鸟嘌呤、鸟苷、鸟苷酸的电化学石英晶体微天平研究

利用电化学石英晶体微天平(EQCM)研究了鸟嘌呤、鸟苷和鸟苷酸在金电极上的电化学行为.结果表明,三种生物活性分子均能在1.1V电位被氧化,对应于它们所含的共同基团嘌呤环中CN键的氧化,根据氧化反应电量和质量的变化,求得电子转移数为4.氧化电流的大小次序为鸟苷酸>鸟苷>鸟嘌呤,这可能与三者在电极上的吸附量不同有关.     

高效液相色谱法测定米根霉乳酸发酵液中乳酸的光学纯度

 以 2 ,3,6 三甲基 β 环糊精作手性流动相添加剂 ,C18柱为固定相 ,考察了流动相的pH和手性流动相添加剂浓度对乳酸对映体分离度的影响 ,建立了DL 乳酸的拆分定量分析方法。用归一化法分析DL 乳酸时引入了定量校正因子 ,确定了外标法测定L 乳酸的回归方程、精密度和回收率。测定了米根霉L 乳酸发酵液中D 型异构体的质量分数及其随放置时间的变化情况。     

沸石分子筛在高岭土微球上的生长

 通过不同的合成方法,在高岭土微球上生长了沸石分子筛P与沸\r\n石分子筛KSO1的混合物、单一沸石分子筛KSO1和小晶粒沸石分子筛Y,\r\n并用多种物理手段如X射线衍射、电子显微镜和固体核磁共振波谱等对\r\n合成样品进行了表征．     

Synthesis of a New β-Mercaptoalcohol

Mercaptoalcohols are a rare class of natural products. Some optically active mercaptoalcohols have been used as catalysts in asymmetric reduction of prochiral Ketone1,2. In this letter, we report the synthesis of a new optically active (-mercaptoalcohols, (R)-1,1-diphenyl-2-mercapto-3-methyl-1-butanol 7, from L- valine.Our first attempt is showed in Scheme 1. According to literature's method L-valine was converted to (S)-2-Hydroxy-3-methylbutanoic acid 21,2. 2 was treated with MeOH/SOCl2…     

铈诱导悬浮培养的东北红豆杉细胞发生凋亡

以悬浮培养的东北红豆杉（Taxus cuspidata)细胞为材料,加入一定浓度的Ce^4 ,在不同培养时间取样,超薄切片透射电镜观察发现细胞核膜完整,染色质凝聚,趋边化,核酸电泳显示DNA发生特异性降解并形成阶梯状电泳条带（DNA ladder); 应用TUNEL检测方法发现DNA的3′－OH断端可被特异性标记。Ce^4 能诱导东北红豆杉细胞发生凋亡。     

基于普鲁士蓝(PB)膜修饰铂电极的葡萄糖传感器的研究

在制备PB膜修饰铂盘电极的基础上,利用修饰电极对过氧化氢的电催化还原特性,得到了性能优良的葡萄糖传感器。作者系统地考察了有关修饰膜制备和测试实验条件对传感器性能的影响,结果表明传感器的最佳工作电位是0．05V,测试溶液的最适PH值为6．5,在选定的工作条件下,传感器的检测灵敏度为80nA/mmol.L^-1,线性范围为0．1－5mmol.L^-1,响应时间为1．5min,寿命在1个月以上,表观米氏常数为21mmol.L^-1。本方法制得的传感器能有效消除抗坏血酸,尿酸的干扰,有望用于血液中葡萄糖的直接测定。     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

A Traveling Wave Ion Mobility Spectrometry (TWIMS) Study of the Robo1-Heparan Sulfate Interaction

