HPLC-Electrochemical detection with graphite-poly (tetrafluoroethylene) electrode Determination of the fungicides thiram and disulfiram

The suitability of composite graphite-poly(tetrafluoroethylene) (Teflon) electrodes as amperometric indicator electrodes in HPLC detection is demonstrated. The determination of the fungicides thiram and disulfiram in the presence of ziram has been chosen as an analytical problem. The optimization of working conditions, such as the choice of the organic solvent used in the mobile phase as well as its percentage, the potential applied to the composite electrode, and the time elapsed between mixing the carbamates and the injection, has been accomplished by using the wall-jet flow-cell configuration. The effect of the acetonitrile percentage used in the mobile phase on the retention of thiram, disulfiram, ziram and phenol was evaluated. Resolution up to the baseline can be achieved with 45% acetonitrile. The sensitivity of the determination of thiram and disulfiram in the presence of a constant concentration of ziram is slightly better when using a wall-jet cell; however, the background current is higher, as well as the baseline noise and the time necessary to achieve stabilization of the baseline before the injection. Lower limits of detection for both fungicides, as well as a better repeatability, were obtained when using a thin-layer flow cell configuration. As an application, the determination of thiram in spiked apple samples, at a level of 0.5 mg thiram kg(-1) apple, has been carried out with a mean recovery of 97 +/- 3% for a significance level of 0.05.     

Solubility and first hidrolysis constants of europium at different ionic strength and 303 K

The solubility of europium at 0.02M, 0.1M and 0.7M NaClO₄ ionic strength solutions was determined by a radiometric method and pEu_s-pC_H diagrams were obtained. Hydrolysis constants were also determined at the same ionic strengths by pH titration and the values found were log *₁ = -7.68±0.11, -8.07±0.10 and -8.20±0.11. The log K _sp values were -23.5±0.2, -22.7±0.2 and -21.9±0.2 for 0.02M, 0.1M and 0.7M NaClO₄ ionic strengths, respectively, at 303 K under CO₂-free conditions and the extrapolated value at zero ionic strength was log K _sp ⁰ = -24.15. The working pC_H ranges for the calculation of the hydrolysis constants were selected from the pEu_s-pC_H diagrams in the region where precipitation of europium oxide or hydroxide was less than 20%. Europium removal from aqueous solutions with zeolites was explored.     

Synthesis of beta-lactams by Ag+-induced ring expansion of 1-hydroxycyclopropylamines: a theoretical analysis

A theoretical analysis of the silver-induced ring expansion of N-chloro-N-methyl-1-hydroxycyclopropylamine to form N-methyl-2-azetidinone, and of the Cl(-) elimination from this substrate without Ag(+) assistance, was performed using the B3LYP method and the 6-31+G(d) basis set for C, N, O, H, and Cl atoms and the relativistic effective core pseudopotential LANL2DZ complemented with one set of f polarization functions (zeta(f) = 0.473) for the Ag atom. The partial Ag(+)-assisted extrusion of Cl(-) at the rate-determining transition state provokes an important change in the nodal properties of the frontier molecular orbitals of the H(3)CClNCOHAg(+) fragment, thus making very stabilizing HOMO-LUMO interactions between this fragment and the C(2)H(4) moiety possible. This interaction leads to the ring opening and release of most of the strain energy, giving rise to a low energy barrier for the process. Also, by assisting the Cl(-) extrusion, Ag(+) avoids the elimination of the hydroxyl hydrogen atom, which would provoke the fragmentation of the system instead of the formation of the beta-lactam.     

Simple and rapid micellar electrokinetic capillary chromatographic method for simultaneous determination of four antiepileptics in human serum

A very rapid and simple MEKC method was developed for the simultaneous determination of four antiepileptic drugs, ethosuximide (Etho), primidone (Pri), phenytoin (Pht) and carbamazepine (Cbz) in human serum. Sample analysis required only 100 microL of human serum which only needed to be centrifuged, decanted and combined with the running buffer [5.3 mM Na(2)HPO(4)/3.2 mM borax buffer (pH 9.5) containing 55 mM SDS and 3.5% (v/v) acetone]. The analysis was performed in only 10 min into fused-silica capillaries (57 cm total length with 50 microm i.d. and 50 cm to the detector) using the MEKC methodology with diode-array detection at 220 nm. The calibration graphs were established for ethoximide, primidone, phenytoin and carbamazepine between 0 and 20 mg/L. Recoveries were between 85 and 87%. The simplicity of the proposed methodology makes it suitable for routine clinical use, especially for epileptic patients on polytherapy.     

