3D photon counting imaging at 1550 nm with 1.5-GHz sine-wave-gated InGaAs/InP GAPD

We demonstrated a 3D laser imaging system at 1550 nm with a 1.5-GHz sine-wave gated Geiger-mode InGaAs/InP avalanche photodiode (APD). An optical fiber bundle with 100 individual fiber outputs was implemented at the focal plane of the telescope, providing a 2.5-mrad imaging view. The system used single-pixel near-infrared single-photon detector to measure photons at fiber outputs instead of a photon counting array. The 1.5-GHz gated Geiger-mode InGaAs/InP APD with a timing jitter of 290 ps was operated in quasi-continuous mode with detection efficiency of ∼4.3%. We achieved higher than 6-cm surface-to-surface resolution at single-photon level, showing a potential of low-energy and eye-safe laser imaging system for long-distance measurements.     

Study on Biological Safety of Polyvinyl Alcohol/Collagen Hydrogel as a Tissue Substitute (II)

Physically crosslinked polyvinyl alcohol/collagen composite hydrogels were prepared by a cyclic freezing-drying technique. The biological properties of the hydrogels, including hemolysis, anaphylaxis, pyrogen and acute systemic toxicity tests and implantation in-vivo, were investigated. The hemolysis test suggested that the polyvinyl alcohol/collagen, with a hemolysis index of 1.19%, did not have an obvious hemolysis reaction. There was no toxicosis or death cases observed in the acute systemic toxicity test, and the hydrogel showed no anaphylaxis or pyrogen response. The composite hydrogel showed a good histological compatibility in the in-vivo study. The results indicated that the polyvinyl alcohol/collagen composite hydrogels have promising applications for pharmaceutical and biomedical fields.     

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

金属性二维过渡金属硫化物的溶剂热合成及电催化析氢性能

采用溶剂热法制备了多种二维过渡金属硫化物(TMDCs), 在合成过程中通过调控反应前驱体的滴加速率来控制所得TMDCs的形貌和结构. 然后采用高温热处理来提高TMDCs的结晶性, 从而提升了其电催化活性. 在酸性电解液中进行电催化析氢性能测试. 结果表明, “花状”结构的金属性二维二硫化铌(NbS₂)具有最佳的催化活性和稳定性, 在电流密度为10 mA/cm²时, 其过电位仅为146 mV, 持续工作24 h后电流密度几乎不衰减. 研究发现, 可充分暴露面内活性位点的“花状”结构以及高温处理后材料导电性的提高是二维NbS₂具有优异电催化性能的主要因素.     

Geometry‐Assisted Three‐Dimensional Superlocalization Imaging of Single‐Molecule Catalysis on Modular Multilayer Nanocatalysts

To establish the structure–catalytic property relationships of heterogeneous catalysts, a detailed characterization of the three‐dimensional (3D) distribution of active sites on a single catalyst is essential. Single‐particle catalysis of a modular multilayer catalytic platform that consists of a solid silica core, a mesoporous silica shell, and uniformly distributed Pt nanoparticles sandwiched in between these layers is presented. The first 3D high‐resolution super‐localization imaging of single fluorescent molecules produced at active sites on the core‐shell model nanocatalysts is demonstrated. The 3D mapping is aided by the well‐defined geometry and a correlation study in scanning electron microscopy and total internal reflection fluorescence and scattering microscopy. This approach can be generalized to study other nano‐ and mesoscale structures.     

不可逆费米奥托制冷循环性能分析

基于回热式不可逆奥托制冷循环和理想费米气体的状态方程,导出以费米气体为工质的奥托制冷循环的输入功、制冷量、制冷系数等重要性能参数的表达式,以此讨论费米气体的量子简并性、回热及内不可逆性对循环性能的影响,给出以理想费米气体为工质的回热式不可逆奥托制冷循环的性能特征。所得结果有助于进一步了解经典气体奥托制冷循环与量子气体奥托制冷循环的区别和联系。     

缺中子Np新核素的α衰变研究

合成远离稳定线的新核素、探索原子核存在的极限是目前核物理研究的重要课题。在中子壳N=126的最丰质子一侧,极端缺中子的超铀核素处于质子滴线和中子壳的交叉位置,合成和研究该核区核素对研究N=126壳结构的演化性质具有重要意义。基于兰州重离子加速器上的充气反冲核谱仪装置(SHANS),利用36,40Ar+185,187Re熔合蒸发反应,合成了极缺中子的219,220,223,224Np新核素,在中子壳N=126附近首次建立了Np同位素链的$ \alpha$衰变系统性,获得了N=126壳效应在Np同位素链中依然存在的实验证据。依据单质子分离能的系统性分析,确定了Np同位素链中质子滴线的位置,219Np也成为目前已知的最重的质子滴线外核素。此外,基于实验测量的反应截面,并与理论模型的计算结果相比较,讨论了进一步合成该核区其它新核素218,221,222Np的可行性。