Ultrafast gas chromatography coupled to electronic nose to identify volatile biomarkers in exhaled breath from chronic obstructive pulmonary disease patients: A pilot study

An analytical method to identify volatile organic compounds (VOCs) in the exhaled breath from patients with a diagnosis of chronic obstructive pulmonary disease (COPD) using a ultrafast gas chromatography system equipped with an electronic nose detector (FGC eNose) has been developed. A prospective study was performed in 23 COPD patients and 33 healthy volunteers; exhalation breathing tests were performed with Tedlar bags. Each sample was analyzed by FCG eNose and the identification of VOCs was based on the Kovats index. Raw data were reduced by principal component analysis (PCA) and canonical discriminant analysis [canonical analysis of principal coordinates (CAP)]. The FCG eNose technology was able to identify 17 VOCs that distinguish COPD patients from healthy volunteers. At all stages of PCA and CAP the discrimination between groups was obvious. Chemical prints were correctly classified up to 82.2%, and were matched with 78.9% of the VOCs detected in the exhaled breath samples. Receiver operating characteristic curve analysis indicated the sensitivity and specificity to be 96% and 91%, respectively. This pilot study demonstrates that FGC eNose is a useful tool to identify VOCs as biomarkers in exhaled breath from COPD patients. Further studies should be performed to enhance the clinical relevance of this quick and ease methodology for COPD diagnosis.     

A characteristic redox reaction for N,N′-thiobisamines and some other S(II) compounds

The reaction of copper(II) perchlorate hexahydrate with a number of sulphur(II) compounds in acetonitrile as solvent were studied. It is found that SCl₂, N,N′-thiobisamines S(NR₂)₂, ethoxythiomorpholineC₂H₅O-S-N

and pentacarbonyl (thiobismorpholine) chromium(O)[Cr(CO)₅·S(N

O)₂]reduce Cu(II) with formation of the complex Cu[(CH₃CN)₄]CIO₄ and SO₂.     

Cyclopentane-1,3-dione bis(4-methylthiosemicarbazone) monohydrochloride as a spectrophotometric reagent for the determination of chlorate in perchloric acid medium

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride produces colored solutions with chlorate ions in strongly acid medium. The yellow color obtained has been used to propose a spectrophotometric method of C10₃^? determination in the concentration range 0.5–6.0 ppm (molar absorptivity 1.26 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 397 nm).     

Interference of ruthenium red analogues at photosystem II of spinach thylakoids

The effect of ruthenium red analogues on several thylakoid photosynthetic activities has been investigated. RR, RV, RRPh1, RRPh2 and Ph inhibit ATP synthesis and electron flow from water to MV (basal, phosphorylating and uncoupled) as their concentration increases, thus, they act as a Hill reaction inhibitor. They inhibit uncoupled electron transport through PSII from water to DCPIP and partially from DPC to DCPIP. However, these compounds do not affect uncoupled PSI electron transport from DCPIP to MV. Therefore, the target of interaction is at the level of OEC and the span P(680) to Q(A) for RR, RRPh1 and RRPh2. Chlorophyll a fluorescence studies corroborate the already found interference sites and may affect the disconnection between chlorophyll molecules within the LHCII and/or between antennae and RCs, or decreases the exciton to reach the RC and inhibition of PSII occurs. RRPh2 is six times more active than RR. Finally, Ph inhibits electron flow interacting at the level of Q(B).     

Selectivity of Several Liquid Phases for the Separation of Pine Terpenes by Gas Chromatography

Chromatographic retention data and thermodynamic properties of six pine terpenes (α-pinene, β-pinene, camphene, limonene, α-phellandrene and p-cymene) on six different liquid phases, with a wide range of polarity, are reported at temperatures from 80 to 120 °C. The retention behaviour and selectivity of liquid phases for the separation of binary solute systems are discussed in terms of activity coefficients and specific interactions. Solubility parameters for the liquid phases are reported using the regular solution theory and the Takamiya equation and a good correlation between polarity and solubility parameters is observed.     

1,n-Diamines. Part 3: Microwave-assisted synthesis of N-acyl-N′-arylhexahydropyrimidines and hexahydro-1,3-diazepines

In this Letter we present a method for the synthesis of N-acyl-N′-arylhexahydropyrimidines 1, by ring closure of N-acyl-N′-aryl-1,3-propanediamines 3 with formaldehyde. Cyclodehydrations were performed in aqueous medium under microwave irradiation, and led to high yields of the desired compounds in remarkably short reaction times. The method also allowed for the synthesis of hitherto unreported N-acyl-N′-arylhexahydro-1,3-diazepines 2. The acyclic tetramethylenic precursors 4 were synthesized by selective functionalization of N-arylputrescines.     

Room-temperature liquid phosphorimetry of the aluminium-ferron chelate in micellar media : Determination of aluminium

Aluminium reacts with 7-iodo-8-quinolinol-5-sulphonic acid (Ferron) in cetyltrimethylammonium bromide (CTAB) micelles to form a highly phosphorescent complex at room temperature. Suitable experimental conditions and the phosphorescent characteristics of the complex are described. Comparison with the results obtained for the phosphorescent niobium-Ferron complex in CTAB micelles helps to elucidate the mechanism of this type of phosphorescence. For aluminium the detection limit is 5.4 ng ml^?1; the relative standard deviation is 4.5% for 20 μg Al. The method is applied to aluminium determination in waters and dialysis fluids.     

Novel combination of non-aqueous capillary electrophoresis and multivariate curve resolution-alternating least squares to determine phenolic acids in virgin olive oil

This paper presents the development of a non-aqueous capillary electrophoresis method coupled to UV detection combined with multivariate curve resolution-alternating least-squares (MCR-ALS) to carry out the resolution and quantitation of a mixture of six phenolic acids in virgin olive oil samples. p-Coumaric, caffeic, ferulic, 3,4-dihydroxyphenylacetic, vanillic and 4-hydroxyphenilacetic acids have been the analytes under study. All of them present different absorption spectra and overlapped time profiles with the olive oil matrix interferences and between them. The modeling strategy involves the building of a single MCR-ALS model composed of matrices augmented in the temporal mode, namely spectra remain invariant while time profiles may change from sample to sample. So MCR-ALS was used to cope with the coeluting interferences, on accounting the second order advantage inherent to this algorithm which, in addition, is able to handle data sets deviating from trilinearity, like the data herein analyzed. The method was firstly applied to resolve standard mixtures of the analytes randomly prepared in 1-propanol and, secondly, in real virgin olive oil samples, getting recovery values near to 100% in all cases. The importance and novelty of this methodology relies on the combination of non-aqueous capillary electrophoresis second-order data and MCR-ALS algorithm which allows performing the resolution of these compounds simplifying the previous sample pretreatment stages.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.