Highly regioselective rearrangement of 2-substituted vinylepoxides catalyzed by gallium(III) triflate

Gallium(III) triflate catalyzed the rearrangement of 2-substituted vinylepoxides into beta,gamma-unsaturated carbonyl compounds with high regio- and chemoselectivity (>97/3) in low catalyst loading (1-5 mol %). The alkyl-substituted trimethylsilylvinyl epoxides gave beta,gamma-unsaturated ketone, but aryl-substituted vinylepoxides gave the aldehydes instead.     

Asymmetric synthesis of cis-5-tert-butylproline with metal carbenoid NH insertion

The highly stereoselective intramolecular metal carbenoid insertion reaction of sulfinimine-derived delta-amino alpha-diazoesters is used to prepare cis-5-tert-butylproline. A concerted or nearly concerted metal carbenoid N-H insertion reaction mechanism is proposed.     

相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。     

过氧化氢与N—甲基苯胺盐酸盐引发体系的研究

在水介质中,研究了新型的过氧化氢/N-甲基苯胺盐酸盐引发体系对 AM 与 PVA 的接枝共聚。产物经紫外光谱、红外光谱和 ~1H-核磁共振进行表征,并提出了引发机理。     

连续一级反应的热动力学研究

本文把时间比法引入热动力学研究,建立了连续一级反应的热动力学研究法,并用来研究了一个连续反应体系的热动力学,验证了该方法的正确性.     

Self-gelatinizable copolymer immobilized glucose biosensor based on prussian blue modified graphite electrode

A novel poly(vinyl alcohol) grafting 4-vinylpyridine self-gelatinizable copolymer was adapted to immobilize glucose oxidase. The reduction of hydrogen peroxide (H2O2) was detected at a Prussian Blue (PB) modified graphite electrode. A stable and sensitive glucose amperometric biosensor is described. The copolymer is a good biocompatible polymer in which the glucose oxidase retains high activity. Moreover, the copolymer can adhere firmly to the inorganic PB membrane. The sensor showed an apparent Michaelis-Menten constant of 18 +/- 0.2 mM and a maximum current density of 1.14 microA cm-2 mM-1. The linear range is from 5 microM to 4.5 mM glucose and the detection limit is 0.5 microM glucose. The catalytic efficiency of PB for the reduction of H2O2 is higher than that for the oxidation of H2O2. Glucose concentrations in serum samples from healthy persons and diabetic patients were determined using the sensor. The results compared well with those provided by the hospital using a spectroscopy method.     

TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

Simple interface for capillary electrophoresis-inductively coupled plasma atomic emission spectrometry

A simple interface has been developed to couple capillary electrophoresis (CE) to inductively coupled plasma atomic emission spectrometry (ICP-AES) for metal speciation. A concentric glass nebulizer with elongated tip is used as the CE-ICP interface. The CE capillary is the central tube of the nebulizer. A platinum wire is wrapped across the exit end of the CE capillary to provide electrical connection to the CE power supply. No sheath flow of buffer solution is needed. A simple cooling system has also been developed. A peristaltic pump circulates water through a plastic tube that encloses the section of the CE capillary between the CE instrument and the ICP spectrometer. Characteristics of the CE-ICP interface, e.g., elution time, nebulization and transport efficiency and peak broadening, versus carrier gas flow-rate have been studied. Comparisons to a previous design with the Pt electrode inserted into the end of the CE capillary are made where appropriate. The reproducibility (RSD) in ICP emission intensity of the system is <4%. Detection limits of Cr and Cu are approximately 5 ng/ml.