Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

Competitive decay at two- and three-state conical intersections in excited-state intramolecular proton transfer

We demonstrate the existence of a simultaneous degeneracy (not required by symmetry) of three electronic states in malonaldehyde. This is one of the first reports of such a triple degeneracy involving S0, S1, and S2 in a molecule with a closed-shell ground state. We further report on a two-state S2/S1 conical intersection which is higher in energy than the three-state intersection, but closer to the Franck-Condon point. First-principles quantum dynamics calculations of the photochemistry after excitation to S2 show that there is a competition between these intersections, with more than half of the population decaying to S1 through the higher energy S2/S1 intersection. Surprisingly, much of the population which makes it to the triple degeneracy point is not funneled directly to S0, but rather remains trapped on S1. We attribute this to the large dimensionality of the branching plane at a three-state intersection (the degeneracy is lifted along at least five distinct molecular displacements).     

Comparison of the Temperature Effect on the π∗←n and π∗←π Electronic Transition Bands of NO<Subscript>3</Subscript><Superscript>−</Superscript>(aq)

The effect of temperature on the π∗←π transition band in the UV absorption spectrum of NO₃⁻(aq) centered at ≈200 nm was studied in the temperature range 10–70 ^∘C. The observed temperature independence of this band was in contrast to the significant influence of temperature on the nitrate π∗←n transition reported recently by us. However, taking into account the electronic states involved in both the transitions, it was concluded that this finding was in accordance with our previous assumption that interconversion between spectrally distinct (with respect to π∗←n band) nitrate species included the rupture/formation of hydrogen bond(s) in the hydration shell of the nitrate ion.     

[Ru(DMSO)4]Cl2 catalyzes the α-alkylation of ketones by alcohols

The electrophilic α-alkylation of ketones with alcohols was accomplished by a [Ru(DMSO)₄]Cl₂ catalyzed process, water being the only wasted material. The reaction can be successfully governed to produce either the expected ketones or their related alcohols only by changing the reaction conditions. When 2-aminobenzyl alcohol was used, a cyclization process took place to yield 2,3-disubstituted quinolines.     

Rapid screening method for the determination of diethylstilbestrol in edible animal tissue by column liquid chromatography with electrochemical detection

A rapid and sensitive screening method for the determination of residues of diethylstilbestrol in edible animal tissue is described. The analyte was extracted from the tissue with tert.-butyl methyl ether, reextracted with 1 M sodium hydroxide and further cleaned up by solid-phase extraction with C18 cartridges. Analysis was performed by isocratic elution with a phosphate-buffered mobile phase, methanol-0.05 M phosphate buffer pH 3.5 (67:33), on a Nucleosil 5-microns C18 column with electrochemical detection at +0.90 V. The average recovery of trans-diethylstilbestrol in spiked samples is 66%, with a standard deviation of 14% (n = 22) in the range 0.5-2.0 microgram/kg. The detection limit is 0.1-0.2 microgram/kg, although at this level other compounds may interfere and give rise to false positive results.     

Pulse plating effect on microstructure and corrosion properties of Zn–Ni alloy coatings

The influence of pulse plating parameters on the surface morphology, grain size, lattice imperfection and corrosion properties of Zn–Ni alloy has been studied. The coatings were electrodeposited in an alkaline cyanide-free solution. AFM was applied for surface morphology examination, XRD measurements were carried out for phase composition and texture analysis, electron probe microanalysis was used for alloy chemical composition studies, while electrochemical techniques were applied for corrosion performance evaluation. The pulse plated Zn–Ni coatings appeared to consist of the γ-Zn₂₁Ni₅ phase and the composition of the alloy depended on the plating parameters. The grain size, lattice imperfection and homogeneity of grain distribution were established to be the main factors determining corrosion behaviour of the coating. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.     

Development and prevalidation of a method for phenol determination by solid-phase spectrophotometry

A simple, sensitive and rapid solid-phase spectrophotometric procedure was developed for the determination of traces of phenol with 4-aminoantipyrine as a reagent (AAP-SPS), and the optimal experimental conditions were established. This method was performed by sorption and direct absorbance measurements of the product phenol-AAP sorbed on the anion-exchanger Dowex 1-X4 (0.2 g) at 495 nm (absorption maximum) and 700 nm (non-absorption wavelength). The sensitivity offered by the AAP-SPS procedure was higher by a factor of 40 compared with the respective conventional spectrophotometric method. Metrological characteristics were established using a prevalidation strategy. The AAP-SPS procedure is characterized by a linear calibration function in the working range of 0.05–0.50 μmol, low standard deviation of procedure (±0.012), low limit of determination (0.021 μmol), and favorable random (±0.85 to ±11.27%) and systematic deviations (−4.55 to +11.50%). Moreover, the accuracy of the system investigated by the recovery test is acceptable (99–102%). Favorable working and performance characteristics make the new SPS method ideal for phenol monitoring in pharmaceutical preparations as well as other matrices.