In search of new resonance structures in dissociative photoionization of H2

We present a theoretical study of dissociative photoionization of H₂ via the ¹Π_u symmetry in the photon energy range 30–43 eV. Our results explain the various peaks observed in the experiments below 40 eV and illustrate, in particular, the important role of the ²Π_u(2pπ_u) ionization threshold. At higher photon energies, they suggest the existence of new resonance structures that may be associated with doubly excited states of H₂ lying above the third and fourth ionization thresholds (the Q₃ and Q₄ resonance series). From the calculated resonance parameters, we conclude that the dominant mechanism at high photon energies should involve the Q₄ (and probably higher) doubly excited states of H₂. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2002     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Automatic determination of total aliphatic amines by on-line photometric liquid-liquid microextraction

An automatic flow method for the determination of total aliphatic amines has been developed. Using an integrated micro extraction unit at the detection point that allows continuous on-line monitoring of small organic plug from which amines are extracted. It is based on the formation of ion-pairs between aliphatic amines and sodium 1,2-naphthoquinone-5-sulphonate that are subsequently extracted into chloroform. The gradual enrichment of the organic phase with the ion-pair is continuously monitored at 460 nm. Absorbance readings at a fixed time and the slopes of absorbance-time recordings are the measured parameters used for determination purposes. The proposed method has been applied to the determination of total aliphatic amines in both synthetic and real (food) samples.     

Flow injection flame atomic absorption spectrometry for slurry atomization: Determination of manganese, lead, zinc, calcium, magnesium, iron, sodium and potassium in cements

A flame atomic absorption spectrometric procedure for the rapid determination of manganese, lead, zinc, calcium, magnesium, iron, sodium and potassium in cements is described. For minor components, slurries are prepared in the 0.05–0.25% m/v range by direct suspension of the samples in a medium containing 2% v/v nitric acid, 2% hydrofluoric acid and 30% v/v glycerol. 50–200 l aliquots are injected in a simple flow injection manifold using water as the carrier. When determining major components, the FI manifold includes an easy-to-construct variable volume chamber allowing the on-line dilution of the suspensions. The degree of dilution can be easily modified to obtain signals within the linear response range of the instrument. Aqueous standards are used for calibration. The data obtained for six cements agree with those obtained by conventional procedures based on the compl ^M v£e ^w ete dissolution of the samples.     

Cis‐trans Isomerism in Copper(II) Complexes with N‐acyl Thiourea Ligands

The N‐acyl thiourea complexes bis[N,N‐diethyl‐N′‐(p‐nitrobenzoyl)‐thioureato]copper(II) ( 1a,1b ) and bis(N,N‐diphenyl‐N′‐benzoylthioureato)copper(II) ( 2a,2b ) crystallize in each case in two modifications. X‐ray structural analysis shows that 1a and 1b are cis‐trans isomers. This is very unusual for N‐acyl thioureato complexes because with exception of one platinum(II) complex up to now only cis complexes have been found. In contrast X‐ray structural analysis of both forms 2a and 2b of the other complex shows no cis‐trans pair. Both modifications are cis complexes. In solution both isomers of the copper(II) complexes are observable by EPR spectroscopy.     

A minimal multiconfigurational technique

A direct minimization method previously presented by the authors is applied here to biconfigurational wave functions. A very moderate increasing in the time by iteration with respect to the one-determinant calculation and good convergence properties have been found. So qualitatively correct studies on singlet systems with strong biradical character can be performed with a cost similar to that required by Hartree-Fock calculations.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Experimental analysis and modified rotor description of the infrared fundamental band of HCl in Ar, Kr, and Xe solutions

We report an experimental study of the rotovibrational fundamental PQR-band shapes in the IR absorption spectra of HCl dissolved in condensed rare gases in a wide range of temperatures. The effective vibrational frequencies are determined from analysis of the fine rotational structure partially resolved in the band wings. The central Q-branch components appear redshifted with respect to the effective vibrational frequencies, their shifts in different solvents found to match the HCl stretching mode shifts in binary Rg...HCl van der Waals heterodimers. Theoretical quasi-free rotor and modified rotor models are applied to describe evolution of the band profiles at changing thermodynamic conditions. Both models are shown to reproduce equally well the observed spectral density distributions in the band wings. However, the modified rotor formalism that accounts for depopulation of the lower-energy rotational solute states provides better agreement with the experiment in the range of the P- and R-branch maxima. We surmise that the Q branches separated from the measured spectral profiles are formed by transitions between rotationally hindered states of diatomic molecules coupled to the solvent by the local anisotropy of the interaction potential.     

Crystal structure of potassium tetramethylammonium hexacyanocobaltate(III) trihydrate: K3(Me4N)3[Co(CN)6]2·3H2O

The structure of K₃(Me₄N)₃[Co(CN)₆]₂·3H₂O has been determined from three-dimensional X-ray diffraction data. The unit cell is formed by parallel layers of cobalt octahedra [CoC₆] and potassium octahedra, [K(1)N₅O(1)], separated byc/2. In each layer both types of octahedra are located alternatively. The [MeN₄]⁺ tetrahedra are located in the cavities between the two layers of octahedra. The crystal structure of this compound is the first example of its type. TMC 2483