Sequential injection extraction based on restricted access material for determination of furosemide in serum

Restricted access material (RAM) column containing 25 microm C18 alkyl-diol support was integrated into the sequential injection analysis (SIA) manifold and the SIA-RAM system was tested for direct determination of furosemide in serum. LiChrospher ADS column based on restricted access material is proposed to direct injection of biofluids. The integration of RAM material into SIA enabled creation of a comprehensive on-line sample clean-up technique combined with fluorescence quantitation of analyte. Centrifuged and diluted serum sample was aspirated into the system and loaded onto the column using acetonitrile-water (2:98), pH 2.7. The analyte was retained on the column while proteins contained in the sample were removed to the waste without precipitation and clogging the column. Interfering substances complicating the detection were washed out by acetonitrile-water (15:85), pH 2.7 in the next step. The extracted analyte was eluted by means of acetonitrile-water (25:75), pH 2.3 to the fluorescence detector (emission filter 385 nm). The whole procedure comprising sample pre-treatment, analyte detection and column reconditioning took 20 min. The recoveries of furosemide from serum lay between 101.4 and 103.4% for three concentrations of analyte.     

Semihard scattering unraveled from collective dynamics by two-pion azimuthal correlations in 158A GeV/c Pb+Au collisions

Elliptic flow and two-particle azimuthal correlations of charged hadrons and high-p(T) pions (p(T)>1 GeV/c) have been measured close to midrapidity in 158A GeV/c Pb+Au collisions by the CERES experiment. Elliptic flow (v(2)) rises linearly with p(T) to a value of about 10% at 2 GeV/c. Beyond p(T) approximately 1.5 GeV/c, the slope decreases considerably, possibly indicating a saturation of v(2) at high p(T). Two-pion azimuthal anisotropies for p(T)>1.2 GeV/c exceed the elliptic flow values by about 60% in midcentral collisions. These nonflow contributions are attributed to nearside and back-to-back jetlike correlations, the latter exhibiting centrality dependent broadening.     

DNA Hydrolysis by Homo- and Heteronuclear Cu(II)–Ni(II) Complexes of Two Diester-type Ligands

Summary. Nucleolytic activities of novel mononuclear Cu(II), homo- and heterodinuclear Cu(II)–Ni(II) complexes with two diester-type ligands were investigated on pCYTEXP by neutral agarose gel electrophoresis. The analyses of the cleavage products obtained electrophoretically indicate that the examined complexes induce very similar conformational changes on supercoiled DNA by converting supercoiled form to nicked form. At concentrations greater than 100M, the complexes possessed effective nucleolytic activities for 10min of incubation time. However, their nucleolytic activities did not increase significantly with longer periods of incubation. The pH-nucleolytic activity profiles of the complexes differed significantly. Metal complex induced DNA cleavage was also tested for inhibition by various radical scavengers. It could be proposed from the data that diffusible intermediate oxidants are not involved in these reactions or they are not necessary for DNA cleavage since none of antioxidants inhibited DNA cleaving activities of the complexes.     

Experimental and theoretical evidence for long-lived molecular hydrogen anions H2- and D2-

The existence of (metastable) molecular hydrogen anions H2(-), D2(-), and H3(-) is demonstrated. These anion species were produced by sputtering of TiH2 and TiD2 targets with Cs+ ions and were identified by accelerator mass spectrometry. From the respective flight times through the spectrometer, lifetimes for H2(-) and D2(-) of at least 3 micros and 4 micros, respectively, can be inferred. Theoretical calculations within the nonlocal resonance model predict the existence of highly rotationally excited anions with lifetimes in the micros range. It is proposed that in sputtering molecular hydrogen species with high rotational and vibrational excitation are formed that are stable on the time scale of the experiment.     

Potentiometric determination of iron with DTPA in the presence of a large amount of aluminium

Potentiometric determination of iron with DTPA at pH 1.6 (platinum and calomel electrodes) permits determination of iron in the presence of aluminium up to an Al:Fe ratio of 70. Aluminium is determined indirectly by addition of excess of DCTA, adjustment to pH 5, and back-titration with iron(III) chloride.     

Theoretical possibilities of a solenoid as mass filter

The paper deals with equations of motion of ions in a time-dependent magnetic field of a solenoid. These lead to a Hill equation approximated by a Mathieu equation. The instability of solutions of these equations in certain regions implies a theoretical possibility of filtering ion beams according to masses.     

Determination of adenosine deaminase and purine nucleoside phosphorylase activities using high-performance liquid chromatographic and radiochromatographic methods

Two methods for the determination of adenosine deaminase and purine nucleoside phosphorylase activities were compared. The high-performance liquid chromatographic (HPLC) technique used separation on a reversed-phase silica column and exhibited adequate sensitivity and a markedly higher rate of analysis compared with that of the paper radiochromatographic method. Correlation analysis of the results obtained by the two methods on a set of lymphoid cells from 25 patients with lympho-proliferative disorders confirmed the utility of the HPLC technique in clinical investigations.     

Interpolymer complexes based on the core/shell micelles. interaction of polystyrene-block-poly(methacrylic acid) micelles with linear poly(2-vinylpyridine) in 1,4-dioxane water mixtures and in aqueous media

The size and structural changes of nanoparticles formed after the addition of poly(2-vinylpyridine), PVP, to block copolymer micelles of polystyrene-block-poly(methacrylic acid), PS-PMA, were studied by light scattering and atomic force microscopy. Due to the strong hydrogen bonding between PVP and PMA segments, complex structures based on the core/shell micelles form in mixed selective solvents. As proven by a combination of light scattering and atomic force microscopy, individual PS-PMA micelles are "glued" together by PVP chains. The dialysis against solvents with a high content of water results in transient increase in polydispersity and turbidity of originally clear solutions. However, the precipitated polymer material dissolves in basic buffers and stable soluble nanoparticles reform in aqueous media. The behavior of their solutions was studied in a broad pH range by light scattering, atomic force microscopy and capillary zone electrophoresis.     

Simulations of vibrational spectra from classical trajectories: calibration with ab initio force fields

An algorithm allowing simulating vibrational spectra from classical time-dependent trajectories was applied for infrared absorption, vibrational circular dichroism, Raman, and Raman optical activity of model harmonic systems. The implementation of the theory within the TINKER molecular dynamics (MD) program package was tested with ab initio harmonic force fields in order to determine the feasibility for more extended MD simulations. The results suggest that sufficiently accurate frequencies can be simulated with integration time steps shorter than about 0.5 fs. For a given integration time step, lower vibrational frequencies ( approximately 0-2000 cm(-1)) could be reproduced with a higher accuracy than higher-frequency vibrational modes (e.g., O-H and C-H stretching). In principle, the algorithm also provides correct intensities for ideal systems. In applied simulations, however, the intensity profiles are affected by an unrealistic energy distribution between normal modes and a slow energy relaxation. Additionally, the energy fluctuations may cause weakening of the intensities on average. For ab initio force fields, these obstacles could be overcome by an arbitrary normal mode energy correction. For general MD simulations, averaging of many shorter MD trajectories started with randomly distributed atomic velocities provided the best spectral shapes. alpha-pinene, D-gluconic acid, formaldehyde dimer, and the acetylprolineamide molecule were used in the tests.