Information content of data and variables and types of weighting in least-squares regression methods

Algorithms are given for evaluating the relative amount of useful information related to a particular parameter which is carried by individual data points and intervals of the variables. The algorithms provide an efficient means of using the information contained in a set of data. Applications to the optimization of weighting in regression methods are described. Several informational and combined informational-statistical types of weighting are studied as a means of improving the accuracy and precision of the parameters obtained by non-linear regression.     

Synthesis,Characterization and Magnetic Properties of New Dinuclear Copper(II) Complexes with N,N′‐Disubstituted Dithiooxamides derived from α‐Amino Acids

Four new dinuclear copper(II) complexes have been synthesized and have the general formula [Cu₂(L)(H₂O)₂], where L = GLYDTO [N,N′‐bis(carboxymethyl)dithiooxamide], ALADTO [N,N′‐bis(carboxyethyl)dithiooxamide], VALDTO [N,N′‐bis(1‐carboxy‐2‐methylpropyl)dithiooxamide] and LEUDTO [N,N′‐bis(1‐carboxy‐3‐methylbutyl)dithiooxamide]. The complexes were characterized by elemental analysis as well as by IR, electronic and EPR spectroscopy. These techniques provided evidence for the presence of the CuNO₂S chromophore. Magnetic susceptibility measurements on all the complexes in the range 4–300 K show the existence of a dominant antiferromagnetic interaction with ?J values greater than 300 cm^?1. Thermal decomposition behaviour of the complexes was studied by thermogravimetry.     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

Spectrafluorimetric method for the rapid screening of toxic heavy metals in water samples

A fast and inexpensive sensitive screening test for recognising potential wastewater contamination by the presence of highly toxic heavy metals is described. The test is based on the reaction of the toxic heavy metals Hg(II), Cd(II), Pb(II) and Ag(I) with 6-mercaptopurine (6-MP) to produce highly fluorescent complexes.Optimum experimental conditions include a buffer of pH 7.2 (0.1 M citric acid/0.2 M Na₂HPO₄), a chelating reagent concentration of 6×10⁻⁴ M and the addition of 10⁻⁴ M of o-phenanthroline. The fluorescence emitted by the complexes was measured at 380 and 540 nm for excitation and emission wavelengths, respectively.Detection limits of 4, 3, 6 and 3 μg l⁻¹ were achieved for Hg, Cd, Pb and Ag. Relative standard deviation (R.S.D.) were between ±2 and ±6% of the fluorescence signals for five identical samples. Potential interference effects from other heavy metals (Zn, Mn, Co, Fe, Ni and Cu), which could affect the response of the proposed screening test was investigated. Results showed that none of these metals give rise to noticeable fluorescence signals under the above described experimental conditions.Finally, the capability of the proposed heavy metal screening test for the analysis of contaminated water samples is discussed.     

Room-temperature liquid phosphorimetry of the aluminium-ferron chelate in micellar media : Determination of aluminium

Aluminium reacts with 7-iodo-8-quinolinol-5-sulphonic acid (Ferron) in cetyltrimethylammonium bromide (CTAB) micelles to form a highly phosphorescent complex at room temperature. Suitable experimental conditions and the phosphorescent characteristics of the complex are described. Comparison with the results obtained for the phosphorescent niobium-Ferron complex in CTAB micelles helps to elucidate the mechanism of this type of phosphorescence. For aluminium the detection limit is 5.4 ng ml^?1; the relative standard deviation is 4.5% for 20 μg Al. The method is applied to aluminium determination in waters and dialysis fluids.     

Analytical applications of the o-dianisidine-persulfate reaction: Kinetic determination of silver and cobalt

A kinetic method for the silver determination based on the catalytic effect of Ag(I) on the oxidation of o-dianisidine by persulfate at pH = 4.5 in the presence of 1,10-phenanthroline is proposed. Ag(I) can be determined by measuring the absorbance of the reaction product at 450 nm, using the fixed time method. Co(II) does not have a catalytic effect in the reaction, but in the simultaneous presence of silver and cobalt the reaction shows an induction period the length of which is related to the Ag/Co molar ratio. As a consequence, two new methods for the determination of cobalt and silver using the induction period method are proposed. The two methods for silver are applied to the determination of silver in lead.