0 to 10.0 microg L(-1) (equivalent to 2.7-6.7 microg kg(-1)). Linearity of the method was established between 2 and 1800 microg L(-1), depending upon the compound. Validation of the total method was performed by randomly analyzing recoveries of four vegetable samples (aubergine, cucumber, green bean, and tomato) spiked at two levels of concentration (10.0 and 33.3 microg kg(-1)). The combination of the LC-LC system with PIF detection provides a sensitive, selective, and rapid method for the determination of pesticides in vegetable samples at levels lower than the maximum residue levels (MRLs) established for these compounds by Spanish legislation.     

Determination of fungicide residues in fruits by coupled-column liquid chromatography

Coupled-column liquid chromatography with fluorescence detection was applied to the determination of o-phenylphenol and bitertanol residues in orange and banana fruits. After extraction with a mixture of acetone, dichloromethane-petroleum ether, and ethyl acetate, an extract aliquot of 100 microL was injected directly without any additional clean-up into the chromatographic system using two reversed phase C18 coupled columns. The LC-LC approach allowed automated sample clean up of the vegetal extracts, leading to a simple and rapid analytical procedure, with limits of quantification between 0.01 and 0.05 mg kg(-1). Recovery experiments performed on orange and banana samples fortified at different concentrations (0.01 - 4 mg kg(-1)) gave average recoveries between 70 and 113% with relative standard deviations lower than 15%. The procedure developed was finally applied to orange and banana samples from different geographical locations and the results were confirmed by GC-MS.     

Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.