2D H and C NMR conformational studies of thienopyridines and carboline biarylic compounds

In this paper, we report on conformational studies of biarylic compounds, as prepared through the well-known aza-Wittig methodology. The conformational studies were mainly realized by bidimensional (2D) nuclear magnetic resonance spectroscopy (NMR) and NOESY experiments. The conformational behavior showed that these biarylic compounds display an orthogonal symmetry and adopt a characteristic arrangement around the pivotal bond. Molecular modeling calculations were performed to support structure conformations.     

Direct Synthesis of a Photoactive Inorganic–Organic Mesostructured Hybrid Material and its Application as a Photocatalyst

A direct route : Silylated triphenylmethanol is incorporated into mesoporous material MCM‐41 through a direct synthesis method. Under acidic conditions, this inorganic–organic hybrid generates trityl cations to give the photoactive material Tyl‐MCM41. Tyl‐MCM41 promotes the photosensitized dimerization of 1,3‐cyclohexadiene with an unprecedented selectivity towards the formation of the exo product (see scheme).

     

Analysis of polybrominated diphenyl ethers in sewage sludge by matrix solid‐phase dispersion and isotope dilution GC–MS

A method for the determination of 14 polybrominated diphenyl ethers (PBDEs) in sludge from wastewater treatment plants is presented. PBDEs were extracted by matrix solid‐phase dispersion assisted by sonication and determined by isotope dilution gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode, using labelled ¹³C‐PBDEs as internal standards. The limits of detection and quantification for the tri‐ to hepta‐BDEs were in the range of 0.05 to 0.5 ng/g dry weight and 0.15 to 1.8 ng/g dry weight, respectively, and 1.6 ng/g dry weight and 5.6 ng/g dry weight for deca‐BDE‐209. The proposed analytical method was applied to determine PBDE levels in sewage sludge samples collected from 19 water treatment plants located in the province of Madrid (Spain). In all of the examined samples, BDE‐100 and BDE‐154 were the main compounds found with a mean concentration of 3.9 and 2.0 ng/g, respectively. PBDEs were detected in all of the samples, and their total concentrations not considering BDE‐209 were between 3.9 and 23.0 ng/g dry weight. The dominant PBDE congener in sewage sludge was BDE‐209, which constituted 38.7 to 97.3% of the total, and showed concentration levels ranging from 8.1 to 717.2 ng/g dry weight.     

Sequential stir bar extraction,thermal desorption and retention time locked GC–MS for determination of pesticides in water

A method based on sequential stir bar sorptive extraction followed by automated thermal desorption–GC–MS for the determination of pesticides in underground and superficial water samples has been developed. Retention time locked GC–MS and deconvolution Automated Mass Spectral Deconvolution and Identification System software allows the use of pesticide databases for identification and quantification in routine applications. Quantitation limits and repetitivity using full scan mass spectrometric determination guarantee the applicability of the method, which enables considerable savings to be made in total analysis time, with data processing times of around 2 min/sample.     

Photo-oxidative degradation mechanisms in styrene-ethylene-butadiene-styrene (SEBS) triblock copolymer

The photo-oxidative degradation of poly[styrene-b-ethylene-co-butylene-b-styrene], SEBS, has been studied at wavelengths cut-off below 290 nm, and monochromatic light of 254 nm and 365 nm, using a variety of spectroscopic methods including FTIR, UV and luminescence spectroscopy coupled with crosslinking and hydroperoxide analyses in order to understand the mechanisms involved. A study on polystyrene photodegradation is also compared at varying wavelengths in order to provide an understanding of the light sensitivity of the styrene vs the aliphatic phases in the SEBS. The increase in colour shows evidence for the presence of visible light absorbing chromophores. Hydroperoxide analysis reflects a rapid increase in the hydroperoxide concentration in the olefinic phase. Fluorescence spectroscopy shows a rapid disruption of the polystyrene excimers coupled with the formation of long-wavelength emitting polyconjugated stilbene-type chromophores. Phosphorescence analysis indicates the presence of acetophenone groups while GPC and sol/gel analysis showed that degradation occurs mainly due to chain scission. Changes in the FTIR spectra of the photo-oxidised samples show a predominant absorption associated with carboxylic acids and/or aliphatic esters at 1712 cm⁻¹. Other species such as hydroperoxides, ketones and α,β-unsaturated carbonyls are also formed and mechanisms are proposed.     

Diatropicity of tetraazanaphthalenes

Tetraazanaphthalenes are diatropic molecules, whose magnetic response to a magnetic field perpendicular to the molecular plane closely resembles that of naphthalene. The out-of-plane component of the magnetic susceptibility tensor and its strong anisotropy can be used as quantifiers of magnetic aromaticity. Maps showing streamlines and modulus of the current density field provide clear evidence for diatropicity of these systems. They also explain the strong anisotropy of carbon and nitrogen magnetic shielding, which is determined by the big out-of-plane component of the nuclear shielding tensor. The electronic ring currents observed in the map deshield the nuclei of ring hydrogens by enforcing the local magnetic field and diminishing the out-of-plane component of proton shielding.     