Roundabout 1 (Robo1) interacts with its receptor Slit to regulate axon guidance, axon branching, and dendritic development in the nervous system and to regulate morphogenesis and many cell functions in the nonneuronal tissues. This interaction is known to be critically regulated by heparan sulfate (HS). Previous studies suggest that HS is required to promote the binding of Robo1 to Slit to form the minimal signaling complex, but the molecular details and the structural requirements of HS for this interaction are still unclear. Here, we describe the application of traveling wave ion mobility spectrometry (TWIMS) to study the conformational details of the Robo1-HS interaction. The results suggest that Robo1 exists in two conformations that differ by their compactness and capability to interact with HS. The results also suggest that the highly flexible interdomain hinge region connecting the Ig1 and Ig2 domains of Robo1 plays an important functional role in promoting the Robo1-Slit interaction. Moreover, variations in the sulfation pattern and size of HS were found to affect its binding affinity and selectivity to interact with different conformations of Robo1. Both MS measurements and CIU experiments show that the Robo1-HS interaction requires the presence of a specific size and pattern of modification of HS. Furthermore, the effect of N-glycosylation on the conformation of Robo1 and its binding modes with HS is reported.

Open image in new window

Graphical Abstract ?

     

Synthesis,crystal structures and DNA/human serum albumin binding of ternary Cu(II) complexes containing amino acids and 6‐(pyrazin‐2‐yl)‐1,3,5‐triazine‐2,4‐diamino

Two water‐soluble 6‐(pyrazin‐2‐yl)‐1,3,5‐triazine‐2,4‐diamino (pzta)‐based Cu(II) complexes, namely [Cu(l ‐Val)(pzta)(H₂O)]ClO₄ ( 1 ) and [Cu(l ‐Thr)(pzta)(H₂O)]ClO₄ ( 2 ) (l ‐Val: l ‐valinate; l ‐Thr: l ‐threoninate), were synthesized and characterized using elemental analyses, molar conductance measurements, spectroscopic methods and single‐crystal X‐ray diffraction. The results indicated that the molecular structures of the complexes are five‐coordinated and show a distorted square‐pyramidal geometry, in which the central copper ions are coordinated to N,N atoms of pzta and N,O atoms of amino acids. The interactions of the complexes with DNA were investigated using electronic absorption, competitive fluorescence titration, circular dichroism and viscosity measurements. These studies confirmed that the complexes bind to DNA through a groove binding mode with certain affinities (K_b = 4.71 × 10³ and 1.98 × 10³ M^?1 for 1 and 2 , respectively). The human serum albumin (HSA) binding properties of the complexes were also evaluated using fluorescence and synchronous fluorescence spectroscopies, indicating that the complexes could quench the intrinsic fluorescence of HSA in a static quenching process. The relevant thermodynamic parameters revealed the involvement of van der Waals forces and hydrogen bonds in the formation of complex–HSA systems. Finally, molecular docking technology was also used to further verify the interactions of the complexes with DNA/HSA.     

A facile approach for constructing nitrogen-doped carbon layers over carbon nanotube surface for oxygen reduction reaction

Fabricating nitrogen-doped carbon layers over the conductive substrate is a cost-effective and efficient approach to develop practical oxygen reduction reaction (ORR) catalyst. In the current work, relying on the commercially available carbon nanotube (CNT), nitrogen-doped carbon layers over CNT is constructed by annealing the in situ formed complex over the CNT surface derived from iron ion inducing diaminonaphthalene (DAN) polymerization and DAN self-polymerization. Physical and electrochemical characterizations are carefully conducted to comparatively analyze the structure and activity relationship. The significance of iron in constructing nitrogen-doped carbon layers and tuning active sites of N types over multiwall carbon nanotube for ORR is demonstrated by X-ray photoelectron spectroscopy and Raman scattering spectrum. The excellent performance of nitrogen-doped carbon layers over CNT (catalyzed by iron) towards ORR is displayed by rotating ring-disk electrode. Specifically, the onset potential, half-wave potential, and limiting current density are 0.961 V, 0.831 V, and 5.20 mA cm^?2 respectively, very close to the state-of-the-art commercial Pt/C catalyst. Both high surface area and efficient N active sites should be considered in the nitrogen-doped carbon materials design and fabrication for ORR. Considering the large-scale availability, it has significant value in fuel cells commercial applications.