Heparin coating durability on artificial heart valves studied by XPS and antithrombin binding capacity

The durability and functionality of a heparin coating on artificial heart valve leaflets were evaluated with X-ray photoelectron spectroscopy (XPS) and by the coatings' capacity to bind antithrombin. Current methods for accelerated life-time testing are based on exposing leaflets to water solutions. In this paper a method is explored, in which heart valve leaflets were exposed to a continuous high shear rate (4 L/min) of human citrated plasma. It was found that the heparin coating was stable and wear resistant enough to still be present after 3 weeks and to have about the same antithrombin uptake as coatings not exposed to circulating plasma. It was, however, partly destroyed by the test as found using XPS. We suggest that heparin chains from the upper layer of heparin have been torn off from the carrier chain, in combination with loss of heparin conjugate and plasma deposition in patches. This study showed that XPS provides additional information to biological measurements such as antithrombin uptake. XPS is therefore a valuable technique not only to characterize biomaterials but also to evaluate the effect of a performance test.     

High structural control in metal-mediated synthesis of new functionalized diphosphines using diphosphinoketenimines as precursors

The diphosphinoketenimine ligand in the neutral complexes fac-[MnI(CO)(3){(PPh(2))(2)C=C=NR}] (1 a: R = Ph; 1 b: R = p-tolyl) undergoes nucleophilic attack by MeLi and nBuMgCl yielding, after hydrolysis, the diphosphinoenamine-containing complexes fac-[MnI(CO)(3){(PPh(2))(2)C=C(R')NHR}] (3 a,b: R' = Me; 4 a,b: R' = nBu). Complex 1 a reacts under the same conditions with H(2)C=C=CHMgBr to afford fac-[MnI(CO)(3){(PPh(2))(2)C=C(CH(2)CC[triple chemical bond]CH)NHR}] (5 a), which contains a terminal alkyne group on the alpha-carbon atom of the diphosphinoenamine ligand. The cationic complexes fac-[Mn(CO)(4){(PPh(2))(2)C=C=NR}](+) (6) react with H(2)C=C=CHMgBr to afford diphosphinomethanide derivatives bearing three different types of functional groups, depending upon the substituent on the nitrogen atom of the ketenimine: cumulene in fac-[Mn(CO)(4){(PPh(2))(2)C--C(CH=C=CH(2))=N-xylyl}] (7 d), internal alkyne in fac-[Mn(CO)(4){(PPh(2))(2)C--C(C[triple chemical bond]CCH(3))=NtBu}] (8), and quinoline in 9 (R = Ph), whose formation implies an unusual cyclization process. Protonation of 7 d, 8, and 9 with HBF(4) occurs at the nitrogen atom to give the cationic derivatives 10 d, 11, and 12, respectively, which contain the corresponding functionalized diphosphine ligands. Irradiation of 3 a,b and 4 a,b with Vis/UV light makes it possible to isolate the free ligands (PPh(2))(2)C=C(R')NHR (13 a,b and 14 a,b), completing the metal-assisted synthesis of these novel functionalized diphosphines. Irradiation of 12 with Vis/UV light generates free phosphinoquinoline ligand 15, which readily affords a complex 16 containing 15 as a P,N-chelating ligand when treated with [PdCl(2)(NCMe)(2)], thus demonstrating its coordination capability.     

Hybrid organic semiconductors including chalcogen atoms in pi-conjugated skeletons. Tuning of optical, redox, and vibrational properties by heavy atom conjugation

In this work, the interactions between heteroatoms (S, Se, and Te) and conjugated skeletons are analyzed. The study is carried out by using electronic absorption and fluorescence spectroscopies, electrochemistry, vibrational Raman spectroscopy, and theoretical calculations in the framework of DFT and TD-DFT theories. Optical spectra are described in terms of one-electron promotions between orbitals around the energy gap. Electrochemistry, in the framework of the Koopman's approach, is also interpreted. The vibrational Raman spectra are assigned to molecular modes and the evolution changing the heteroatom is addressed and an effective tuning of these properties is found. Part of this modulation is associated with local electronic interactions depending on the relative S, Se, and Te electronegativities. Unconventional long-range heteroatom-heteroatom interactions have been proposed which arise from the existence of effective pi-conjugated channels. The molecular level understanding of structure-property relationships in these organic/inorganic semiconductors are of great interest in the interdisciplinary area of material science.     

Photoinduced addition of phthalimide to unactivated alkynes

Photoexcited phthalimide in equilibrium with its conjugated base produces the regioselective hydrophthalimidation of conjugated alkynes. The vinylphthalimide thus obtained is hydrolyzed to the corresponding carbonyl compound. With unconjugated alkynes, the outcome is a double addition of phthalimide to the triple bond. The reaction is assumed to take place via single electron transfer from either the alkyne or the phthalimide anion to the excited phthalimide as the primary photoprocess.